FreeBSD 5.3 und USB Stick

luX162 · 7 November 2004

hey leute

ich hab nen disk2go ICEBLUE 256 MB (http://www.disk2go.com), er wird erkannt aber krieg das doch nicht gebacken ;'(

mit dmesg nachgeschaut und da steht:

umass0: M-Sys DiskOnKey, rev 2.00/2.00, addr 2

aber sonst nichts was damit zu tun hat (also da0 oder so was) .. ist der GENERIC Kernel ...

ahja: totaler neuling :rolleyes:

mfg luX162

antic_eye · 7 November 2004

hi,

es ist darauf zu achten, dass device scbus, device umass und device da im kernel sind und dann kannst du mit:

# mount_msdosfs /dev/da0s1 /mnt/stick

das teil einhängen. fstype ist selbstverst. davon abhängig, mit was das ding formatiert ist ...

dettus · 7 November 2004

hast du den stick schon explizit einmal formatiert?

ich persoenlich mag dieses hin- und hermounten von usbsticks nicht. ich wuerde dir zu den mtools raten! alles was du dafuer tun musst ist dir ein mtools.conf anzulegen, wo du einfach folgendes reinschreibst:

Code:

drive a: file="/dev/fd0"
drive b: file="/dev/da0s1"

dann gibt dir ein

Code:

% mdir b:

den inhalt des usbsticks aus. hat bei meinem mp3-player hervorragend funktioniert!

luX162 · 7 November 2004

antic_eye schrieb:
hi,

es ist darauf zu achten, dass device scbus, device umass und device da im kernel sind und dann kannst du mit:

# mount_msdosfs /dev/da0s1 /mnt/stick

das teil einhängen. fstype ist selbstverst. davon abhängig, mit was das ding formatiert ist ...

umass, scbus und da sind im kernel .. aber eben er erkennts zwar (also umass gibt meldung aus) aber es scheint als macht er nichts damit :confused:

... dateisystem ist fat ...

antic_eye · 7 November 2004

mach das ding mal im laufenden betrieb ab und wieder dran und poste mal, was in /var/log/messages steht ... achso: welches OS läuft bei dir?

luX162 · 7 November 2004

umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached

dettus · 8 November 2004

antic_eye schrieb:
mach das ding mal im laufenden betrieb ab und wieder dran und poste mal, was in /var/log/messages steht ...

gute idee!

luX162 schrieb:
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached

aber dann doch bitte die antwort nicht so kurz, ja?
schick mal folgendes: ALLES was in der /var/log/message steht, und dann boote einmal mit und einmal ohne usb-stick, und schick uns das davon dann jeweils komplette dmesg, ja?

wir helfen dir wirklich gerne, aber dafuer brauchen wir jedes bisschen information.

antic_eye schrieb:
achso: welches OS läuft bei dir?

freebsd 5.3 (steht oben *g*)

luX162 · 8 November 2004

sry .. nun hier die volle /var/log/messages: (zuerst mit und dann ohne usb-stick)

Nov 8 15:30:22 BSD syslogd: kernel boot file is /boot/kernel/kernel
Nov 8 15:30:22 BSD kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Nov 8 15:30:22 BSD kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 8 15:30:22 BSD kernel: The Regents of the University of California. All rights reserved.
Nov 8 15:30:22 BSD kernel: FreeBSD 5.3-RELEASE #0: Sun Nov 7 10:49:30 CET 2004
Nov 8 15:30:22 BSD kernel: root@BSD.NET.MSUI.TK:/usr/obj/usr/src/sys/GENERIC
Nov 8 15:30:22 BSD kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Nov 8 15:30:22 BSD kernel: CPU: Intel Celeron (597.07-MHz 686-class CPU)
Nov 8 15:30:22 BSD kernel: Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Nov 8 15:30:22 BSD kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Nov 8 15:30:22 BSD kernel: real memory = 134086656 (127 MB)
Nov 8 15:30:22 BSD kernel: avail memory = 121556992 (115 MB)
Nov 8 15:30:22 BSD kernel: bios32: Bad BIOS32 Service Directory
Nov 8 15:30:22 BSD kernel: npx0: [FAST]
Nov 8 15:30:22 BSD kernel: npx0: <math processor> on motherboard
Nov 8 15:30:22 BSD kernel: npx0: INT 16 interface
Nov 8 15:30:22 BSD kernel: acpi0: <TOSHIB 750> on motherboard
Nov 8 15:30:22 BSD kernel: acpi0: Power Button (fixed)
Nov 8 15:30:22 BSD kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
Nov 8 15:30:22 BSD kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
Nov 8 15:30:22 BSD kernel: cpu0: <ACPI CPU (2 Cx states)> on acpi0
Nov 8 15:30:22 BSD kernel: acpi_tz0: <Thermal Zone> on acpi0
Nov 8 15:30:22 BSD kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Nov 8 15:30:22 BSD kernel: pci0: <ACPI PCI bus> on pcib0
Nov 8 15:30:22 BSD kernel: agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
Nov 8 15:30:22 BSD kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Nov 8 15:30:22 BSD kernel: pci1: <ACPI PCI bus> on pcib1
Nov 8 15:30:22 BSD kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Nov 8 15:30:22 BSD kernel: isab0: <PCI-ISA bridge> at device 5.0 on pci0
Nov 8 15:30:22 BSD kernel: isa0: <ISA bus> on isab0
Nov 8 15:30:22 BSD kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
Nov 8 15:30:22 BSD kernel: ata0: channel #0 on atapci0
Nov 8 15:30:22 BSD kernel: ata1: channel #1 on atapci0
Nov 8 15:30:22 BSD kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
Nov 8 15:30:22 BSD kernel: uhci0: [GIANT-LOCKED]
Nov 8 15:30:22 BSD kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
Nov 8 15:30:22 BSD kernel: usb0: USB revision 1.0
Nov 8 15:30:22 BSD kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 8 15:30:22 BSD kernel: uhub0: 2 ports with 2 removable, self powered
Nov 8 15:30:22 BSD kernel: umass0: M-Sys DiskOnKey, rev 2.00/2.00, addr 2
Nov 8 15:30:22 BSD kernel: pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
Nov 8 15:30:22 BSD kernel: pci0: <simple comms> at device 7.0 (no driver attached)
Nov 8 15:30:22 BSD kernel: pci0: <unknown> at device 9.0 (no driver attached)
Nov 8 15:30:22 BSD kernel: cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
Nov 8 15:30:22 BSD kernel: cardbus0: <CardBus bus> on cbb0
Nov 8 15:30:22 BSD kernel: pccard0: <16-bit PCCard bus> on cbb0
Nov 8 15:30:22 BSD kernel: cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
Nov 8 15:30:22 BSD kernel: cardbus1: <CardBus bus> on cbb1
Nov 8 15:30:22 BSD kernel: pccard1: <16-bit PCCard bus> on cbb1
Nov 8 15:30:22 BSD kernel: pci0: <multimedia, audio> at device 12.0 (no driver attached)
Nov 8 15:30:22 BSD kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Nov 8 15:30:22 BSD kernel: acpi_cmbat0: <Control Method Battery> on acpi0
Nov 8 15:30:22 BSD kernel: acpi_acad0: <AC Adapter> on acpi0
Nov 8 15:30:22 BSD kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Nov 8 15:30:22 BSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Nov 8 15:30:22 BSD kernel: kbd0 at atkbd0
Nov 8 15:30:22 BSD kernel: atkbd0: [GIANT-LOCKED]
Nov 8 15:30:22 BSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Nov 8 15:30:22 BSD kernel: psm0: [GIANT-LOCKED]
Nov 8 15:30:22 BSD kernel: psm0: model IntelliMouse Explorer, device ID 4
Nov 8 15:30:22 BSD kernel: fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Nov 8 15:30:22 BSD kernel: fdc0: [FAST]
Nov 8 15:30:22 BSD kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 8 15:30:22 BSD kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Nov 8 15:30:22 BSD kernel: sio0: type 16550A
Nov 8 15:30:22 BSD kernel: ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0
Nov 8 15:30:22 BSD kernel: ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
Nov 8 15:30:22 BSD kernel: ppc0: FIFO with 16/16/8 bytes threshold
Nov 8 15:30:22 BSD kernel: ppbus0: <Parallel port bus> on ppc0
Nov 8 15:30:22 BSD kernel: plip0: <PLIP network interface> on ppbus0
Nov 8 15:30:22 BSD kernel: lpt0: <Printer> on ppbus0
Nov 8 15:30:22 BSD kernel: lpt0: Interrupt-driven port
Nov 8 15:30:22 BSD kernel: ppi0: <Parallel I/O> on ppbus0
Nov 8 15:30:22 BSD kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
Nov 8 15:30:22 BSD kernel: pmtimer0 on isa0
Nov 8 15:30:22 BSD kernel: sc0: <System console> at flags 0x100 on isa0
Nov 8 15:30:22 BSD kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 8 15:30:22 BSD kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 8 15:30:22 BSD kernel: Timecounter "TSC" frequency 597070667 Hz quality 800
Nov 8 15:30:22 BSD kernel: Timecounters tick every 10.000 msec
Nov 8 15:30:22 BSD kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0
Nov 8 15:30:22 BSD kernel: miibus0: <MII bus> on rl0
Nov 8 15:30:22 BSD kernel: rlphy0: <RealTek internal media interface> on miibus0
Nov 8 15:30:22 BSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 8 15:30:22 BSD kernel: rl0: Ethernet address: 00:30:4f:35:da:8a
Nov 8 15:30:22 BSD kernel: ad0: 38154MB <IC25N040ATMR04-0/MO2OAD4A> [77520/16/63] at ata0-master UDMA33
Nov 8 15:30:22 BSD kernel: acd0: CDROM <CD-224E-BA/7.7C> at ata1-master UDMA33
Nov 8 15:30:22 BSD kernel: Mounting root from ufs:/dev/ad0s1a
Nov 8 15:34:48 BSD shutdown: power-down by root:
Nov 8 15:34:51 BSD syslogd: exiting on signal 15

Nov 8 15:37:24 BSD syslogd: kernel boot file is /boot/kernel/kernel
Nov 8 15:37:24 BSD kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Nov 8 15:37:24 BSD kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 8 15:37:24 BSD kernel: The Regents of the University of California. All rights reserved.
Nov 8 15:37:24 BSD kernel: FreeBSD 5.3-RELEASE #0: Sun Nov 7 10:49:30 CET 2004
Nov 8 15:37:24 BSD kernel: root@BSD.NET.MSUI.TK:/usr/obj/usr/src/sys/GENERIC
Nov 8 15:37:24 BSD kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Nov 8 15:37:24 BSD kernel: CPU: Intel Celeron (597.07-MHz 686-class CPU)
Nov 8 15:37:24 BSD kernel: Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Nov 8 15:37:24 BSD kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Nov 8 15:37:24 BSD kernel: real memory = 134086656 (127 MB)
Nov 8 15:37:24 BSD kernel: avail memory = 121556992 (115 MB)
Nov 8 15:37:24 BSD kernel: bios32: Bad BIOS32 Service Directory
Nov 8 15:37:24 BSD kernel: npx0: [FAST]
Nov 8 15:37:24 BSD kernel: npx0: <math processor> on motherboard
Nov 8 15:37:24 BSD kernel: npx0: INT 16 interface
Nov 8 15:37:24 BSD kernel: acpi0: <TOSHIB 750> on motherboard
Nov 8 15:37:24 BSD kernel: acpi0: Power Button (fixed)
Nov 8 15:37:24 BSD kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
Nov 8 15:37:24 BSD kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
Nov 8 15:37:24 BSD kernel: cpu0: <ACPI CPU (2 Cx states)> on acpi0
Nov 8 15:37:24 BSD kernel: acpi_tz0: <Thermal Zone> on acpi0
Nov 8 15:37:24 BSD kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Nov 8 15:37:24 BSD kernel: pci0: <ACPI PCI bus> on pcib0
Nov 8 15:37:24 BSD kernel: agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
Nov 8 15:37:24 BSD kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Nov 8 15:37:24 BSD kernel: pci1: <ACPI PCI bus> on pcib1
Nov 8 15:37:24 BSD kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Nov 8 15:37:24 BSD kernel: isab0: <PCI-ISA bridge> at device 5.0 on pci0
Nov 8 15:37:24 BSD kernel: isa0: <ISA bus> on isab0
Nov 8 15:37:24 BSD kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
Nov 8 15:37:24 BSD kernel: ata0: channel #0 on atapci0
Nov 8 15:37:24 BSD kernel: ata1: channel #1 on atapci0
Nov 8 15:37:24 BSD kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
Nov 8 15:37:24 BSD kernel: uhci0: [GIANT-LOCKED]
Nov 8 15:37:24 BSD kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
Nov 8 15:37:24 BSD kernel: usb0: USB revision 1.0
Nov 8 15:37:24 BSD kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 8 15:37:24 BSD kernel: uhub0: 2 ports with 2 removable, self powered
Nov 8 15:37:24 BSD kernel: pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
Nov 8 15:37:24 BSD kernel: pci0: <simple comms> at device 7.0 (no driver attached)
Nov 8 15:37:24 BSD kernel: pci0: <unknown> at device 9.0 (no driver attached)
Nov 8 15:37:24 BSD kernel: cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
Nov 8 15:37:24 BSD kernel: cardbus0: <CardBus bus> on cbb0
Nov 8 15:37:24 BSD kernel: pccard0: <16-bit PCCard bus> on cbb0
Nov 8 15:37:24 BSD kernel: cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
Nov 8 15:37:24 BSD kernel: cardbus1: <CardBus bus> on cbb1
Nov 8 15:37:24 BSD kernel: pccard1: <16-bit PCCard bus> on cbb1
Nov 8 15:37:24 BSD kernel: pci0: <multimedia, audio> at device 12.0 (no driver attached)
Nov 8 15:37:24 BSD kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Nov 8 15:37:24 BSD kernel: acpi_cmbat0: <Control Method Battery> on acpi0
Nov 8 15:37:24 BSD kernel: acpi_acad0: <AC Adapter> on acpi0
Nov 8 15:37:24 BSD kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Nov 8 15:37:24 BSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Nov 8 15:37:24 BSD kernel: kbd0 at atkbd0
Nov 8 15:37:24 BSD kernel: atkbd0: [GIANT-LOCKED]
Nov 8 15:37:24 BSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Nov 8 15:37:24 BSD kernel: psm0: [GIANT-LOCKED]
Nov 8 15:37:24 BSD kernel: psm0: model IntelliMouse Explorer, device ID 4
Nov 8 15:37:24 BSD kernel: fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Nov 8 15:37:24 BSD kernel: fdc0: [FAST]
Nov 8 15:37:24 BSD kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 8 15:37:24 BSD kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Nov 8 15:37:24 BSD kernel: sio0: type 16550A
Nov 8 15:37:24 BSD kernel: ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0
Nov 8 15:37:24 BSD kernel: ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
Nov 8 15:37:24 BSD kernel: ppc0: FIFO with 16/16/8 bytes threshold
Nov 8 15:37:24 BSD kernel: ppbus0: <Parallel port bus> on ppc0
Nov 8 15:37:24 BSD kernel: plip0: <PLIP network interface> on ppbus0
Nov 8 15:37:24 BSD kernel: lpt0: <Printer> on ppbus0
Nov 8 15:37:24 BSD kernel: lpt0: Interrupt-driven port
Nov 8 15:37:24 BSD kernel: ppi0: <Parallel I/O> on ppbus0
Nov 8 15:37:24 BSD kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
Nov 8 15:37:24 BSD kernel: pmtimer0 on isa0
Nov 8 15:37:24 BSD kernel: sc0: <System console> at flags 0x100 on isa0
Nov 8 15:37:24 BSD kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 8 15:37:24 BSD kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 8 15:37:24 BSD kernel: Timecounter "TSC" frequency 597070186 Hz quality 800
Nov 8 15:37:24 BSD kernel: Timecounters tick every 10.000 msec
Nov 8 15:37:24 BSD kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0
Nov 8 15:37:24 BSD kernel: miibus0: <MII bus> on rl0
Nov 8 15:37:24 BSD kernel: rlphy0: <RealTek internal media interface> on miibus0
Nov 8 15:37:24 BSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 8 15:37:24 BSD kernel: rl0: Ethernet address: 00:30:4f:35:da:8a
Nov 8 15:37:24 BSD kernel: ad0: 38154MB <IC25N040ATMR04-0/MO2OAD4A> [77520/16/63] at ata0-master UDMA33
Nov 8 15:37:24 BSD kernel: acd0: CDROM <CD-224E-BA/7.7C> at ata1-master UDMA33
Nov 8 15:37:24 BSD kernel: Mounting root from ufs:/dev/ad0s1a

antic_eye · 8 November 2004

Code:

[ttyp2.sven@sanguis:17:05~] sudo tail -f /var/log/messages
...
Nov  8 17:12:27 sanguis kernel: umass0: USB Flash Disk, rev 2.00/2.00, addr 2
Nov  8 17:12:27 sanguis kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Nov  8 17:12:27 sanguis kernel: da0: <TinyDisk 2004-0223 2.00> Removable Direct Access SCSI-2 device 
Nov  8 17:12:27 sanguis kernel: da0: 1.000MB/s transfers
Nov  8 17:12:27 sanguis kernel: da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C)

so sieht das bei mir im laufenden betrieb aus ... dein stick wird erkannt aber ihm wird kein device zugeordnet ... bist du sicher, dass alles benötigte im kernel steht?

ich hab u.a. das drin:

Code:

...
     50 # SCSI peripherals                                                                                                                                                                                        
     51 device          scbus           # SCSI bUs (required for SCSI)                                                                                                                                            
     52 device          da                                                                                                                                                                                        
     53 #device         ch              # SCSI media changers                                                                                                                                                     
     54 #device         da              # Direct Access (disks)                                                                                                                                                   
     55 #device         sa              # Sequential Access (tape etc)                                                                                                                                            
     56 device          cd              # CD                                                                                                                                                                      
     57 device          pass            # Passthrough device (direct SCSI access)                                                                                                                                 
     58 device          ses             # SCSI Environmental Services (and SAF-TE)                                                                                                                  
...
         116 # USB support                                                                                                                                                                                             
    117 device          uhci            # UHCI PCI->USB interface                                                                                                                                                 
    118 device          ohci            # OHCI PCI->USB interface                                                                                                                                                 
    119 device          usb             # USB Bus (required)                                                                                                                                                      
    120 device          ugen            # Generic                                                                                                                                                                 
    121 device          uhid            # "Human Interface Devices"                                                                                                                                               
    122 device          ukbd            # Keyboard                                                                                                                                                                
    123 device          ulpt            # Printer                                                                                                                                                                 
    124 device          umass           # Disks/Mass storage - Requires scbus and da                                                                                                                              
    125 device          ums             # Mouse                                                                                                                                                                   
    126 device          uscanner        # Scanners                                                                                                                                                                
...

hmm ... aber wenns der GENERIC ist sollte es ja schon drinstehen ... *grübel*

sry, da muß ich erstmal in mich gehen

Dr.Sweety · 8 November 2004

Führe mal "/sbin/camcontrol rescan all" aus und schau. ob du nachher ein /dev/da? Device hast ...

luX162 · 9 November 2004

Dr.Sweety schrieb:
Führe mal "/sbin/camcontrol rescan all" aus und schau. ob du nachher ein /dev/da? Device hast ...

yo jetzt krieg ich ein /dev/da0

aber wenn ich das jetzt mounten will mit "mount /dev/da0 /mnt/usb" kommt die meldung incorrect super block :confused:

.. und wenn ichs mit mount -t msdos /dev/da0 /mnt/usb versuche kommt : /dev/da0: Invalid argument :confused:

antic_eye · 9 November 2004

Code:

# mount_msdosfs /dev/da0s1 /mnt/usb

du mußt ja die partition mounten und nicht das gerät

s-tlk · 9 November 2004

versuch mal:
mount_msdosfs /dev/da0s1 /mnt/

luX162 · 9 November 2004

boa

es funzt! thx leute!!

.. bin halt noch totaler neuling ;'(

Dr.Sweety · 9 November 2004

@lux162: ich habe im File /etc/usbd.conf folgenden Eintrag hinzugefügt/modifiziert:

Code:

device "Solid state disk"
        devname "umass[0-3]+"
        attach "/sbin/camcontrol rescan all ; /bin/chmod 0660 /dev/da0 /dev/da0s
1"

Damit wird dem Stick nun vom usbd automatisch ein nutzbares Device (dev/da0 ...) zugeordnet (siehe auch "man usbd.conf")

FreeBSD 5.3 und USB Stick

luX162

Member

antic_eye

ITist

dettus

Bicycle User

luX162

Member

antic_eye

ITist

luX162

Member

dettus

Bicycle User

luX162

Member

antic_eye

ITist

Dr.Sweety

Fnord!

luX162

Member

antic_eye

ITist

s-tlk

Lion King Fan

luX162

Member

Dr.Sweety

Fnord!

Wir schützen deine Privatsphäre