Kein Sound, netbsd 2.0.2, auich || Kein WLAN (dlink dwl g 650)

S

salex

*BSD-Fighter
Hallo Community...

Ich habe hier auf dem NetBSD-2.0.2_STABLE Probleme mit dem Sound und mit dem WLAN...
Ich stelle diese 2 Fragen in einen gemeinsamen Thread, weil ich dann nicht 2 mal die Kernel Config posten brauche...

1. Audio
Zuerst mal, das was audio anbelangt.

In den Kernel habe ich die auich module eingebaut (diese klappten bei freebsd immer).

Doch hier gehen sie anscheinend nicht.

Ausschnitt aus der dmesg:

Code: 
eris% /sbin/dmesg|grep auich
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space

Und mixerctl und audioctl Aufrufe:
Code: 
eris% mixerctl -a
mixerctl: /dev/mixer0: Device not configured
eris% audioctl -a
audioctl: /dev/audioctl0: Device not configured

Weitere Versuche:
Code: 
eris% cat /dev/urandom > /dev/audio
zsh: device not configured: /dev/audio
eris% cat /dev/urandom > /dev/sound
zsh: device not configured: /dev/sound

Da geht also gar nichts...

2. WLAN

Ich besitze eine D-Link DWL-G650, Revision A1, das ist normallerweise Prism54. Unter FreeBSD gab es da if_pff.ko, welches man selber kompiliert hat, aber unter NetBSD habe ich noch nichts gefunden ausser wi, was aber nicht funktioniert.

Bei ifconfig steht die Karte nicht drinnen (sobald ich sie reingesteckt habe):

Code: 
sip0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:00:e2:9a:1a:4e
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet 192.168.0.103 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::200:e2ff:fe9a:1a4e%sip0 prefixlen 64 scopeid 0x1
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33196
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
strip0: flags=0 mtu 1100
strip1: flags=0 mtu 1100

wiconfig funktioniert natürlich auch nicht:
Code: 
eris% /usr/sbin/wiconfig wi0
wiconfig: SIOCGWAVELAN: Device not configured

Wenn ich die Karte reinstecke, dann erscheint:
Code: 
May 23 15:46:32 eris /netbsd: pcic_chip_socket_enable: status c
May 23 15:46:37 eris /netbsd: pcic_wait_ready: ready never happened, status = 0

3. Kernel Konfiguration

Hier meine komplette Kernel Config:

Code: 
# $NetBSD: GENERIC,v 1.595.2.11 2004/08/30 09:52:37 tron Exp $
[SIZE=2]#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include         "arch/i386/conf/std.i386"

options         INCLUDE_CONFIG_FILE     # embed config file in kernel binary

#ident          "GENERIC-$Revision: 1.595.2.11 $"

maxusers        32              # estimated number of users

# CPU support.  At least one is REQUIRED.
options         I386_CPU
options         I486_CPU
options         I586_CPU
options         I686_CPU

# CPU-related options.
options         MATH_EMULATE    # floating point emulation
options         VM86            # virtual 8086 emulation
options         USER_LDT        # user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options        PIC_DELAY

options         MTRR            # memory-type range register syscall support
# doesn't work with MP just yet..
#options        PERFCTRS        # performance-monitoring counters support

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options        CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options        CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
#       you don't want the option below ON iff you are using the
#       serial console option of the new boot strap code.
#options        CONS_OVERRIDE   # Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options        REALBASEMEM=639         # size of base memory (in KB)
#options        REALEXTMEM=15360        # size of extended memory (in KB)

# Standard system options

options         INSECURE        # disable kernel security levels - X needs this

options         RTC_OFFSET=60   # hardware clock is this many mins. west of GMT
options         NTP             # NTP phase/frequency locked loop
#options        NO_TSC_TIME     # Don't use TSC microtime, even if available.
                                # Improves time behavior under VMware.

options         KTRACE          # system call tracing via ktrace(1)
options         SYSTRACE        # system call vetting via systrace(1)

options         SYSVMSG         # System V-like message queues
options         SYSVSEM         # System V-like semaphores
#options        SEMMNI=10       # number of semaphore identifiers
#options        SEMMNS=60       # number of semaphores in system
#options        SEMUME=10       # max number of undo entries per process
#options        SEMMNU=30       # number of undo structures in system
options         SYSVSHM         # System V-like memory sharing
#options        SHMMAXPGS=2048  # 2048 pages is the default
options         P1003_1B_SEMAPHORE      # p1003.1b semaphore support

options         LKM             # loadable kernel modules

options         USERCONF        # userconf(4) support
#options        PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options         SYSCTL_INCLUDE_DESCR    # Include sysctl descriptions in kernel

# Beep when it is safe to power down the system (requires sysbeep)
options         BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options        BEEP_ONHALT_COUNT=3     # Times to beep
#options        BEEP_ONHALT_PITCH=1500  # Default frequency (in Hz)
#options        BEEP_ONHALT_PERIOD=250  # Default duration (in msecs)

# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Likely stable but not yet the default.
#options        NEW_BUFQ_STRATEGY

# Diagnostic/debugging support options
options         DIAGNOSTIC      # expensive kernel consistency checks
options         DEBUG           # expensive debugging checks/support
options         KMEMSTATS       # kernel memory statistics (vmstat -m)
options         DDB             # in-kernel debugger
#options        DDB_ONPANIC=1   # see also sysctl(8): `ddb.onpanic'
options         DDB_HISTORY_SIZE=512    # enable history editing in DDB
#options        KGDB            # remote debugger
#options        KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions    DEBUG="-g"      # compile full symbol table

# Compatibility options
options         COMPAT_NOMID    # NetBSD 0.8, 386BSD, and BSDI
options         COMPAT_09       # NetBSD 0.9
options         COMPAT_10       # NetBSD 1.0
options         COMPAT_11       # NetBSD 1.1
options         COMPAT_12       # NetBSD 1.2, 386BSD, and BSDI
options         COMPAT_13       # NetBSD 1.3, 386BSD, and BSDI
options         COMPAT_14       # NetBSD 1.4
options         COMPAT_15       # NetBSD 1.5
options         COMPAT_16       # NetBSD 1.6
options         COMPAT_43       # 4.3BSD, 386BSD, and BSDI
options         COMPAT_386BSD_MBRPART # recognize old partition ID
#options        TCP_COMPAT_42   # 4.2BSD TCP/IP bug compat. Not recommended.

options         COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
options         COMPAT_SVR4     # binary compatibility with SVR4
options         COMPAT_IBCS2    # binary compatibility with SCO and ISC
options         COMPAT_LINUX    # binary compatibility with Linux
options         COMPAT_FREEBSD  # binary compatibility with FreeBSD
#options        COMPAT_MACH     # binary compatibility with Mach binaries
#options        COMPAT_DARWIN   # binary compatibility with Darwin binaries
#options        EXEC_MACHO      # exec MACH-O binaries
options         COMPAT_PECOFF   # kernel support to run Win32 apps

# File systems
file-system     FFS             # UFS
file-system     EXT2FS          # second extended file system (linux)
file-system     LFS             # log-structured file system
file-system     MFS             # memory file system
file-system     NFS             # Network File System client
file-system     NTFS            # Windows/NT file system (experimental)
file-system     CD9660          # ISO 9660 + Rock Ridge file system
file-system     MSDOSFS         # MS-DOS file system
file-system     FDESC           # /dev/fd
file-system     KERNFS          # /kern
file-system     NULLFS          # loopback file system
file-system     OVERLAY         # overlay file system
file-system     PORTAL          # portal filesystem (still experimental)
file-system     PROCFS          # /proc
file-system     UMAPFS          # NULLFS + uid and gid remapping
file-system     UNION           # union file system
file-system     CODA            # Coda File System; also needs vcoda (below)
file-system     SMBFS           # experimental - CIFS; also needs nsmb (below)

# File system options
options         QUOTA           # UFS quotas
#options        FFS_EI          # FFS Endian Independent support
options         SOFTDEP         # FFS soft updates support.
options         NFSSERVER       # Network File System server
#options        EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
                                # immutable) behave as system flags.

# Networking options
#options        GATEWAY         # packet forwarding
options         INET            # IP + ICMP + TCP + UDP
options         INET6           # IPV6
options         IPSEC           # IP security
options         IPSEC_ESP       # IP security (encryption part; define w/IPSEC)
options         IPSEC_DEBUG     # debug for IP security
#options        MROUTING        # IP multicast routing
options         NS              # XNS
#options        NSIP            # XNS tunneling over IP
options         ISO,TPIP        # OSI
#options        EON             # OSI tunneling over IP
options         CCITT,LLC,HDLC  # X.25
options         NETATALK        # AppleTalk networking protocols
options         PPP_BSDCOMP     # BSD-Compress compression support for PPP
options         PPP_DEFLATE     # Deflate compression support for PPP
options         PPP_FILTER      # Active filter support for PPP (requires bpf)
options         PFIL_HOOKS      # pfil(9) packet filter hooks
options         IPFILTER_LOG    # ipmon(8) log support
#options        IPFILTER_DEFAULT_BLOCK  # block all packets by default
#options        TCP_DEBUG       # Record last TCP_NDEBUG packets with SO_DEBUG

#options        ALTQ            # Manipulate network interfaces' output queues
#options        ALTQ_BLUE       # Stochastic Fair Blue
#options        ALTQ_CBQ        # Class-Based Queueing
#options        ALTQ_CDNR       # Diffserv Traffic Conditioner
#options        ALTQ_FIFOQ      # First-In First-Out Queue
#options        ALTQ_FLOWVALVE  # RED/flow-valve (red-penalty-box)
#options        ALTQ_HFSC       # Hierarchical Fair Service Curve
#options        ALTQ_LOCALQ     # Local queueing discipline
#options        ALTQ_PRIQ       # Priority Queueing
#options        ALTQ_RED        # Random Early Detection
#options        ALTQ_RIO        # RED with IN/OUT
#options        ALTQ_WFQ        # Weighted Fair Queueing

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options         ACPIVERBOSE     # verbose ACPI device autoconfig messages
options         EISAVERBOSE     # verbose EISA device autoconfig messages
options         MIIVERBOSE      # verbose PHY autoconfig messages
options         PCIVERBOSE      # verbose PCI device autoconfig messages
#options        PCI_CONFIG_DUMP # verbosely dump PCI config space
options         PCMCIAVERBOSE   # verbose PCMCIA configuration messages
options         SCSIVERBOSE     # human readable SCSI error messages
options         USBVERBOSE      # verbose USB device autoconfig messages
#options        PNPBIOSVERBOSE  # verbose PnP BIOS messages
#options        PNPBIOSDEBUG    # more fulsome PnP BIOS debugging messages
options         I2OVERBOSE      # verbose I2O driver messages
options         MCAVERBOSE      # verbose MCA device autoconfig messages

options         NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# wscons options
#
# builtin terminal emulations
#options        WSEMUL_SUN              # sun terminal emulation
options         WSEMUL_VT100            # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options         WS_KERNEL_FG=WSCOL_GREEN
options         WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options         WSDISPLAY_COMPAT_PCVT           # emulate some ioctls
options         WSDISPLAY_COMPAT_SYSCONS        # emulate some ioctls
options         WSDISPLAY_COMPAT_USL            # VT handling
options         WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
options         PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
options         WSDISPLAY_DEFAULTSCREENS=7
# use a large software cursor that doesn't blink
options         PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options        VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options        VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
options         WSDISPLAY_CHARFUNCS             # mouse console support
# console scrolling support.
options WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on console
#options        VGA_RASTERCONSOLE

# Kernel root file system and dump configuration.
config          netbsd  root on ? type ?
#config         netbsd  root on sd0a type ffs
#config         netbsd  root on ? type nfs

#
# Device configuration
#

mainbus0 at root

cpu* at mainbus?
#ioapic* at mainbus?

# Doesn't do anything yet.
#p64h2apic* at pci? dev? function?      # P64H2 IOxAPIC

#apm0   at mainbus0                     # Advanced power management

# Tuning for power management, see apm(4) for more details.
#options        APM_NO_IDLE             # Don't call BIOS CPU idle function
#options        APM_V10_ONLY            # Use only the APM 1.0 calls
#options        APM_NO_POWEROFF         # Don't power off on halt(8)
#options        APM_POWER_PRINT         # Print stats on the console
#options        APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

# Advanced Control and Power Interface

# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options        MPBIOS          # configure CPUs and APICs using MPBIOS
#options        MPBIOS_SCANPCI  # find PCI roots using MPBIOS
#options        MPACPI          # configure CPUs and APICs using ACPI
                                # (acpi at mainbus must also be enabled)
#options        MPACPI_SCANPCI  # find PCI roots using MPACPI

acpi0           at mainbus0
options         ACPI_PCI_FIXUP          # PCI interrupt routing via ACPI
options         ACPI_ACTIVATE_DEV       # If set, activate inactive devices
#options        ACPICA_PEDANTIC         # force strict conformance to the Spec.
#options        ACPI_DISABLE_ON_POWEROFF        # disable acpi on power off

# ACPI devices
acpiacad*       at acpi?                # ACPI AC Adapter
acpibat*        at acpi?                # ACPI Battery
acpibut*        at acpi?                # ACPI Button
acpiec*         at acpi?                # ACPI Embedded Controller
acpilid*        at acpi?                # ACPI Lid Switch
acpitz*         at acpi?                # ACPI Thermal Zone

# Mainboard devices
com*            at acpi?                # Serial communications interface
fdc*            at acpi?                # Floppy disk controller
lpt*            at acpi?                # Parallel port
npx*            at acpi?                # Math coprocessor
pckbc*          at acpi?                # PC keyboard controller
#wss*           at acpi?                # NeoMagic 256AV in wss mode

# Sony Vaio jog dial
#spic*          at acpi?                # Sony Programmable I/O Controller
#wsmouse*       at spic?

# Toshiba Libretto devices
#vald* at acpi?

# Plug-and-Play BIOS and attached devices

pnpbios*        at mainbus?

# mainboard audio chips
ess*            at pnpbios? index ?     # ESS AudioDrive
sb*             at pnpbios? index ?     # NeoMagic 256AV in sb mode
wss*            at pnpbios? index ?     # NeoMagic 256AV in wss mode
ym*             at pnpbios? index ?     # OPL3-SA3

# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0.  A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
com*            at pnpbios? index ?     # serial ports

# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
lpt*            at pnpbios? index ?     # parallel ports

pckbc*          at pnpbios? index ?     # PC keyboard/mouse controller
fdc*            at pnpbios? index ?     # floppy controller

# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide*        at pnpbios? index ?

# PCI bus support
pci*    at mainbus? bus ?
#(# pci*        at pchb? bus ?
pci*    at ppb? bus ?

# Configure PCI using BIOS information
#options        PCIBIOS                 # PCI BIOS support
#options        PCIBIOSVERBOSE          # PCI BIOS verbose info
#options        PCIBIOS_ADDR_FIXUP      # fixup PCI I/O addresses
#options        PCIBIOS_BUS_FIXUP       # fixup PCI bus numbering
#options        PCIBIOS_INTR_FIXUP      # fixup PCI interrupt routing
#options        PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options        PCIBIOS_INTR_GUESS      # see pcibios(4)
#options        PCIINTR_DEBUG           # super-verbose PCI interrupt fixup

# System Controllers
#(# elansc* at pci? dev ? function ?    # AMD Elan SC520 System Controller

# PCI bridges
pchb*   at pci? dev ? function ?        # PCI-Host bridges
pceb*   at pci? dev ? function ?        # PCI-EISA bridges
pcib*   at pci? dev ? function ?        # PCI-ISA bridges
ichlpcib* at pci? dev ? function ?      # Intel ICH PCI-ISA w/ watchdog support
#(# pcmb*       at pci? dev ? function ?        # PCI-MCA bridges
ppb*    at pci? dev ? function ?        # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc*    at pci? dev ? function ?        # PCI "universal" comm. cards

agp*    at pchb?


# EISA bus support
eisa0   at mainbus?
eisa0   at pceb?

# ISA bus support
isa0    at mainbus?
#(# isa0        at pceb?
#(# isa0        at pcib?
isa0    at ichlpcib?

# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
#(# pcmcia* at tcic? controller ? socket ?

# MCA bus support
mca0    at mainbus?

# ISA PCMCIA controllers
pcic0   at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#(# pcic1       at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
#(# pcic2       at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
#(# tcic0       at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

# PCI PCMCIA controllers
pcic0   at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0 at isa?

# ISA Plug-and-Play PCMCIA controllers
#(# pcic*       at isapnp?

# CardBus bridge support
cbb*            at pci? dev ? function ?
cardslot*       at cbb?

# CardBus bus support
cardbus*        at cardslot?
pcmcia*         at cardslot?

# Coprocessor Support

# Math Coprocessor support
npx0    at isa? port 0xf0 irq 13        # x86 math coprocessor


# Console Devices

# ISA console
#pc0    at isa? port 0x60 irq 1         # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options        FRENCH_KBD
#options        FINNISH_KBD
options         GERMAN_KBD
#options        NORWEGIAN_KBD
# pccons-specific options:
#options        XSERVER_DDB     # PF12 gets you into DDB when X is running
options         XSERVER         # X server support


# wscons
pckbc0          at isa?                 # pc keyboard controller
pckbd*          at pckbc?               # PC keyboard
pms*            at pckbc?               # PS/2 mouse for wsmouse
#options        PMS_DISABLE_POWERHOOK   # Disable PS/2 reset on resume
#(# vga0                at isa?
vga*            at pci? dev ? function ?
#(# pcdisplay0  at isa?                 # CGA, MDA, EGA, HGA
#machfb*        at pci? dev ? function ? # ATI Mach64 framebuffer driver
wsdisplay*      at vga? console ?
#(# wsdisplay*  at pcdisplay? console ?
#wsdisplay*     at machfb? console ?
wskbd*          at pckbd? console ?
wsmouse*        at pms? mux 0

pcppi0          at isa?
sysbeep0        at pcppi?

# Serial Devices

# PCI serial interfaces
#(# com*        at puc? port ?                  # 16x50s on "universal" comm boards
#(# cy* at pci? dev ? function ?        # Cyclades Cyclom-Y serial boards
#(# cz* at pci? dev ? function ?        # Cyclades-Z multi-port serial boards

# ISA Plug-and-Play serial interfaces
#(# com*        at isapnp?                      # Modems and serial boards

# PCMCIA serial interfaces
#(# com*        at pcmcia? function ?           # Modems and serial cards

#(# pcmcom* at pcmcia? function ?               # PCMCIA multi-port serial cards
#(# com*        at pcmcom? slave ?              # ...and the slave devices

# CardBus serial interfaces
#com*   at cardbus? dev ? function ?    # Modems and serial cards

# ISA serial interfaces
#options        COM_HAYESP              # adds Hayes ESP serial board support
#(# com0        at isa? port 0x3f8 irq 4        # Standard PC serial ports
#(# com1        at isa? port 0x2f8 irq 3
#(# com2        at isa? port 0x3e8 irq 5
#com3   at isa? port 0x2e8 irq 9
#ast0   at isa? port 0x1a0 irq 5        # AST 4-port serial cards
#com*   at ast? slave ?
#boca0  at isa? port 0x100 irq 5        # BOCA 8-port serial cards
#boca0  at isa? port 0x100 irq 5        # BOCA 16-port serial cards (BB2016)
#boca1  at isa? port 0x140 irq 5        # this line is also needed for BB2016
#com*   at boca? slave ?
#tcom0  at isa? port 0x100 irq 7        # TC-800 8-port serial cards
#com*   at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10      # RT 4-port serial cards
#com*   at rtfps? slave ?
#cy0    at isa? iomem 0xd4000 irq 12    # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5       # Addonics FlexPort 8S
#com*   at addcom? slave ?
#moxa0  at isa? port 0x100 irq 5        # MOXA C168H serial card (experimental)
#com*   at moxa? slave ?

# MCA serial interfaces
#(# com*        at mca? slot ?                  # 16x50s on comm boards

# Parallel Printer Interfaces

# PCI parallel printer interfaces
lpt*    at puc? port ?                  # || ports on "universal" comm boards

# ISA parallel printer interfaces
lpt0    at isa? port 0x378 irq 7        # standard PC parallel ports
#(# lpt1        at isa? port 0x278
#(# lpt2        at isa? port 0x3bc

# Hardware monitors

# LM7[89] and compatible hardware monitors
#lm0    at isa? port 0x290              # other common ports: 0x280, 0x310

# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?


# I2O devices
#(# iop*        at pci? dev ? function ?        # I/O processor
#(# iopsp*      at iop? tid ?                   # SCSI/FC-AL ports
#(# ld* at iop? tid ?                   # block devices
#(# dpti*       at iop? tid 0                   # DPT/Adaptec control interface


# SCSI Controllers and Devices

# PCI SCSI controllers
#(# adv*        at pci? dev ? function ?        # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#(# adw*        at pci? dev ? function ?        # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#(# ahc*        at pci? dev ? function ?        # Adaptec [23]94x, aic78x0 SCSI
#(# ahd*        at pci? dev ? function ?        # Adaptec 29320, 39320 (aic790x) SCSI
#(# bha*        at pci? dev ? function ?        # BusLogic 9xx SCSI
#(# dpt*        at pci? dev ? function ?        # DPT SmartCache/SmartRAID
#(# iha*        at pci? dev ? function ?        # Initio INIC-940/950 SCSI
#(# isp*        at pci? dev ? function ?        # Qlogic ISP [12]0x0 SCSI/FibreChannel
#(# mly*        at pci? dev ? function ?        # Mylex AcceleRAID and eXtremeRAID
#(# mpt*        at pci? dev ? function ?        # LSI Fusion SCSI/FC
#(# njs*        at pci? dev ? function ?        # Workbit NinjaSCSI-32
#(# pcscp*      at pci? dev ? function ?        # AMD 53c974 PCscsi-PCI SCSI
#(# siop*       at pci? dev ? function ?        # Symbios 53c8xx SCSI
#(# esiop*      at pci? dev ? function ?        # Symbios 53c875 SCSI and newer
#options        SIOP_SYMLED             # drive the act. LED in software
#(# trm*        at pci? dev ? function ?        # Tekram DC-395U/UW/F, DC-315/U SCSI

# EISA SCSI controllers
#(# ahb*        at eisa? slot ?                 # Adaptec 174[02] SCSI
#(# ahc*        at eisa? slot ?                 # Adaptec 274x, aic7770 SCSI
#(# bha*        at eisa? slot ?                 # BusLogic 7xx SCSI
#(# dpt*        at eisa? slot ?                 # DPT EATA SCSI
#(# uha*        at eisa? slot ?                 # UltraStor 24f SCSI

# PCMCIA SCSI controllers
#(# aic*        at pcmcia? function ?           # Adaptec APA-1460 SCSI
#(# esp*        at pcmcia? function ?           # Qlogic ESP406/FAS408 SCSI

# ISA Plug-and-Play SCSI controllers
#(# aha*        at isapnp?                      # Adaptec AHA-154[02
#(# aic*        at isapnp?                      # Adaptec AHA-1520B

# ISA SCSI controllers
#(# adv0        at isa? port ? irq ? drq ?      # AdvanSys APB-514[02] SCSI
#(# aha0        at isa? port 0x330 irq ? drq ?  # Adaptec 154[02] SCSI
#(# aha1        at isa? port 0x334 irq ? drq ?
#(# ahc0        at isa? port ? irq ?            # Adaptec 284x SCSI
#(# aic0        at isa? port 0x340 irq 11       # Adaptec 152[02] SCSI
#(# bha0        at isa? port 0x330 irq ? drq ?  # BusLogic [457]4X SCSI
#(# bha1        at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0   at isa? port 0x170 irq ? drq ?  # DPT SmartCache/SmartRAID
#nca0   at isa? port 0x360 irq 15       # Port-mapped NCR 53C80 controller
#nca1   at isa? iomem 0xd8000 irq 5     # Memory-mapped controller (T128, etc.)
#(# sea0        at isa? iomem 0xc8000 irq 5     # Seagate/Future Domain SCSI
#(# uha0        at isa? port 0x330 irq ? drq ?  # UltraStor [13]4f SCSI
#(# uha1        at isa? port 0x340 irq ? drq ?
#(# wds0        at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
#(# wds1        at isa? port 0x358 irq 11 drq 5

# CardBus SCSI cards
#adv*   at cardbus? dev ? function ?    # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#ahc*   at cardbus? dev ? function ?    # Adaptec ADP-1480
#njs*   at cardbus? dev ? function ?    # Workbit NinjaSCSI-32

# MCA SCSI cards
#(# aha*        at mca? slot ?                  # Adaptec AHA-1640

# SCSI bus support
scsibus* at scsi?

# SCSI devices
sd*     at scsibus? target ? lun ?      # SCSI disk drives
#(# st* at scsibus? target ? lun ?      # SCSI tape drives
#(# cd* at scsibus? target ? lun ?      # SCSI CD-ROM drives
#(# ch* at scsibus? target ? lun ?      # SCSI autochangers
#(# ses*        at scsibus? target ? lun ?      # SCSI Enclosure Services devices
#(# ss* at scsibus? target ? lun ?      # SCSI scanners
#(# uk* at scsibus? target ? lun ?      # SCSI unknown


# RAID controllers and devices
#(# aac*        at pci? dev ? function ?        # Adaptec AAC family
#(# amr*        at pci? dev ? function ?        # AMI/LSI Logic MegaRAID
#(# cac*        at eisa? slot ?                 # Compaq EISA array controllers
#(# cac*        at pci? dev ? function ?        # Compaq PCI array controllers
#(# icp*        at pci? dev ? function ?        # ICP-Vortex GDT & Intel RAID
#(# mlx*        at pci? dev ? function ?        # Mylex DAC960 & DEC SWXCR family
#(# mlx*        at eisa? slot ?                 # Mylex DAC960 & DEC SWXCR family
#(# twe*        at pci? dev ? function ?        # 3ware Escalade RAID controllers

#(# ld* at aac? unit ?                  # logical disk devices
#(# ld* at amr? unit ?
#(# ld* at cac? unit ?
#(# ld* at icp? unit ?
#(# ld* at twe? unit ?
#(# ld* at mlx? unit ?

#(# icpsp*      at icp? unit ?                  # SCSI pass-through

# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide*         at pci? dev ? function ? flags 0x0001   # GENERIC pciide driver
#(# acardide*   at pci? dev ? function ?        # Acard IDE controllers
#(# aceride*    at pci? dev ? function ?        # Acer Lab IDE controllers
#(# artsata*    at pci? dev ? function ?        # Intel i31244 SATA controller
#(# cmdide*     at pci? dev ? function ?        # CMD tech IDE controllers
#(# cypide*     at pci? dev ? function ?        # Cypress IDE controllers
#(# geodeide*   at pci? dev ? function ?        # AMD Geode IDE controllers
#(# hptide*     at pci? dev ? function ?        # Triones/HighPoint IDE controllers
#(# optiide*    at pci? dev ? function ?        # Opti IDE controllers
piixide*        at pci? dev ? function ?        # Intel IDE controllers
#(# pdcide*     at pci? dev ? function ?        # Promise IDE controllers
#(# rccide*     at pci? dev ? function ?        # ServerWorks IDE controllers
#(# satalink*   at pci? dev ? function ?        # SiI SATALink controllers
siside*         at pci? dev ? function ?        # SiS IDE controllers
#(# slide*      at pci? dev ? function ?        # Symphony Labs IDE controllers
#(# stpcide*    at pci? dev ? function ?        # STMicro STPC IDE controllers
#(# viaide*     at pci? dev ? function ?        # VIA/AMD/Nvidia IDE controllers

# ISA Plug-and-Play IDE controllers
#(# wdc*        at isapnp?

# PCMCIA IDE controllers
#(# wdc*        at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#(# wdc0        at isa? port 0x1f0 irq 14 flags 0x00
#(# wdc1        at isa? port 0x170 irq 15 flags 0x00

# ATA (IDE) bus support
atabus* at ata?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*     at atabus? drive ? flags 0x0000

# ATA RAID configuration support, as found on some Promise controllers.
pseudo-device   ataraid
#(# ld* at ataraid? vendtype ? unit ?

# ATAPI bus support
atapibus* at atapi?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*     at atapibus? drive ? flags 0x0000       # ATAPI CD-ROM drives
sd*     at atapibus? drive ? flags 0x0000       # ATAPI disk drives
#(# st* at atapibus? drive ? flags 0x0000       # ATAPI tape drives
#(# uk* at atapibus? drive ? flags 0x0000       # ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0    at isa? port 0x3f0 irq 6 drq 2  # standard PC floppy controllers
#fdc1   at isa? port 0x370 irq ? drq ?
fd*     at fdc? drive ?                 # the drives themselves
# some machines need you to do this instead of fd*
#fd0    at fdc0 drive 0

# ISA CD-ROM devices
#mcd0   at isa? port 0x300 irq 10       # Mitsumi CD-ROM drives

# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0    at isa? port 0x308 irq 5 drq 1  # Archive and Wangtek QIC tape drives

# MCA ESDI devices
#(# edc*        at mca? slot ?                  # IBM ESDI Disk Controllers
#(# ed* at edc?


# Network Interfaces

# PCI network interfaces
#(# an* at pci? dev ? function ?        # Aironet PC4500/PC4800 (802.11)
ath*    at pci? dev ? function ?        # Atheros 5210/5211/5212 802.11
#(# atw*        at pci? dev ? function ?        # ADMtek ADM8211 (802.11)
#(# bce*        at pci? dev ? function ?        # Broadcom 4401 10/100 Ethernet
#(# bge*        at pci? dev ? function ?        # Broadcom 570x gigabit Ethernet
#(# en* at pci? dev ? function ?        # ENI/Adaptec ATM
#(# ep* at pci? dev ? function ?        # 3Com 3c59x
#(# epic*       at pci? dev ? function ?        # SMC EPIC/100 Ethernet
#(# esh*        at pci? dev ? function ?        # Essential HIPPI card
#(# ex* at pci? dev ? function ?        # 3Com 90x[BC]
#(# fpa*        at pci? dev ? function ?        # DEC DEFPA FDDI
#(# fxp*        at pci? dev ? function ?        # Intel EtherExpress PRO 10+/100B
#(# gsip*       at pci? dev ? function ?        # NS83820 Gigabit Ethernet
#hme*   at pci? dev ? function ?        # Sun Microelectronics STP2002-STQ
#(# le* at pci? dev ? function ?        # PCnet-PCI Ethernet
#(# lmc*        at pci? dev ? function ?        # Lan Media Corp SSI/HSSI/DS3
#(# mtd*        at pci? dev ? function ?        # Myson MTD803 3-in-1 Ethernet
#(# ne* at pci? dev ? function ?        # NE2000-compatible Ethernet
#(# ntwoc*      at pci? dev ? function ?        # Riscom/N2 PCI Sync Serial
#(# pcn*        at pci? dev ? function ?        # AMD PCnet-PCI Ethernet
#(# re* at pci? dev ? function ?        # Realtek 8139C+/8169/8169S/8110S
#(# rtk*        at pci? dev ? function ?        # Realtek 8129/8139
#(# sf* at pci? dev ? function ?        # Adaptec AIC-6915 Ethernet
sip*    at pci? dev ? function ?        # SiS 900/DP83815 Ethernet
#(# skc*        at pci? dev ? function ?        # SysKonnect SK9821 Gigabit Ethernet
#(# sk* at skc?                         # SysKonnect SK9821 Gigabit Ethernet
#(# ste*        at pci? dev ? function ?        # Sundance ST-201 Ethernet
#(# stge*       at pci? dev ? function ?        # Sundance/Tamarack TC9021 Gigabit
#(# ti* at pci? dev ? function ?        # Alteon ACEnic gigabit Ethernet
#(# tl* at pci? dev ? function ?        # ThunderLAN-based Ethernet
#(# tlp*        at pci? dev ? function ?        # DECchip 21x4x and clones
#(# vr* at pci? dev ? function ?        # VIA Rhine Fast Ethernet
wi*     at pci? dev ? function ?        # Intersil Prism Mini-PCI (802.11b)
#(# wm* at pci? dev ? function ?        # Intel 8254x gigabit

# EISA network interfaces
#(# ep* at eisa? slot ?                 # 3Com 3c579 Ethernet
#(# fea*        at eisa? slot ?                 # DEC DEFEA FDDI
#(# tlp*        at eisa? slot ?                 # DEC DE-425 Ethernet

# ISA Plug-and-Play network interfaces
#(# an* at isapnp?                      # Aironet 802.11
#(# ep* at isapnp?                      # 3Com 3c509 Ethernet
#(# fmv*        at isapnp?                      # Fujitsu FMV-183
#(# le* at isapnp?                      # AMD PCnet-ISA Ethernet
#(# ne* at isapnp?                      # NE2000-compatible Ethernet
#(# tr* at isapnp?                      # IBM/3COM TROPIC Token-Ring

# PCMCIA network interfaces
#(# an* at pcmcia? function ?           # Aironet PC4500/PC4800 (802.11)
#(# awi*        at pcmcia? function ?           # BayStack 650/660 (802.11FH/DS)
#(# cnw*        at pcmcia? function ?           # Xircom/Netwave AirSurfer
#(# ep* at pcmcia? function ?           # 3Com 3c589 and 3c562 Ethernet
#(# mbe*        at pcmcia? function ?           # MB8696x based Ethernet
#(# ne* at pcmcia? function ?           # NE2000-compatible Ethernet
#(# ray*        at pcmcia? function ?           # Raytheon Raylink (802.11)
#(# sm* at pcmcia? function ?           # Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr*    at pcmcia? function ?           # TROPIC based Token-Ring
wi*     at pcmcia? function ?           # Lucent/Intersil WaveLan IEEE (802.11)
#(# xi* at pcmcia? function ?           # Xircom CreditCard Ethernet

#(# mhzc*       at pcmcia? function ?           # Megahertz Ethernet/Modem combo cards
#(# com*        at mhzc?
#(# sm* at mhzc?

# ISA network interfaces
#(# ate0        at isa? port 0x2a0 irq ?                # AT1700
#(# cs0 at isa? port 0x300 iomem ? irq ? drq ?  # CS8900 Ethernet
#(# ec0 at isa? port 0x250 iomem 0xd8000 irq 9  # 3Com 3c503 Ethernet
#(# eg0 at isa? port 0x280 irq 9                # 3C505 ethernet cards
#(# el0 at isa? port 0x300 irq 9                # 3C501 ethernet cards
#(# ep* at isa? port ? irq ?                    # 3C509 ethernet cards
#(# ef0 at isa? port 0x360 iomem 0xd0000 irq 7  # 3C507
#(# ai0 at isa? port 0x360 iomem 0xd0000 irq 7  # StarLAN
#(# fmv0        at isa? port 0x2a0 irq ?                # FMV-181/182
#(# ix0 at isa? port 0x300 irq 10               # EtherExpress/16
#(# iy0 at isa? port 0x360 irq ?                # EtherExpress PRO 10 ISA
#(# lc0 at isa? port 0x320 iomem ? irq ?        # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5     # DEPCA
#le*    at depca?
#(# nele0       at isa? port 0x320 irq 9 drq 7          # NE2100
#(# le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1  # Riscom/N2 sync serial
#(# bicc0       at isa? port 0x320 irq 10 drq 7         # BICC IsoLan
#(# le* at bicc?
#(# ne0 at isa? port 0x280 irq 9                # NE[12]000 ethernet cards
#(# ne1 at isa? port 0x300 irq 10
#(# sm0 at isa? port 0x300 irq 10               # SMC91C9x Ethernet
#(# tr0 at isa? port 0xa20 iomem 0xd8000 irq ?  # IBM TROPIC based Token-Ring
#(# tr1 at isa? port 0xa24 iomem 0xd0000 irq ?  # IBM TROPIC based Token-Ring
#(# tr* at isa? port ? irq ?                    # 3COM TROPIC based Token-Ring
#(# we0 at isa? port 0x280 iomem 0xd0000 irq 9  # WD/SMC Ethernet
#(# we1 at isa? port 0x300 iomem 0xcc000 irq 10

# CardBus network cards
ath*    at cardbus? dev ? function ?    # Atheros 5210/5211/5212 802.11
#atw*   at cardbus? dev ? function ?    # ADMtek ADM8211 (802.11)
#ex*    at cardbus? dev ? function ?    # 3Com 3C575TX
fxp*    at cardbus? dev ? function ?    # Intel i8255x
#rtk*   at cardbus? dev ? function ?    # Realtek 8129/8139
#tlp*   at cardbus? dev ? function ?    # DECchip 21143

# MCA network cards
#(# elmc*       at mca? slot ?                  # 3Com EtherLink/MC (3c523)
#(# ep* at mca? slot ?                  # 3Com EtherLink III (3c529)
#(# we* at mca? slot ?                  # WD/SMC Ethernet
#(# ate*        at mca? slot ?                  # Allied Telesis AT1720
#(# ne* at mca? slot ?                  # Novell NE/2 and clones
#(# tr* at mca? slot ?                  # IBM Token Ring adapter
#(# le* at mca? slot ?                  # SKNET Personal/MC2+

# MII/PHY support
#(# acphy*      at mii? phy ?                   # Altima AC101 and AMD Am79c874 PHYs
#(# amhphy* at mii? phy ?                       # AMD 79c901 Ethernet PHYs
#(# bmtphy* at mii? phy ?                       # Broadcom BCM5201 and BCM5202 PHYs
#(# brgphy* at mii? phy ?                       # Broadcom BCM5400-family PHYs
#(# dmphy*      at mii? phy ?                   # Davicom DM9101 PHYs
#(# exphy*      at mii? phy ?                   # 3Com internal PHYs
#(# gentbi* at mii? phy ?                       # Generic Ten-Bit 1000BASE-[CLS]X PHYs
#(# glxtphy* at mii? phy ?                      # Level One LXT-1000 PHYs
#(# gphyter* at mii? phy ?                      # NS83861 Gig-E PHY
icsphy* at mii? phy ?                   # Integrated Circuit Systems ICS189x
#(# igphy*      at mii? phy ?                   # Intel IGP01E1000
#(# inphy*      at mii? phy ?                   # Intel 82555 PHYs
#(# iophy*      at mii? phy ?                   # Intel 82553 PHYs
#(# lxtphy* at mii? phy ?                       # Level One LXT-970 PHYs
#(# makphy* at mii? phy ?                       # Marvell Semiconductor 88E1000 PHYs
#(# nsphy*      at mii? phy ?                   # NS83840 PHYs
#(# nsphyter* at mii? phy ?             # NS83843 PHYs
#(# pnaphy* at mii? phy ?                       # generic HomePNA PHYs
#(# qsphy*      at mii? phy ?                   # Quality Semiconductor QS6612 PHYs
#(# sqphy*      at mii? phy ?                   # Seeq 80220/80221/80223 PHYs
#(# tlphy*      at mii? phy ?                   # ThunderLAN PHYs
#(# tqphy*      at mii? phy ?                   # TDK Semiconductor PHYs
#(# ukphy*      at mii? phy ?                   # generic unknown PHYs
#(# urlphy* at mii? phy ?                       # Realtek RTL8150L internal PHYs


# USB Controller and Devices

# PCI USB controllers
ehci*   at pci? dev ? function ?        # Enhanced Host Controller
ohci*   at pci? dev ? function ?        # Open Host Controller
uhci*   at pci? dev ? function ?        # Universal Host Controller (Intel)

# CardBus USB controllers
ehci*   at cardbus? dev ? function ?    # Enhanced Host Controller
ohci*   at cardbus? dev ? function ?    # Open Host Controller

# ISA USB controllers
#slhci0 at isa? port 0x300 irq 5        # ScanLogic SL811HS

# USB bus support
usb*    at ehci?
usb*    at ohci?
usb*    at uhci?
#usb*   at slhci?

# USB Hubs
uhub*   at usb?
#(# uhub*       at uhub? port ? configuration ? interface ?

# USB HID device
uhidev* at uhub? port ? configuration ? interface ?

# USB Mice
ums*    at uhidev? reportid ?
wsmouse* at ums? mux 0

# USB Keyboards
#(# ukbd*       at uhidev? reportid ?
#(# wskbd*      at ukbd? console ? mux 1

# USB Generic HID devices
uhid*   at uhidev? reportid ?

# USB Printer
#(# ulpt*       at uhub? port ? configuration ? interface ?

# USB Modem
#(# umodem*     at uhub? port ? configuration ?
#(# ucom*       at umodem?

# USB Mass Storage
umass*  at uhub? port ? configuration ? interface ?
#(# wd* at umass?

# USB audio
uaudio* at uhub? port ? configuration ?

# USB MIDI
#(# umidi* at uhub? port ? configuration ?

# USB IrDA
# USB-IrDA bridge spec
#(# uirda* at uhub? port ? configuration ? interface ?
#(# irframe* at uirda?

#(# ustir* at uhub? port ?
#(# irframe* at ustir?

# USB Ethernet adapters
#(# aue*        at uhub? port ?         # ADMtek AN986 Pegasus based adapters
#(# cue*        at uhub? port ?         # CATC USB-EL1201A based adapters
#(# kue*        at uhub? port ?         # Kawasaki LSI KL5KUSB101B based adapters
#(# uax*        at uhub? port ?         # ASIX AX88172 based adapters
#(# udav*       at uhub? port ?         # Davicom DM9601 based adapters
#(# url*        at uhub? port ?         # Realtek RTL8150L based adapters

# Prolific PL2301/PL2302 host-to-host adapter
#(# upl*        at uhub? port ?

# Serial adapters
#(# ubsa*       at uhub? port ?         # Belkin serial adapter
#(# ucom*       at ubsa? portno ?

#(# uftdi*      at uhub? port ?         # FTDI FT8U100AX serial adapter
#(# ucom*       at uftdi? portno ?

#(# umct*       at uhub? port ?         # MCT USB-RS232 serial adapter
#(# ucom*       at umct? portno ?

#(# uplcom* at uhub? port ?     # I/O DATA USB-RSAQ2 serial adapter
#(# ucom*       at uplcom? portno ?

#(# uvscom* at uhub? port ?     # SUNTAC Slipper U VS-10U serial adapter
#(# ucom*       at uvscom? portno ?

# Diamond Multimedia Rio 500
#(# urio*       at uhub? port ?

# USB Handspring Visor
#(# uvisor*     at uhub? port ?
#(# ucom*       at uvisor?

# USB scanners
#(# uscanner* at uhub? port ?

# USB scanners that use SCSI emulation, e.g., HP5300
#(# usscanner* at uhub? port ?

# Y@P firmware loader
#(# uyap* at uhub? port ?

# D-Link DSB-R100 USB radio
#(# udsbr*      at uhub? port ?
#(# radio*      at udsbr?

# USB Generic driver
ugen*   at uhub? port ?


# IrDA and Consumer Ir devices

# Toshiba Oboe
#(# oboe*       at pci? dev ? function ?
#(# irframe* at oboe?

# PCI IEEE1394 controllers
fwohci* at pci? dev ? function ?        # IEEE1394 Open Host Controller

# CardBus IEEE1394 controllers
fwohci* at cardbus? dev ? function ?    # IEEE1394 Open Host Controller

#fw*    at fwbus?                       # IP over 1394

# IEEE1394 nodes
#fwnode* at fwbus? idhi ? idlo ?
#sbpscsi* at fwnode?
#scsibus* at sbpscsi?

# Audio Devices

# PCI audio devices
auich*  at pci? dev ? function ?        # Intel ICH integrated AC'97 Audio
#(# autri*      at pci? dev ? function ?        # Trident 4DWAVE based AC'97 Audio
#(# auvia*      at pci? dev ? function ?        # VIA VT82C686A integrated AC'97 Audio
#(# clcs*       at pci? dev ? function ?        # Cirrus Logic CS4280
#(# clct*       at pci? dev ? function ?        # Cirrus Logic CS4281
#(# cmpci*      at pci? dev ? function ?        # C-Media CMI8338/8738
#(# eap*        at pci? dev ? function ?        # Ensoniq AudioPCI
#(# emuxki* at pci? dev ? function ?    # Creative SBLive! and PCI512
#(# esa*        at pci? dev ? function ?        # ESS Allegro-1 / Maestro-3 PCI Audio
#(# esm*        at pci? dev ? function ?        # ESS Maestro-1/2/2e PCI Audio Accelerator
#(# eso*        at pci? dev ? function ?        # ESS Solo-1 PCI AudioDrive
#(# fms*        at pci? dev ? function ?        # Forte Media FM801
#(# neo*        at pci? dev ? function ?        # NeoMagic 256 AC'97 Audio
#(# sv* at pci? dev ? function ?        # S3 SonicVibes
#(# yds*        at pci? dev ? function ?        # Yamaha DS-1 PCI Audio

# ISA Plug-and-Play audio devices
#(# ess*        at isapnp?                      # ESS Tech ES1887, ES1888, ES888 audio
#(# guspnp* at isapnp?                  # Gravis Ultra Sound PnP audio
#(# sb* at isapnp?                      # SoundBlaster-compatible audio
#(# wss*        at isapnp?                      # Windows Sound System
#(# ym* at isapnp?                      # Yamaha OPL3-SA3 audio

# ISA audio devices
# the "aria" probe might give false hits
#aria0  at isa? port 0x290 irq 10               # Aria
#ess0   at isa? port 0x220 irq 5 drq 1 drq2 5   # ESS 18XX
#(# gus0        at isa? port 0x220 irq 7 drq 1 drq2 6   # Gravis Ultra Sound
#(# pas0        at isa? port 0x220 irq 7 drq 1          # ProAudio Spectrum
#pss0   at isa? port 0x220 irq 7 drq 6          # Personal Sound System
#sp0    at pss0 port 0x530 irq 10 drq 0         #       sound port driver
#(# sb0 at isa? port 0x220 irq 5 drq 1 drq2 5   # SoundBlaster
#(# wss0        at isa? port 0x530 irq 10 drq 0 drq2 1  # Windows Sound System

# PCMCIA audio devices
#esl*   at pcmcia? function ?                   # ESS 1688 AudioDrive

#cms0   at isa? port 0x220                      # Creative Music System

# OPL[23] FM synthesizers
#opl0   at isa? port 0x388      # use only if not attached to sound card
#(# opl*        at cmpci? flags 1
#opl*   at esl?
#(# opl*        at eso?
#(# opl*        at ess?
#(# opl*        at fms?
#(# opl*        at sb?
#(# opl*        at sv?
#(# opl*        at wss?
#(# opl*        at yds?
#(# opl*        at ym?

# Audio support
audio*  at audiobus?

# MPU 401 UARTs
#mpu*   at isa? port 0x330 irq 9        # MPU401 or compatible card
#(# mpu*        at cmpci?
#(# mpu*        at eso?
#(# mpu*        at fms?
#(# mpu*        at sb?
#(# mpu*        at yds?
#(# mpu*        at ym?

# MIDI support
#(# midi*       at midibus?
midi*   at pcppi?               # MIDI interface to the PC speaker

# The spkr driver provides a simple tone interface to the built in speaker.
spkr0   at pcppi?               # PC speaker


# FM-Radio devices
# ISA radio devices
#az0    at isa? port 0x350      # Aztech/PackardBell FM Radio Card
#az1    at isa? port 0x358
#rt0    at isa? port 0x20c      # AIMS Lab Radiotrack & compatible
#rt1    at isa? port 0x284
#rt2    at isa? port 0x30c
#rt3    at isa? port 0x384
#rtii0  at isa? port 0x20c      # AIMS Lab Radiotrack II FM Radio Card
#rtii1  at isa? port 0x30c
#sf2r0  at isa? port 0x384      # SoundForte RadioLink SF16-FMR2 FM Radio Card

# PCI radio devices
#gtp*   at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card

# Radio support
#radio* at az?
#radio* at gtp?
#radio* at rt?
#radio* at rtii?
#radio* at sf2r?
# TV cards

# Brooktree 848/849/878/879 based TV cards
#(# bktr* at pci? dev ? function ?
#(# radio* at bktr?


# Mice

# ISA busmice
#(# lms0        at isa? port 0x23c irq 5        # Logitech bus mouse
#(# lms1        at isa? port 0x238 irq 5
#(# mms0        at isa? port 0x23c irq 5        # Microsoft InPort mouse
#(# mms1        at isa? port 0x238 irq 5
#(# wsmouse*    at lms? mux 0
#(# wsmouse*    at mms? mux 0


# Cryptographic Devices

# PCI cryptographic devices
#(# hifn*       at pci? dev ? function ?        # Hifn 7755/7811/795x
#(# ubsec*      at pci? dev ? function ?        # Broadcom 5501/5601/580x/582x


# Joysticks

joy*    at pnpbios? index ?             # Game port

# ISA Plug-and-Play joysticks
joy*    at isapnp?                      # Game ports (usually on audio cards)

# PCI joysticks
joy*    at pci?                         # Game ports (usually on audio cards)
#(# joy*        at eso?                         # ESS Solo-1 on-board joystick

# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0   at isa? port 0x201


# Miscellaneous Devices

# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1


# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#(# weasel* at pci?

# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"


# Pseudo-Devices

pseudo-device   crypto          # opencrypto framework

# disk/mass storage pseudo-devices
pseudo-device   ccd             4       # concatenated/striped disk devices
pseudo-device   cgd             4       # cryptographic disk devices
pseudo-device   raid            8       # RAIDframe disk driver
options         RAID_AUTOCONFIG         # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options        RF_INCLUDE_EVENODD=1
#options        RF_INCLUDE_RAID5_RS=1
#options        RF_INCLUDE_PARITYLOGGING=1
#options        RF_INCLUDE_CHAINDECLUSTER=1
#options        RF_INCLUDE_INTERDECLUSTER=1
#options        RF_INCLUDE_PARITY_DECLUSTERING=1
#options        RF_INCLUDE_PARITY_DECLUSTERING_DS=1

# Vinum
# pseudo-device vinum           8       # Vinum
# options       VINUMDEBUG

pseudo-device   md              1       # memory disk device (ramdisk)
pseudo-device   vnd             4       # disk-like interface to files

# network pseudo-devices
pseudo-device   bpfilter        8       # Berkeley packet filter
pseudo-device   ipfilter                # IP filter (firewall) and NAT
pseudo-device   loop                    # network loopback
pseudo-device   ppp             2       # Point-to-Point Protocol
pseudo-device   pppoe                   # PPP over Ethernet (RFC 2516)
pseudo-device   sl              2       # Serial Line IP
pseudo-device   strip           2       # Starmode Radio IP (Metricom)
pseudo-device   irframetty              # IrDA frame line discipline
pseudo-device   tun             2       # network tunneling over tty
pseudo-device   gre             2       # generic L3 over IP tunnel
pseudo-device   gif             4       # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device  faith           1       # IPv[46] tcp relay translation i/f
#pseudo-device  stf             1       # 6to4 IPv6 over IPv4 encapsulation
pseudo-device   vlan                    # IEEE 802.1q encapsulation
pseudo-device   bridge                  # simple inter-network bridging
#options        BRIDGE_IPF              # bridge uses IP/IPv6 pfil hooks too

# miscellaneous pseudo-devices
pseudo-device   pty                     # pseudo-terminals
pseudo-device   tb              1       # tablet line discipline
pseudo-device   sequencer       1       # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device   rnd                     # /dev/random and in-kernel generator
#options        RND_COM                 # use "com" randomness as well (BROKEN)
pseudo-device   clockctl                # user control of clock subsystem

# a pseudo device needed for Coda       # also needs CODA (above)
pseudo-device   vcoda           4       # coda minicache <-> venus comm.

# a pseudo device needed for SMBFS
pseudo-device   nsmb                    # experimental - SMB requester

# wscons pseudo-devices
pseudo-device   wsmux                   # mouse & keyboard multiplexor
pseudo-device   wsfont
pseudo-device   ksyms                   # /dev/ksyms
[/SIZE]
 
So, mein dmesg:

Code: 
NetBSD 2.0.2_STABLE (ERIS) #1: Mon May 23 14:51:27 CEST 2005
        root@eris.home:/usr/src/sys/arch/i386/compile/ERIS
total memory = 509 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xfd600
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2523.21 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A): ACPI Battery (Control Method)
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configu
red
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0303-1): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13-0): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
lpt1 at acpi0 (PNP0400)
lpt1: io 0x378-0x37f irq 7
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 646 Host Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M9 (rev. 0x
01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-6 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x04)
fwohci0 at pci0 dev 2 function 3: Silicon Integrated System product 0x7007 
(rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.0, 00:01:24:10:32:0e:b1:f3, 400Mb/s, 2048 max_rec, 4 ir_ctx
, 6 it_ctx
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6645DX IDE controller (rev. 0x00
)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
Silicon Integrated System product 0x7013 (modem communications, revision 0x
a0) at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB hos
t controller (rev. 0x0f)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB hos
t controller (rev. 0x0f)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB hos
t controller (rev. 0x0f)
ohci2: interrupting at irq 11
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host
 controller (rev. 0x00)
ehci0: interrupting at irq 11
ehci0: EHCI version ff.ff
ehci0: wrong number of companions (15 != 3)
ehci0: init failed, error=13
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at irq 11
sip0: Ethernet address 00:00:e2:9a:1a:4e
icsphy0 at sip0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 9 function 0: ENE Technology, Inc. CB1420 Cardbus Controll
er (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 9 function 1: ENE Technology, Inc. CB1420 Cardbus Controll
er (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt
isa at pcib0 not configured
isa0 at mainbus0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL-DF) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc1 drive 0: density unknown
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..5..10
pcic0: using irq 3 for socket events
raidattach: Asked for 8 units
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
fw at fwohci0 not configured
pcic_chip_socket_enable: status c
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: ACROX Combo Mouse, rev 1.00/5.50, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <TOSHIBA MK4018GAS>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sector
s
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA
 data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-242, , UX10> cdrom removab
le
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
data transfers)
pcic_wait_ready: ready never happened, status = 0c
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
set{u,g}id pid 854 (netstat) was invoked by uid 1000 ppid 110 (gaim) with f
d 0 closed
acpibat0: battery info:     , Lion, Bat12Cell, 236
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
 
Deine CBB (Cardbusbridge) wird nicht benutzt (warum? da fehlt mir die erfahrung) warum er trotzdem was findet ist schon verwunderlich
 
Versuch mal ob du die Interupts manuell vergeben kannst. Aber alles ohne gewähr. Bin kein Profi
 
Ich versuche zuerst mal in der Config an

#ioapic* at mainbus?

# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options MPBIOS # configure CPUs and APICs using MPBIOS
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
#options MPACPI # configure CPUs and APICs using ACPI
# (acpi at mainbus must also be enabled)
#options MPACPI_SCANPCI # find PCI roots using MPACPI

acpi0 at mainbus0
options ACPI_PCI_FIXUP # PCI interrupt routing via ACPI
options ACPI_ACTIVATE_DEV # If set, activate inactive devices
#options ACPICA_PEDANTIC # force strict conformance to the Spec.
#options ACPI_DISABLE_ON_POWEROFF # disable acpi on power off

rumzuschrauben...
Bei dem Audioproblem scheint es ja was mit i/o zu sein...
 
Nein, geht auch nicht.


Versuch mal ob du die Interupts manuell vergeben kannst. Aber alles ohne gewähr. Bin kein Profi
Zum Vergrößern anklicken....

von was sprichst du jetzt eigentlich? Willst du das Soundproblemn lösen oder das WLAN Problem?

Wie soll ich es ändern und was soll ich da genau machen.
 
in deiner dmesg steht
cbb0 NOT USED because of unconfigured interrupt
das gleiche bei cbb1

für mich sieht das aus als würde er die WLANKarte erkennen sobald der cbb einen Interuppt zugewiesen bekommt
 
Yeah, also du musst PCIBIOS in den Kernel einbauen.

Jetzt erscheint folgendes, wenn ich die Karte reinstecke:
May 24 00:22:38 eris /netbsd: cardbus_mapreg_map called: cardbus1 0
May 24 00:22:38 eris /netbsd: cardbus_mapreg_map: physaddr 40002000
May 24 00:22:38 eris /netbsd: cardbus1: unmap mem space
May 24 00:22:38 eris /netbsd: D-Link, AirPlus DWL-G650 Wireless Cardbus, -, - (manufacturer 0x0, product 0x0) Intersil Intersil PRISM-54 Mini-PCI WLAN (miscellaneous network, revision 0x01) at cardbus1 dev 0 function 0 not configured

Sieht doch schon seeehr gut aus! Aber unter ifconfig -a oder unter wiconfig wird noch kein neues Interface angezeigt.


Zu meinem Audio Problem gibts da Lösungsvorschläge?
 
Ok, also Sound geht jetzt.7

Es fehlte die Option PNPBIOS_*_FIXUP , bzw. ACPI_*_FIXUP (* ist eine Variable).


Jetzt müsste nur noch WLAN gehen.
 
salex schrieb:
Sieht doch schon seeehr gut aus! Aber unter ifconfig -a oder unter wiconfig wird noch kein neues Interface angezeigt.
Zum Vergrößern anklicken....

Die Fehlermeldung sagt, das er zwar die Karte erkennt, aber keinen Treiber findet bzw. hat. Irgendwie fehlt da noch was im Kernel.
Sorry aber ich kann nicht finden ob Prism54 von NetBSD überhaupt unterstützt wird.
Ein Layersystem das ähnlich wie FreeBSD Linuxtreiber unterstützt ist afaik erst für eine spätere Ausgabe (2.1 oder 3.0) geplant.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben