FreeBSD 6.2 (PC-BSD) Plantronics Headset

O

odenter

Well-Known Member
So,
da nun auch mein WLAN mit meinem WUSB54G funzt. *fg*.
Nun die nächste Frage.
Mein Sound funktioniert nicht, ich habe ein Plantronicsheadset.
dmesg spuckt folgendes dazu aus

Code: 
uhid1: Plantronics Plantronics Headset, rev 1.10/0.04, addr 2, iclass 1/1

Also scheint er es doch richtig erkannt zu haben oder?
Muss ich noch irgendwas installieren damit das funzt?

Wenn ich z.B. eine MP3 Datei abspielen will dann kommt folgende Fehlermeldung:
"Laden des Abspielgerätes 'XinePart' fehlgeschlagen"
Details
"Einrichtung aller Audiotreiber fehlgeschlagen"

Hier nochmal alles von dmesg
Code: 
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #76: Fri Sep 21 11:42:26 PDT 2007
    root@pcbsd:/usr/obj/usr/src/sys/PCBSD-SMP
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3211.38-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000000<LM>
  Logical CPUs per core: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2091794432 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pci4: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xd2efc000-0xd2efffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: 00:13:d4:00:8e:b4
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FAST]
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x9880-0x989f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x9c00-0x9c1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xa000-0xa01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xa080-0xa09f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd2dff800-0xd2dffbff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
p54u0: Linksys WUSB54G
uhub5: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, bus powered
uhid0: THRUSTMASTER Top Gun Afterburner, rev 1.10/1.00, addr 4, iclass 3/0
umass0: Verbatim Store'n'go U3, rev 2.00/2.00, addr 5
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xd2dffc00-0xd2dfffff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhid1: Plantronics Plantronics Headset, rev 1.10/0.04, addr 2, iclass 1/1
ums0: Microsoft Microsoft IntelliMouse� Optical, rev 1.10/1.08, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 152627MB <Seagate ST3160021A 3.06> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A102> at ata0-slave UDMA33
ad1: 190782MB <Seagate ST3200822AS 3.01> at ata2-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 1
cd0: <Verbatim Store'n'go U3 6.51> Removable CD-ROM SCSI-0 device 
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Verbatim Store'n'go U3 6.51> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 3808MB (7799551 512 byte sectors: 255H 63S/T 485C)
cam_periph_alloc: attempt to re-allocate valid device pass2 rejected
passasync: Unable to attach new device due to status 0x6: CCB request was invalid
cam_periph_alloc: attempt to re-allocate valid device cd1 rejected
cdasync: Unable to attach new device due to status 0x6
Trying to mount root from ufs:/dev/ad0s2a
mskc0: Uncorrectable PCI Express error
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
msk0: link state changed to UP
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
msk0: link state changed to DOWN
msk0: link state changed to UP
mskc0: Uncorrectable PCI Express error
p54u0: Error: (usb_transport.c) Could not receive data in p54u_reg_rw
p54u0: Error: (firmware.c) Unable to write to registers before upload
p54u0: Error: (usb_transport.c) Failed to read the ISL38XX interruption ident information
msk0: link state changed to DOWN
msk0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
p54u0: detached
p54u0: Linksys WUSB54G
p54u0: at uhub4 port 1 (addr 2) disconnected
p54u0: detached
p54u0: Linksys WUSB54G
p54u0: Ethernet address: 00:0f:66:0f:b9:03
p54u0: link state changed to UP
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: link state changed to DOWN
p54u0: link state changed to UP
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: link state changed to DOWN
p54u0: link state changed to UP
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: link state changed to DOWN
p54u0: link state changed to UP
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (440 > 431)
p54u0: Warning: (netif.c) BUG: packet larger than expected (440 > 431)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (440 > 431)
p54u0: Warning: (netif.c) BUG: packet larger than expected (440 > 431)
p54u0: Warning: (netif.c) BUG: packet larger than expected (440 > 431)
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: link state changed to DOWN
p54u0: link state changed to UP
p54u0: Warning: (netif.c) BUG: packet larger than expected (211 > 202)
p54u0: Warning: (netif.c) BUG: packet larger than expected (140 > 131)
p54u0: Warning: (netif.c) BUG: packet larger than expected (168 > 159)
p54u0: Warning: (netif.c) BUG: packet larger than expected (168 > 159)
p54u0: Warning: (netif.c) BUG: packet larger than expected (168 > 159)
 
Hi,

Ich vermute mal, dass dieses Headset eine USB-Soundkarte integriert hat, und mit denen sieht es unter FreeBSD recht schlecht aus. der uhid Treiber ist auch ein recht generischer, von der Seite kann man wahrscheinlich nichts erwarten.
 
Stimmt, es ist ein USB Headset und eine Soudkarte ist integriert.
Mh schade, also wird mir nichts anderes bleiben als mir eine richtige Soundkarte zu kaufen.
 
Also mein Plantrinics Digital DSP 400 funktioniert einwandfrei!

Einfach ein "kldload uaudio" als root und dann das Headset in den USB Port und schon wird es erkannt.
 
Funzt bei mir nicht. :(
Es kommt eine Fehlermeldung das folgendes Gerät nicht gefunden wird:
Code: 
/dev/dsp

Das gibt es auch tatsächlich nicht.
Im Handbuch steht, bei der Fehlermeldung die ich bekomme, man soll prüfen ob jemand "anderes" dieses Gerät benutzt.
Aber mit
Code: 
fstat | grep dsp
kommt einfach keine Ausgabe, ich schliesse mal daraus, das "niemand" anderes das Gerät benutzt.
 
Zuletzt bearbeitet:
Ok Danke für die Hilfe. :-P

Ich hab in die /boot/loader.conf nun einfach folgendes mit eingetragen
Code: 
uaudio_load="YES"
Und den Rechner neu gestartet, nun funzt auch mein Headset. :D
Mal schauen wie es mit dem Micro aussieht.
 
Moin,

so funzt mein Logitech USB-Headset auch, nur mit dem Mikro scheint nichts los zu sein:

Code: 
# cat /dev/sndstat 
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Installed devices:
pcm0: <NVidia MCP55 High Definition Audio Controller> at memory 0xfe024000 irq 22 kld snd_hda [20071020_0048] [MPSAFE] (1p:4v/1r:1v channels duplex default)
pcm1: <USB Audio> at ? kld snd_uaudio [GIANT] (1p:1v/0r:0v channels)
        mode 1:(output) 2ch, 16/16bit, pcm, 8000,11025,22050,44100,48000Hz
        mode 2:(output) 1ch, 16/16bit, pcm, 8000,11025,22050,44100,48000Hz

Erkennt FreeBSD nicht korrekt die Features des Headsets oder sind die irgendwo "hartgecodet" ?!

Oder...
Code: 
uaudio0: <Logitech Logitech USB Headset, class 0/0, rev 1.10/10.13, addr 3> on uhub0
uaudio0: ignored input endpoint of type adaptive
uaudio0: audio rev 1.00
pcm1: <USB Audio> on uaudio0
... hängt das mit "ignored input endpoint of type adaptive" zusammen?! anzunehmen...



Gruss, Elwood
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben