Frage zu Dual-Screen

friendofbeastie

friendofbeastie

User
moin ,

hab mir eine alte pci-GraKa eingebaut und mit Xorg -config zum laufen gebracht .
Jedoch läufts nicht ganz so wie ich`s mir gedacht hatte . (FBSD 5.4,Xorg 6.8..)

Meine Einstellungen werden auf dem Zweit-Monitor nicht richtig übernommen ,
z.B. ist die Sprache nicht komplett deutsch , sonder vermischt --> englisch-deutsch !

Ich kann mit der Maus zwar "rüberspringen" und am zeiten Monitor separat arbeiten ,
jedoch keine Fenster rüberschieben und ähnliches .
Wie kriegt man das hin ?


Hier mal meine xorg.conf :

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de_DE"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "Name" "Autodetection"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "VSN"
ModelName "S70"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
EndSection

Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor1"
VendorName "IVM"
ModelName "1703"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" # <str>
#Option "VertRefresh" # <str>
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "NoHostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "YPbPrAspectRatio" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "Rotate" # <str>
#Option "NoXvideo" # [<bool>]
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # <i>
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # <i>
#Option "PanelDelayCompensation1" # <i>
#Option "PDC" # <i>
#Option "PDC1" # <i>
#Option "EMI" # <i>
#Option "LVDSHL" # <i>
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "NoInternalModes" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "NoYV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # <i>
#Option "CHTVLumaBandwidthSVIDEO" # <i>
#Option "CHTVLumaFlickerFilter" # <i>
#Option "CHTVChromaBandwidth" # <i>
#Option "CHTVChromaFlickerFilter" # <i>
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # <i>
#Option "CHTVContrast" # <i>
#Option "SISTVEdgeEnhance" # <i>
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # <i>
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # <i>
#Option "SISTVColorCalibFine" # <i>
#Option "SISTVColorCalibCoarse" # <i>
#Option "SISTVXScale" # <i>
#Option "SISTVYScale" # <i>
#Option "TVXPosOffset" # <i>
#Option "TVYPosOffset" # <i>
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # <i>
#Option "UseColorHWCursor" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # <i>
#Option "RestoreBySetMode" # [<bool>]
#Option "NoCRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<bool>]
#Option "StoredGammaBrightness" # <str>
#Option "StoredGammaPreBrightness" # <str>
#Option "XvGamma" # <str>
#Option "XvDefaultContrast" # <i>
#Option "XvDefaultBrightness" # <i>
#Option "XvDefaultHue" # <i>
#Option "XvDefaultSaturation" # <i>
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # <i>
#Option "XvChromaMax" # <i>
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "EnableSiSCtrl" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "TwinView" # [<bool>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "NoMergedXinerama" # [<bool>]
#Option "NoTwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
Identifier "Card1"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "86C326 5598/6326"
BusID "PCI:0:13:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1152x864"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
EndSection

:confused:

thx
 
hallo nochmal ,

hab mal folgendes in xorg.conf eingfügt :

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
Option "xinerama" "true"
Option "Clone" "off"
EndSection


und -->

Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
Screen 0
Option "ConnectedMonitor" "DFP, DFP"

und -->

Identifier "Card1"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "86C326 5598/6326"
BusID "PCI:0:13:0"
Screen 1
Option "ConnectedMonitor" "DFP, DFP"


Ergebniss : Nu läuft nur noch Screen0 mit nvidia-AGP


:eek:

gruss
 
hi ,

komm nich wirklich weiter . Hab einiges probiert , nix geht !

Muss ich evtl. im BIOS unter PCI-Config. PCI/VGA Palette Snoop auf enable
schalten ? (was immer das ist)
Hab irgendwo beim google`n was drüber gelesen !

Aber xinerama funzt nicht !

grüsse

:eek:
 

Anhänge

  • dual-screen.webp
    dual-screen.webp
    47,1 KB · Aufrufe: 699
obs dir hilft, kann ich nicht sagen, aber bei mir auf der miata (kein peecee) liefs fast auf anhieb. das mit falscher sprache auf nicht-primär-glotze hatte ich auch mal, hab es aber aufs kde geschoben. das ist insgesamt noch nicht ganz xinerama-clean (zumindest in 3.3), frisst performance wie sau, wenn man nen bildschirmschoner anwirft.

aber... just for the records, hier triple-head mit 3 pci-karten in dec miata:

Code: 
Section "Module"
    Load        "dbe"   # Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "speedo"
    Load        "freetype"
    Load        "xtt"
# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
EndSection

Section "Files"
    RgbPath     "/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/pkg/lib/X11/fonts/freefont/"
    ModulePath "/usr/X11R6/lib/modules"
EndSection

Section "ServerFlags"
    Option "DontVTSwitch"
    Option "DontZap"
    Option "Dont Zoom"
    Option "DisableVidModeExtension"
    Option "Xinerama"
EndSection

Section "InputDevice"
    Identifier  "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc102"
    Option "XkbLayout"  "de"
    Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "wsmouse"
    Option "Device"      "/dev/wsmouse"
    Option "Buttons" "7"
    Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
    Identifier  "AGneovo F-419"
    HorizSync   64
    VertRefresh 60
EndSection

Section "Device"
    Identifier  "ELSA Gloria Synergy 8MB S1"
    Driver      "glint"
    BusID       "PCI:0:11:0"
EndSection

Section "Device"
    Identifier  "ELSA Gloria Synergy 8MB S2"
    Driver      "glint"
    BusID       "PCI:1:10:0"
EndSection

Section "Device"
    Identifier  "ELSA Gloria Synergy 8MB S3"
    Driver      "glint"
    BusID       "PCI:0:12:0"
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "ELSA Gloria Synergy 8MB S1"
    Monitor     "AGneovo F-419"
    DefaultDepth 24
EndSection

Section "Screen"
    Identifier  "Screen 2"
    Device      "ELSA Gloria Synergy 8MB S2"
    Monitor     "AGneovo F-419"
    DefaultDepth 24
EndSection

Section "Screen"
    Identifier  "Screen 3"
    Device      "ELSA Gloria Synergy 8MB S3"
    Monitor     "AGneovo F-419"
    DefaultDepth 24
EndSection

Section "ServerLayout"
    Identifier  "Simple Layout"
    Screen "Screen 1"
    Screen "Screen 2" Rightof "Screen 1"
    Screen "Screen 3" Rightof "Screen 2"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
 
Zuletzt bearbeitet:
thx ,

hab aber inzwischen die Karte rausgeschmissen , hat irgendwie gebremst .
Ausserdem liefen hin und wieder waagerechte, schwarze, schmale Balken
über den Monitor der an meiner AGP-Karte angeschlossen ist .

Mal schauen ob ich irgendwo N´ günstige "gute" PCI-GraKa finde .

Gefallen hat`s schon !!!!


gruss

:o
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben