Hallo,
ich habe mir Freebsd 5.4 installiert und gleich noch mal den Kernel angepasst.
Nun bekomme ich beim boote folgend Fehlermeldung:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p8 #1: Sun Oct 23 15:36:47 CEST 2005
root@sonne.moritz-ix.lan:/usr/src/sys/i386/compile/BEASTIE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1008.99-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536788992 (511 MB)
avail memory = 515624960 (491 MB)
netsmb_dev: loaded
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xe6000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 4.4 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xd5800000-0xd58000ff irq 9 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:84:7a:52:83
pcm0: <Creative CT5880-C> port 0xa000-0xa03f irq 5 at device 10.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
atapci1: <Promise PDC20265 UDMA100 controller> port 0x8400-0x843f,0x8800-0x8803,0x9000-0x9007,0x9400-0x9403,0x9800-0x9807 mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1440-KB 3.5" drive> on fdc0 drive 1
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROMs> at iomem 0xd4000-0xd67ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Mouse, rev 1.10/4.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
Timecounter "TSC" frequency 1008992385 Hz quality 800
Timecounters tick every 10.000 msec
ata0-slave: FAILURE - ATAPI_RESET status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=ff<ICRC,UNCORRECTABLE,MEDIA_CHANGED,NID_NOT_FOUND,MEDIA_CHANGE_REQEST,ABORTED,NO_MEDIA,ILLEGAL_LENGTH>
acd0: CDROM <CD-540E/1.0A> at ata0-master PIO4
acd1: CDRW <IDE-CD R/RW 16x10A/0.010000> at ata0-slave PIO4
ad4: 76319MB <WDC WD800BB-00DKA0/77.07W77> [155061/16/63] at ata2-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <IDE-CD R/RW 16x10A 01B0> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s1a
$
Was kann das sein.
Ich bin für jede Hilfe dankbar.
mfg
Jörg
ich habe mir Freebsd 5.4 installiert und gleich noch mal den Kernel angepasst.
Nun bekomme ich beim boote folgend Fehlermeldung:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p8 #1: Sun Oct 23 15:36:47 CEST 2005
root@sonne.moritz-ix.lan:/usr/src/sys/i386/compile/BEASTIE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1008.99-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536788992 (511 MB)
avail memory = 515624960 (491 MB)
netsmb_dev: loaded
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xe6000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 4.4 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xd5800000-0xd58000ff irq 9 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:84:7a:52:83
pcm0: <Creative CT5880-C> port 0xa000-0xa03f irq 5 at device 10.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
atapci1: <Promise PDC20265 UDMA100 controller> port 0x8400-0x843f,0x8800-0x8803,0x9000-0x9007,0x9400-0x9403,0x9800-0x9807 mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1440-KB 3.5" drive> on fdc0 drive 1
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROMs> at iomem 0xd4000-0xd67ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Mouse, rev 1.10/4.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
Timecounter "TSC" frequency 1008992385 Hz quality 800
Timecounters tick every 10.000 msec
ata0-slave: FAILURE - ATAPI_RESET status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=ff<ICRC,UNCORRECTABLE,MEDIA_CHANGED,NID_NOT_FOUND,MEDIA_CHANGE_REQEST,ABORTED,NO_MEDIA,ILLEGAL_LENGTH>
acd0: CDROM <CD-540E/1.0A> at ata0-master PIO4
acd1: CDRW <IDE-CD R/RW 16x10A/0.010000> at ata0-slave PIO4
ad4: 76319MB <WDC WD800BB-00DKA0/77.07W77> [155061/16/63] at ata2-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <IDE-CD R/RW 16x10A 01B0> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s1a
$
Was kann das sein.
Ich bin für jede Hilfe dankbar.
mfg
Jörg
