gelöst: Promise SATAII 300 TX2 mit PDC20775 chipset erfolgreich patchen

sir_eidrien · 15 Januar 2006

Guten Abend zusammen

Ich habe mir für meine SATA-Platten eine Promise SATAII 300 TX2 plus-PCI-Karte geholt, über wleche ich die Platten anschliessen möchte. Leider kann ich die Platten nicht ansprechen.

Hier meine dmesg:

Code:

[root@test] ~/> dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #0: Sun Jan 15 14:48:13 CET 2006
    root@test.annen.netz:/usr/obj/usr/src/sys/GENERIC
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2806.38-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000000<LM>
real memory  = 502202368 (478 MB)
avail memory = 482066432 (459 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.4> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <mass storage> at device 10.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe1125000-0xe112507f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:43:20:cd
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xcd7ff,0xef000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounter "TSC" frequency 2806379530 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 0 0 done
All buffers synced.
Uptime: 27m41s
GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed.
GEOM_MIRROR: Device gm0 destroyed.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #0: Sun Jan 15 14:48:13 CET 2006
    root@test.annen.netz:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <AWARD  AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2806.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000000<LM>
real memory  = 502202368 (478 MB)
avail memory = 482062336 (459 MB)
ioapic0 <Version 1.4> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x480-0x48f,0x1000-0x10df,0x10e0-0x10ff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <mass storage> at device 10.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe1125000-0xe112507f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:43:20:cd
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xcd7ff,0xef000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2806373209 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
Root mount waiting for: GMIRRORGEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.

Trying to mount root from ufs:/dev/mirror/gm0s1a
[root@test] ~/>

Hier noch die pciconf:

Code:

[root@test] ~/> pciconf -l -v
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x00031039 rev=0x00 hdr=0x01
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS648FX Virtual PCI to PCI Bridge (AGP)'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:2:0: class=0x060100 card=0x00000000 chip=0x09641039 rev=0x36 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS964 LPC Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:2:5:       class=0x01018a card=0x1b301019 chip=0x55131039 rev=0x01 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5513 EIDE Controller (A,B step)'
    class    = mass storage
    subclass = ATA
[COLOR="Red"]none0@pci0:10:0:        class=0x018000 card=0x3d73105a chip=0x3d73105a rev=0x02 hdr=0x00
    vendor   = 'Promise Technology Inc'
    class    = mass storage[/COLOR]
xl0@pci0:11:0:  class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C905C-TX Fast EtherLink for PC Management NIC'
    class    = network
    subclass = ethernet
none1@pci1:0:0: class=0x030000 card=0x1b301019 chip=0x63301039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS661FX/M661FX/760/741/M760/M741 GUI 2D/3D Accelerator'
    class    = display
    subclass = VGA
[root@test] ~/>

So wie es aussieht wird der Controller nicht von FreeBSD unterstützt. Weiss jemand ob er unter 6.0-Stable oder gar Current funktioniert? Oder was ich machen kann (ohne mir einen neuen Controller zu holen)?

Besten Dank und Grüsse, s_e

j_t · 15 Januar 2006

Der Controller wird derzeit noch nicht unterstuetzt. Du findest mittels google aber einen passenden Patch, der dafuer sorgt das PCI device dem Treiber zugeordnet wird und somit funktioniert.
Ich habe zur Stunde gerade keinen Zugriff auf den Rechner. Sorry.

sir_eidrien · 15 Januar 2006

@j_t: Besten Dank für den Tip. Dachte mir schon dass irgendwo was sein müsste. Leider hat mich Google ein Wenig im Stich gelassen (oder mein Suchstrategie war sch...e). Wo kann man den Patch finden?

Besten Dank und Grüsse, s_e

j_t · 15 Januar 2006

Bitteschoen: http://www.google.de/search?hl=de&q=freebsd+0x3d73105a&btnG=Suche&meta=

sir_eidrien · 16 Januar 2006

Guten Morgen!

Recht herzlichen Dank für Deine Informationen. Also den Patch häte ich nie gefunden - THX.

Auch auf die Gefahr hin mich als totalen Anfänger zu outen, wie spiele ich den Patch ein? In etwa so?

Code:

# cd /usr/src
# patch < /pfad/zum/patch
# make buildkernel
# make installkernel
# reboot

Besten Dank und viele Grüsse, s_e

j_t · 16 Januar 2006

Moin,

bitte lies das Handbook und die Manpage zu patch. Natuerlich kannst du diese kleinen Aenderungen auch von Hand bearbeiten.

sir_eidrien · 16 Januar 2006

Hallo j_t

Ok, werde das am Abend mal versuchen.

Danke und Gruss, s_e

sir_eidrien · 16 Januar 2006

Solved...

Guten Abend miteinander!

Also, das Problem mit meinem Controller kann als gelöst betrachtet werden.

Für die Geschichtsschreibung noch folgendes:

Code:

[root@test] ~ > locate ata-pci.h
/usr/src/sys/dev/ata/ata-pci.h
[root@test] ~ > cd /usr/src/sys/dev/ata/
[root@test] /usr/src/sys/dev/ata/ > cp ata-pci.h ata-pci.h.ORIGINAL
[root@test] /usr/src/sys/dev/ata/ > ee ata-pci.h

Dann folgenden Zusatzeintrag vornehmen:

Code:

  #define ATA_PDC20575          0x3d75105a
  #define ATA_PDC20579          0x3574105a
  #define ATA_PDC20580          0x3570105a
[COLOR="Red"]  #define ATA_PDC20775          0x3d73105a[/COLOR]
  #define ATA_PDC40518          0x3d18105a
  #define ATA_PDC20617          0x6617105a
  #define ATA_PDC20618          0x6626105a

Weiter gehts mit:

Code:

[root@test] ~ > locate ata-chipset.c
/usr/src/sys/dev/ata/ata-chipset.c
[root@test] ~ > cd /usr/src/sys/dev/ata/
[root@test] /usr/src/sys/dev/ata/ > cp ata-chipset.c ata-chipset.c.ORIGINAL
[root@test] /usr/src/sys/dev/ata/ > ee ata-chipset.c

Dann folgenden Zusatzeintrag vornehmen:

Code:

       { ATA_PDC20575,  0, PRMIO, PRCMBO2, ATA_SA150, "Promise PDC20575" },
       { ATA_PDC20579,  0, PRMIO, PRCMBO2, ATA_SA150, "Promise PDC20579" },
       { ATA_PDC20580,  0, PRMIO, PRCMBO2, ATA_SA150, "Promise PDC20580" },
[COLOR="#ff0000"]       { ATA_PDC20775,  0, PRMIO, PRCMBO2, ATA_SA150, "Promise PDC20775" },[/COLOR]
       { ATA_PDC20617,  0, PRMIO, PRPATA,  ATA_UDMA6, "Promise PDC20617" },
       { ATA_PDC20618,  0, PRMIO, PRPATA,  ATA_UDMA6, "Promise PDC20618" },
       { ATA_PDC20619,  0, PRMIO, PRPATA,  ATA_UDMA6, "Promise PDC20619" },

Und Weiter gehts mit:

Code:

[root@test] /usr/src/sys/dev/ata/ > cd /usr/src
[root@test] /usr/src/ > make buildworld
[root@test] /usr/src/ > make buildkernel
[root@test] /usr/src/ > make installkernel
[root@test] /usr/src/ > reboot

In den Single-User-Modus booten:

Code:

# fsck -p
# mount -u /
# mount -a -t ufs
# swapon -a
# cd /usr/src
# make installworld
# reboot

Jetzt sollte der Controller erkannt werden:

Code:

[root@test] ~ > dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #0: Mon Jan 16 19:48:50 CET 2006
    root@test.annen.netz:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <AWARD  AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2806.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000000<LM>
real memory  = 502202368 (478 MB)
avail memory = 482062336 (459 MB)
ioapic0 <Version 1.4> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x480-0x48f,0x1000-0x10df,0x10e0-0x10ff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
[COLOR="#ff0000"]atapci1: <Promise PDC20775 SATA150 controller> port 0xd800-0xd87f,0xdc00-0xdcff mem 0xe1122000-0xe1122fff,0xe1100000-0xe111ffff irq 18 at device 10.0 on pci0[/COLOR]
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe1125000-0xe112507f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:43:20:cd
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xcd7ff,0xef000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2806372957 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
[COLOR="#ff0000"]ad4: 239372MB <Maxtor 6V250F0 VA111610> at ata2-master SATA150
ad6: 239372MB <Maxtor 6V250F0 VA111610> at ata3-master SATA150[/COLOR]
GEOM_MIRROR: Device gm1 created (id=2572203646).
GEOM_MIRROR: Device gm1: provider ad4 detected.
GEOM_MIRROR: Device gm1: provider ad6 detected.
Root mount waiting for:GEOM_MIRROR: Device gm1: provider ad6 activated.
GEOM_MIRROR: Device gm1: provider mirror/gm1 launched.
GEOM_MIRROR: Device gm1: rebuilding provider ad4.
 GMIRROR
Trying to mount root from ufs:/dev/mirror/gm0s1a

Auch folgenden Befehl sollte was zeigen:

Code:

[root@test] ~ > pciconf -l -v
agp0@pci0:0:0:  class=0x060000 card=0x1b301019 chip=0x06611039 rev=0x11 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS661FX CPU to PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x00031039 rev=0x00 hdr=0x01
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS648FX Virtual PCI to PCI Bridge (AGP)'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:2:0: class=0x060100 card=0x00000000 chip=0x09641039 rev=0x36 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS964 LPC Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:2:5:       class=0x01018a card=0x1b301019 chip=0x55131039 rev=0x01 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5513 EIDE Controller (A,B step)'
    class    = mass storage
    subclass = ATA
[COLOR="#ff0000"]atapci1@pci0:10:0:      class=0x018000 card=0x3d73105a chip=0x3d73105a rev=0x02 hdr=0x00
    vendor   = 'Promise Technology Inc'
    class    = mass storage[/COLOR]
xl0@pci0:11:0:  class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C905C-TX Fast EtherLink for PC Management NIC'
    class    = network
    subclass = ethernet
none0@pci1:0:0: class=0x030000 card=0x1b301019 chip=0x63301039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS661FX/M661FX/760/741/M760/M741 GUI 2D/3D Accelerator'
    class    = display
    subclass = VGA

Danke speziell an j_t für den Link zum Patch!

Grüsse, s_e

0815Chaot · 16 Januar 2006

Du brauchst für so was nicht die ganze Welt neu zu bauen. Kernel kompilieren reicht völlig.

sir_eidrien · 16 Januar 2006

Aargh, und ich wollte es diesmal wirklich richtig machen ;'(

Naja, jetzt wo Du es sagst => das ansprechen der Hardware übernimmt ja der Kernel *mirindenAllerwertestenbeiss*

Schon wieder was gelernt

Danke und Gruss, s_e

thyrver · 25 Januar 2007

Nur fürs Geschichtsbuch: Der Patch ist spätestens seit 6.2 nicht mehr notwendig. Der Chip auf dem Controller hat die selbe ID wie der auf der TX4 (die Version mit 4 SATA Ports) und wird daher als solcher erkannt. Der entsprechende Treiber funktioniert bis dato ohne Probleme.

gelöst: Promise SATAII 300 TX2 mit PDC20775 chipset erfolgreich patchen

sir_eidrien

Nuklearer Mailhamster...

j_t

Alter Hase

sir_eidrien

Nuklearer Mailhamster...

j_t

Alter Hase

sir_eidrien

Nuklearer Mailhamster...

j_t

Alter Hase

sir_eidrien

Nuklearer Mailhamster...

sir_eidrien

Nuklearer Mailhamster...

0815Chaot

FreeBSD/sparc64-Tüftler

sir_eidrien

Nuklearer Mailhamster...

thyrver

till evighet

Wir schützen deine Privatsphäre