sir_eidrien
Nuklearer Mailhamster...
Hallo zusammen
Der heutige Tag scheint voller Fragen und Problemchen zu sein. Habe vorhin meinen Server das erste mal mit Daten gefüllt und irgendwie bin ich beim Aufruf von gmirror status stutzig geworden:
Ein Neustart des Systems brachte mir folgende Mitteilungen in die dmesg:
Die Festplatte ist erst kanpp eine Woche im System und hat nur ca. 5h Betrieb hinter sich
Das BIOS meldet die Festplatte ordnungsgemäss und es werden keine Unregemässigkeiten angezeigt.
Ich habe in einer ersten Verzweiflung mal den Port smartmontools aus /usr/ports/sysutils/smartmontools instaliert. Ein Lauf mit dem Programm gibt folgendes aus:
Mit meinen bescheidenen Kenntnissen kann ich hier beim besten Willen nichts entdecken.
Wer kann mir einen Schupps in die richtige Richtung geben?
Besten Dank und viele Grüsse, s_e
Der heutige Tag scheint voller Fragen und Problemchen zu sein. Habe vorhin meinen Server das erste mal mit Daten gefüllt und irgendwie bin ich beim Aufruf von gmirror status stutzig geworden:
Code:
[user@test] ~/> gmirror status
Name Status Components
mirror/gm0 COMPLETE ad0
ad2
mirror/gm1 DEGRADED ad4
Ein Neustart des Systems brachte mir folgende Mitteilungen in die dmesg:
Code:
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
ad4: 239372MB <Maxtor 6V250F0 VA111610> at ata2-master SATA150
ad6: 239372MB <Maxtor 6V250F0 VA111610> at ata3-master SATA150
GEOM_MIRROR: Device gm1 created (id=2572203646).
GEOM_MIRROR: Device gm1: provider ad4 detected.
GEOM_MIRROR: Device gm1: provider ad6 detected.
[COLOR="Red"]GEOM_MIRROR: Component ad6 (device gm1) broken, skipping. [/COLOR]
Root mount waitinGEOM_MIRROR: Device gm1: provider ad4 activated.
GEOM_MIRROR: Device gm1: provider mirror/gm1 launched.
Die Festplatte ist erst kanpp eine Woche im System und hat nur ca. 5h Betrieb hinter sich
Das BIOS meldet die Festplatte ordnungsgemäss und es werden keine Unregemässigkeiten angezeigt.
Ich habe in einer ersten Verzweiflung mal den Port smartmontools aus /usr/ports/sysutils/smartmontools instaliert. Ein Lauf mit dem Programm gibt folgendes aus:
Code:
[root@test] ~/> /usr/local/sbin/smartctl -a /dev/ad6
smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 Bruce AllenHome page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6V250F0
Serial Number: V503135H
Firmware Version: VA111610
User Capacity: 251,000,193,024 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sun Jan 8 12:13:03 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2222) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 252 252 063 Pre-fail Always - 261
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 252 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 252 252 187 Pre-fail Always - 217
9 Power_On_Hours 0x0032 253 253 000 Old_age Always - 6
10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 10
189 Unknown_Attribute 0x003a 253 253 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 064 063 000 Old_age Always - 623116324
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 041 253 000 Old_age Always - 36
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 479
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 253 253 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 252 252 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0
211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
212 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@test] ~/>
Mit meinen bescheidenen Kenntnissen kann ich hier beim besten Willen nichts entdecken.
Wer kann mir einen Schupps in die richtige Richtung geben?
Besten Dank und viele Grüsse, s_e