mrtonik
Well-Known Member
Hallo zusammen,
ich habe hier Problem mit einem FreeBSD 10.3 Rechner der als NFS Server dient.
Leider bleibt das System komplett stehen falls „größere“ Dateien (mehrere hundert MB) auf den Server geschaufelt werden sollen. Gibt auch keine Kernelpanic, es freezed einfach. Es hilft nur noch harter Neustart. Das Problem tritt nur auf wenn der Client per USB Ethernetadapter verbunden ist, per Wlan funktioniert es (wenn auch langsamer).
Client ist ein Ubuntu 15.10.
Bis jetzt versucht:
In den logfiles steht nichts.
Lokal auf dem Server große Dateien kopieren geht einwandfrei.
Verschiedene nfs optionen (tcp, udp, v2/v3,…), System freezed immer.
File per SSH kopieren freezed das System auch.
RAM test (memtest86), keine Fehler.
Iperf läuft einwandfrei.
bonnie++ auf die Platten losgelassen, läuft einwandfrei.
Leider weiß ich nicht so recht was ich jetzt weiter tun könnte.
Hat hier jemand eine Idee?
Beste Grüße
mrtonik
dmesg
ich habe hier Problem mit einem FreeBSD 10.3 Rechner der als NFS Server dient.
Leider bleibt das System komplett stehen falls „größere“ Dateien (mehrere hundert MB) auf den Server geschaufelt werden sollen. Gibt auch keine Kernelpanic, es freezed einfach. Es hilft nur noch harter Neustart. Das Problem tritt nur auf wenn der Client per USB Ethernetadapter verbunden ist, per Wlan funktioniert es (wenn auch langsamer).
Client ist ein Ubuntu 15.10.
Bis jetzt versucht:
In den logfiles steht nichts.
Lokal auf dem Server große Dateien kopieren geht einwandfrei.
Verschiedene nfs optionen (tcp, udp, v2/v3,…), System freezed immer.
File per SSH kopieren freezed das System auch.
RAM test (memtest86), keine Fehler.
Iperf läuft einwandfrei.
bonnie++ auf die Platten losgelassen, läuft einwandfrei.
Leider weiß ich nicht so recht was ich jetzt weiter tun könnte.
Hat hier jemand eine Idee?
Beste Grüße
mrtonik
dmesg
Code:
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p2 #0: Wed May 4 06:03:51 UTC 2016
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD Athlon(tm) II X2 240 Processor (2807.12-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f62 Family=0x10 Model=0x6 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 10737418240 (10240 MB)
avail memory = 10353094656 (9873 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <7599MS A7599100>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
random: <Software, Yarrow> initialized
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150515/tbfadt-673)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <7599MS A7599100> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe9ffc00-0xfe9fffff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fe000-0xfe9fefff irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fd000-0xfe9fdfff irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff800-0xfe9ff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fc000-0xfe9fcfff irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9f7000-0xfe9f7fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff400-0xfe9ff4ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xe800-0xe83f mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on pci2
em0: Ethernet address: 00:0e:0c:b8:54:ef
vgapci0: <VGA-compatible display> mem 0xfeb9c000-0xfeb9ffff,0xfd800000-0xfdffffff irq 22 at device 7.0 on pci2
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9f6000-0xfe9f6fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <ATI> at usbus2
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600AAJS-60B4A0 02.03A02> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WCAT24086422
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD6400AAKS-00A7B2 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY5447418
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada1: Previously was known as ad8
ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
ada2: <WDC WD6400AAKS-00A7B2 01.03B01> ATA8-ACS SATA 2.x device
ada2: Serial Number WD-WMASY4958196
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 610480MB (1250263728 512 byte sectors)
ada2: Previously was known as ad12
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1403561715 Hz quality 800
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub5: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.2: <vendor 0x0430> at usbus1
uhub7: <vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.05, addr 2> on usbus1
uhub7: 4 ports with 3 removable, bus powered
ugen1.3: <vendor 0x0430> at usbus1
ukbd0: <vendor 0x0430 Sun USB Keyboard, class 0/0, rev 2.00/1.05, addr 3> on usbus1
kbd2 at ukbd0
em0: link state changed to UP