Hi,
ich probiere immer noch meinen Dsl-Zugang unter FreeBSD zu installieren(ich habe auch schon alles was hier im Forum und anderswo an tutorials gibt ausprobiert, ich kriegs aber nicht hin ).
Ich benutze FreeBSD 4.10
Hier ist meine ppp.conf
Und hier die ppp.log vom letzten test (ich weiß das die systemzeiot/datum nicht stimmt
So nun zu meinem eigentlichen Problem(das hätt' ich jetzte beinahe vergessen ;-) )
Wenn ich ppp starte und den Befehl dial geben macht die Konsole ne neue Zeile auf sonst passiert aber nix (auch das erste P wird nicht groß)
Könnt irh mir sagen woran das liegt??
thx
Felix
ich probiere immer noch meinen Dsl-Zugang unter FreeBSD zu installieren(ich habe auch schon alles was hier im Forum und anderswo an tutorials gibt ausprobiert, ich kriegs aber nicht hin ).
Ich benutze FreeBSD 4.10
Hier ist meine ppp.conf
Code:
default:
set device PPPoE:rl0
set speed sync
set mru 1492
set mtu 1492
set crtscts off
enable lqr
set log phase tun LCP IPCP CCP Warning Error Alerta
add default HISADDR
enable dns
set authname meinusername
set authkey meinpasswort
set dial
disable deflate
disable pred1
disable vjcomp
disable acfcomp
disable protocomp
set ifaddr 192.0.0.1/0 192.0.0.2/0 0.0.0.0 0.0.0.0
set login
Und hier die ppp.log vom letzten test (ich weiß das die systemzeiot/datum nicht stimmt
Code:
Mar 16 16:07:21 ppp[156]: Phase: Using interface: tun0
Mar 16 16:07:21 ppp[156]: Phase: deflink: Created in closed state
Mar 16 16:07:21 ppp[156]: tun0: Phase: PPP Started (interactive mode).
Mar 16 16:09:13 ppp[156]: tun0: Phase: bundle: Establish
Mar 16 16:09:13 ppp[156]: tun0: Phase: deflink: closed -> opening
Mar 16 16:09:13 ppp[156]: tun0: Debug: List of netgraph node ``rl0:'' (id 1) hooks:
Mar 16 16:09:13 ppp[156]: tun0: Debug: Creating PPPoE netgraph node [1]:orphans -> ethernet
Mar 16 16:09:13 ppp[156]: tun0: Debug: Connecting netgraph socket .:tun0 -> rl0:orphans:tun0
Mar 16 16:09:13 ppp[156]: tun0: Debug: Sending PPPOE_CONNECT to .:tun0
Mar 16 16:09:13 ppp[156]: tun0: Debug: Found the following interfaces:
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 1, name "rl0"
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 2, name "lo0"
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 3, name "ppp0"
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 4, name "sl0"
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 5, name "faith0"
Mar 16 16:09:13 ppp[156]: tun0: Debug: Index 6, name "tun0"
Mar 16 16:09:13 ppp[156]: tun0: Phase: deflink: Connected!
Mar 16 16:09:13 ppp[156]: tun0: Phase: deflink: opening -> dial
Mar 16 16:09:13 ppp[156]: tun0: Phase: deflink: dial -> carrier
Mar 16 16:09:13 ppp[156]: tun0: Debug: Waiting for carrier
Mar 16 16:09:28 ppp[156]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "HNOC01-10k")
Mar 16 16:09:28 ppp[156]: tun0: Debug: Waiting for carrier
Mar 16 16:09:31 last message repeated 3 times
Mar 16 16:09:32 ppp[156]: tun0: Phase: deflink: Disconnected!
Mar 16 16:09:32 ppp[156]: tun0: Phase: deflink: carrier -> hangup
Mar 16 16:09:32 ppp[156]: tun0: Debug: deflink: Close
Mar 16 16:09:32 ppp[156]: tun0: Phase: deflink: Connect time: 19 secs: 0 octets in, 0 octets out
Mar 16 16:09:32 ppp[156]: tun0: Phase: deflink: 0 packets in, 0 packets out
Mar 16 16:09:32 ppp[156]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Tue Mar 16 16:09:13 2004
Mar 16 16:09:32 ppp[156]: tun0: Phase: deflink: hangup -> closed
Mar 16 16:09:32 ppp[156]: tun0: Debug: route_IfDelete (6)
Mar 16 16:09:32 ppp[156]: tun0: Debug: Found ff02:6::/32 fe80:6::2e0:7dff:fe7d:cbd8
Mar 16 16:09:32 ppp[156]: tun0: Debug: route_IfDelete: Skip it (pass 0)
Mar 16 16:09:32 ppp[156]: tun0: Debug: Found ff02:6::/32 fe80:6::2e0:7dff:fe7d:cbd8
Mar 16 16:09:32 ppp[156]: tun0: Debug: wrote 148: cmd = Delete, dst = ff02:6::/32, gateway = <none>
Mar 16 16:09:32 ppp[156]: tun0: Phase: bundle: Dead
Mar 16 16:10:37 ppp[156]: tun0: Debug: DoLoop done.
Mar 16 16:10:37 ppp[156]: tun0: Phase: PPP Terminated (normal).
Mar 16 16:10:37 ppp[156]: tun0: Debug: route_IfDelete (6)
Mar 16 16:10:37 ppp[156]: tun0: Debug: Radius: radius_Destroy
So nun zu meinem eigentlichen Problem(das hätt' ich jetzte beinahe vergessen ;-) )
Wenn ich ppp starte und den Befehl dial geben macht die Konsole ne neue Zeile auf sonst passiert aber nix (auch das erste P wird nicht groß)
Könnt irh mir sagen woran das liegt??
thx
Felix