Kennt sich denn keiner mit NetBSD und SMP aus ?

[kraekers]

Hallo,

ich stehe wirklich aufm Schlauch. Ich komme mit NetBSD einfach nicht weiter. Ich habe SMP Unerstützung im Kernel aktiviert, jedoch zeigt mir mein Rechner beim Booten immer nur cpu0 mitt allen featerures an als boot processor.

cpu1 zeigt er mir mein System beim Booten immer als application processor an, jedoch mit dem Hinweis cpu1: not started, das ist doch nicht normal oder ?

Hat denn keiner einer Idee.

Viele Grüße
kraekers

 

[*Sheep]

GENERIC.mp sollte Dein Freund sein...

 

[kraekers]

Da habe ich ja auch schon reingeschaut und die Parameter übernommen.

Meine Frage ist jedoch, warum CPU1 als not started angezeigt wird, ob das normal ist ?

GENERIC.MP ist nicht sehr aussagekräftig.

 

[*Sheep]

genau so aussagekräftig wie Deine Problembeschreibung...aber warum bootest Du nicht einfach GENERIC.MP?

 

[kraekers]

Mein dmesg mit meinem selbst gebauten Kernel + Optionen aus dem GENERIC.MP sieht wie folgt aus :

NetBSD 2.0 (NETSRV) #4: Sun Jan 23 17:38:45 CET 2005
 root@netsrv.homenet:/usr/src/sys/arch/i386/compile/NETSRV
total memory = 1023 MB
avail memory = 996 MB
BIOS32 rev. 0 found at 0xfd7a0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 3411.22 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,00050000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0100 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: using exception 16
PNP0800 at acpi0 not configured
PNP0A05 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 648 Host Bridge (rev. 0x51)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System product 0x0003 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation product 0x0342 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System product 0x0964 (rev. 0x36)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6648 IDE controller (rev. 0x01)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at siside0 channel 1
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at ioapic0 pin 20 (irq 9)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at ioapic0 pin 21 (irq 11)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci2: interrupting at ioapic0 pin 22 (irq 10)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: interrupting at ioapic0 pin 23 (irq 9)
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Silicon Integra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 5 function 0
pciide0: Silicon Integrated System product 0x0180 (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 17 (irq 9) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus3 at pciide0 channel 1
fwohci0 at pci0 dev 8 function 0: Lucent Technologies FW322/323 IEEE 1394 OHCI Controller (rev. 0x61)
fwohci0: interrupting at ioapic0 pin 19 (irq 5)
fwohci0: OHCI 1.0, 00:30:05:31:00:0d:89:7c, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
emuxki0 at pci0 dev 14 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x0a)
emuxki0: interrupting at ioapic0 pin 19 (irq 5)
emuxki0: ac97: SigmaTel unknown (0x83847658) codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id bc7<AC97_23,AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at emuxki0: full duplex, mmap, independent
joy1 at pci0 dev 14 function 1: Creative Labs PCI Gameport Joystick (rev 0x0a)
joy1: joystick connected
rtk0 at pci0 dev 16 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at ioapic0 pin 16 (irq 11)
rtk0: Ethernet address 00:00:1c:d5:03:f1
OUI 0x000000 model 0x0000 rev 0 at rtk0 phy 7 not configured
bktr0 at pci0 dev 20 function 0
bktr0: interrupting at ioapic0 pin 18 (irq 11)
bktr0: TerraTVplus, Temic NTSC tuner.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x11) at pci0 dev 20 function 1 not configured
isa0 at pcib0
joy0 at isa0 port 0x201
joy0: joystick not connected
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc1 drive 0: density unknown
Kernelized RAIDframe activated
fw0 at fwohci0: 00:30:05:31:00:0d:89:7c:0a:02:ff:ff:f0:01:00:00
wd0 at atabus0 drive 0: <SAMSUNG SP1604N>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <SAMSUNG SP1604N>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1(siside0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8163B, , 0F21> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <_NEC DVD_RW ND-2500A, , 1.07> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(siside0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
ulpt0 at uhub1 port 1 configuration 1 interface 0
ulpt0: HP Deskjet 6500, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uscanner0 at uhub2 port 1
uscanner0: Canon CanoScan, rev 1.10/1.00, addr 2
umass0 at uhub3 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
ehci_idone: need toggle update status=80018d40 nstatus=80008c80
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <HDS72251, 6VLAT80, 0\0000> disk fixed
sd0: 153 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
umass1 at uhub3 port 7 configuration 1 interface 0
umass1: Genesys Logic Flash Reader, rev 2.00/1.25, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 4 luns per target
sd1 at scsibus1 target 0 lun 0: <Generic, STORAGE DEVICE, 0125> disk removable
sd1: drive offline
sd2 at scsibus1 target 0 lun 1: <Generic, STORAGE DEVICE, 0125> disk removable
sd2: drive offline
sd3 at scsibus1 target 0 lun 2: <Generic, STORAGE DEVICE, 0125> disk removable
sd3: drive offline
sd4 at scsibus1 target 0 lun 3: <Generic, STORAGE DEVICE, 0125> disk removable
sd4: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Meine dmesg direkt mit originalem GENERIC.MP konfiguriertem Kernel, also config GENERIC.MP, make depend, make :

NetBSD 2.0 (GENERIC.MP) #0: Sun Jan 23 19:02:18 CET 2005
 root@netsrv.homenet:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 1023 MB
avail memory = 993 MB
BIOS32 rev. 0 found at 0xfd7a0
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (                     )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 3411.29 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 32 page colors
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 648 Host Bridge (rev. 0x51)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System product 0x0003 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0342 (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System product 0x0964 (rev. 0x36)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6648 IDE controller (rev. 0x01)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at siside0 channel 1
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at ioapic0 pin 20 (irq 9)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at ioapic0 pin 21 (irq 11)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci2: interrupting at ioapic0 pin 22 (irq 10)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: interrupting at ioapic0 pin 23 (irq 9)
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Silicon Integra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 5 function 0
pciide0: Silicon Integrated System product 0x0180 (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 17 (irq 9) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus3 at pciide0 channel 1
Lucent Technologies FW322/323 IEEE 1394 OHCI Controller (Firewire serial bus, interface 0x10, revision 0x61) at pci0 dev 8 function 0 not configured
emuxki0 at pci0 dev 14 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x0a)
emuxki0: interrupting at ioapic0 pin 19 (irq 5)
emuxki0: ac97: SigmaTel unknown (0x83847658) codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id bc7<AC97_23,AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at emuxki0: full duplex, mmap, independent
joy0 at pci0 dev 14 function 1: Creative Labs PCI Gameport Joystick (rev 0x0a)
joy0: joystick connected
rtk0 at pci0 dev 16 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at ioapic0 pin 16 (irq 11)
rtk0: Ethernet address 00:00:1c:d5:03:f1
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 20 function 0
bktr0: interrupting at ioapic0 pin 18 (irq 11)
bktr0: TerraTVplus, Temic NTSC tuner.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x11) at pci0 dev 20 function 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <SAMSUNG SP1604N>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <SAMSUNG SP1604N>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1(siside0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8163B, , 0F21> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <_NEC DVD_RW ND-2500A, , 1.07> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(siside0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
ulpt0 at uhub1 port 1 configuration 1 interface 0
ulpt0: HP Deskjet 6500, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uscanner0 at uhub2 port 1
uscanner0: Canon CanoScan, rev 1.10/1.00, addr 2
umass0 at uhub3 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
ehci_idone: need toggle update status=80018d40 nstatus=80008c80
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <HDS72251, 6VLAT80, 0\0000> disk fixed
sd0: 153 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
umass1 at uhub3 port 7 configuration 1 interface 0
umass1: Genesys Logic Flash Reader, rev 2.00/1.25, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 4 luns per target
sd1 at scsibus1 target 0 lun 0: <Generic, STORAGE DEVICE, 0125> disk removable
sd1: drive offline
sd2 at scsibus1 target 0 lun 1: <Generic, STORAGE DEVICE, 0125> disk removable
sd2: drive offline
sd3 at scsibus1 target 0 lun 2: <Generic, STORAGE DEVICE, 0125> disk removable
sd3: drive offline
sd4 at scsibus1 target 0 lun 3: <Generic, STORAGE DEVICE, 0125> disk removable
sd4: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass1:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass1:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd4(umass1:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Der GNERIC.MP erkennt ja nur einen Prozessor, ist ja noch schlimmer.

Idee ?

 

[*Sheep]

...und die beiden Konfigurationsdateien saugen wir uns aus den Fingern, hää? Du weißt sicher welche Optionen Du gesetzt hast wir nicht!

 

[kraekers]

OK, vergessen wir mal die GENERIC.MP, weil mit der wird nicht einmal der 2. Prozessor (CPU1) angezeigt.

Hier meine Kernel-Config-Datei :

# $NetBSD: GENERIC,v 1.595.2.11 2004/08/30 09:52:37 tron Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include 	"arch/i386/conf/std.i386"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident 		"GENERIC-$Revision: 1.595.2.11 $"

maxusers	32		# estimated number of users

# Multiprozessorsupport
options         MULTIPROZESSOR
options         COM_MPLOCK
options         APM_NO_IDLE

# CPU support.  At least one is REQUIRED.
options 	I686_CPU

# CPU-related options.
options 	MATH_EMULATE	# floating point emulation
options 	VM86		# virtual 8086 emulation
options 	USER_LDT	# user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options 	PIC_DELAY

options 	MTRR		# memory-type range register syscall support
# doesn't work with MP just yet..
#options 	PERFCTRS	# performance-monitoring counters support

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options 	CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options 	CONS_OVERRIDE	# Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options 	REALBASEMEM=639		# size of base memory (in KB)
#options 	REALEXTMEM=15360	# size of extended memory (in KB)

# Standard system options

options 	INSECURE	# disable kernel security levels - X needs this

options 	RTC_OFFSET=-60	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop
#options 	NO_TSC_TIME	# Don't use TSC microtime, even if available.
				# Improves time behavior under VMware.

options 	KTRACE		# system call tracing via ktrace(1)
options 	SYSTRACE	# system call vetting via systrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=2048	# 2048 pages is the default
options 	P1003_1B_SEMAPHORE	# p1003.1b semaphore support

options 	LKM		# loadable kernel modules

options 	USERCONF	# userconf(4) support
#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Beep when it is safe to power down the system (requires sysbeep)
#options 	BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options 	BEEP_ONHALT_COUNT=3	# Times to beep
#options 	BEEP_ONHALT_PITCH=1500	# Default frequency (in Hz)
#options 	BEEP_ONHALT_PERIOD=250	# Default duration (in msecs)

# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Likely stable but not yet the default.
#options 	NEW_BUFQ_STRATEGY

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# expensive kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
options 	DDB		# in-kernel debugger
#options 	DDB_ONPANIC=1	# see also sysctl(8): `ddb.onpanic'
options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
#options 	KGDB		# remote debugger
#options 	KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_NOMID	# NetBSD 0.8, 386BSD, and BSDI
options 	COMPAT_09	# NetBSD 0.9
options 	COMPAT_10	# NetBSD 1.0
options 	COMPAT_11	# NetBSD 1.1
options 	COMPAT_12	# NetBSD 1.2, 386BSD, and BSDI
options 	COMPAT_13	# NetBSD 1.3, 386BSD, and BSDI
options 	COMPAT_14	# NetBSD 1.4
options 	COMPAT_15	# NetBSD 1.5
options 	COMPAT_16	# NetBSD 1.6
options 	COMPAT_43	# 4.3BSD, 386BSD, and BSDI
options 	COMPAT_386BSD_MBRPART # recognize old partition ID
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

options 	COMPAT_OSSAUDIO	# OSS (Voxware) audio driver compatibility
options 	COMPAT_SVR4	# binary compatibility with SVR4
options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
options 	COMPAT_LINUX	# binary compatibility with Linux
options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD
#options 	COMPAT_MACH	# binary compatibility with Mach binaries
#options 	COMPAT_DARWIN	# binary compatibility with Darwin binaries
#options 	EXEC_MACHO	# exec MACH-O binaries
options 	COMPAT_PECOFF	# kernel support to run Win32 apps

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
#file-system 	NFS		# Network File System client
#file-system 	NTFS		# Windows/NT file system (experimental)
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
#file-system 	UNION		# union file system
file-system	CODA		# Coda File System; also needs vcoda (below)
file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
options 	SOFTDEP		# FFS soft updates support.
#options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options 	ACPIVERBOSE	# verbose ACPI device autoconfig messages
options 	EISAVERBOSE	# verbose EISA device autoconfig messages
options 	MIIVERBOSE	# verbose PHY autoconfig messages
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
options 	USBVERBOSE	# verbose USB device autoconfig messages
#options 	PNPBIOSVERBOSE	# verbose PnP BIOS messages
#options 	PNPBIOSDEBUG	# more fulsome PnP BIOS debugging messages
options 	I2OVERBOSE	# verbose I2O driver messages
options 	MCAVERBOSE	# verbose MCA device autoconfig messages

options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options 	VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options 	VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
#options 	WSDISPLAY_CHARFUNCS		# mouse console support
# console scrolling support.
#options	WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on console
#options 	VGA_RASTERCONSOLE

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0 at root

cpu* at mainbus?
ioapic* at mainbus?

# Doesn't do anything yet.
#p64h2apic* at pci? dev? function?	# P64H2 IOxAPIC

#apm0	at mainbus0			# Advanced power management

# Tuning for power management, see apm(4) for more details.
#options 	APM_NO_IDLE		# Don't call BIOS CPU idle function
#options 	APM_V10_ONLY		# Use only the APM 1.0 calls
#options 	APM_NO_POWEROFF		# Don't power off on halt(8)
#options 	APM_POWER_PRINT		# Print stats on the console
#options 	APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

# Advanced Control and Power Interface

# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
options 	MPBIOS		# configure CPUs and APICs using MPBIOS
options 	MPBIOS_SCANPCI	# find PCI roots using MPBIOS
options 	MPACPI		# configure CPUs and APICs using ACPI
				# (acpi at mainbus must also be enabled)
options 	MPACPI_SCANPCI	# find PCI roots using MPACPI

acpi0 		at mainbus0
options 	ACPI_PCI_FIXUP		# PCI interrupt routing via ACPI
options 	ACPI_ACTIVATE_DEV	# If set, activate inactive devices
options 	ACPICA_PEDANTIC		# force strict conformance to the Spec.
options	ACPI_DISABLE_ON_POWEROFF	# disable acpi on power off

# ACPI devices
acpiacad* 	at acpi?		# ACPI AC Adapter
acpibat* 	at acpi?		# ACPI Battery
acpibut* 	at acpi?		# ACPI Button
acpiec* 	at acpi?		# ACPI Embedded Controller
acpilid* 	at acpi?		# ACPI Lid Switch
acpitz* 	at acpi?		# ACPI Thermal Zone

# Mainboard devices
#com* 		at acpi?		# Serial communications interface
#fdc* 		at acpi?		# Floppy disk controller
#lpt* 		at acpi?		# Parallel port
#npx*		at acpi?		# Math coprocessor
#pckbc*  	at acpi?		# PC keyboard controller
#wss* 		at acpi?		# NeoMagic 256AV in wss mode

# Sony Vaio jog dial
#spic* 		at acpi?		# Sony Programmable I/O Controller
#wsmouse* 	at spic?

# Toshiba Libretto devices
#vald* at acpi?

# Plug-and-Play BIOS and attached devices

pnpbios*	at mainbus?

# mainboard audio chips
#ess*		at pnpbios? index ?	# ESS AudioDrive
#sb*		at pnpbios? index ?	# NeoMagic 256AV in sb mode
#wss*		at pnpbios? index ?	# NeoMagic 256AV in wss mode
#ym*		at pnpbios? index ?	# OPL3-SA3

# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0.  A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com*		at pnpbios? index ?	# serial ports

# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt*		at pnpbios? index ?	# parallel ports

#pckbc*		at pnpbios? index ?	# PC keyboard/mouse controller
#fdc*		at pnpbios? index ?	# floppy controller

# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* 	at pnpbios? index ?

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

# Configure PCI using BIOS information
#options 	PCIBIOS			# PCI BIOS support
#options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
#options 	PCIBIOS_ADDR_FIXUP	# fixup PCI I/O addresses
#options 	PCIBIOS_BUS_FIXUP	# fixup PCI bus numbering
#options 	PCIBIOS_INTR_FIXUP	# fixup PCI interrupt routing
#options 	PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options 	PCIBIOS_INTR_GUESS	# see pcibios(4)
#options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup

# System Controllers
#elansc* at pci? dev ? function ?	# AMD Elan SC520 System Controller

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pceb*	at pci? dev ? function ?	# PCI-EISA bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
#ichlpcib* at pci? dev ? function ?	# Intel ICH PCI-ISA w/ watchdog support
pcmb*	at pci? dev ? function ?	# PCI-MCA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

agp* 	at pchb?


# EISA bus support
eisa0	at mainbus?
eisa0	at pceb?

# ISA bus support
isa0	at mainbus?
isa0	at pceb?
isa0	at pcib?
#isa0	at ichlpcib?

# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
pcmcia* at tcic? controller ? socket ?

# MCA bus support
#mca0	at mainbus?

# ISA PCMCIA controllers
pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1	at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
pcic2	at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
tcic0	at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

# PCI PCMCIA controllers
#pcic0	at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0 at isa?

# ISA Plug-and-Play PCMCIA controllers
#pcic*	at isapnp?

# CardBus bridge support
cbb*		at pci? dev ? function ?
cardslot*	at cbb?

# CardBus bus support
cardbus*	at cardslot?
pcmcia* 	at cardslot?

# Coprocessor Support

# Math Coprocessor support
npx0	at isa? port 0xf0 irq 13	# x86 math coprocessor


# Console Devices

# ISA console
#pc0	at isa? port 0x60 irq 1		# pccons generic PC console driver
# Keyboard layout configuration for pccons
#options 	FRENCH_KBD
#options 	FINNISH_KBD
#options 	GERMAN_KBD
#options 	NORWEGIAN_KBD
# pccons-specific options:
#options 	XSERVER_DDB	# PF12 gets you into DDB when X is running
#options 	XSERVER		# X server support


# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
#options 	PMS_DISABLE_POWERHOOK	# Disable PS/2 reset on resume
#vga0		at isa?
vga*		at pci? dev ? function ?
pcdisplay0	at isa?			# CGA, MDA, EGA, HGA
#machfb* 	at pci? dev ? function ? # ATI Mach64 framebuffer driver
wsdisplay*	at vga? console ?
wsdisplay*	at pcdisplay? console ?
#wsdisplay* 	at machfb? console ?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0

pcppi0		at isa?
sysbeep0	at pcppi?

# Serial Devices

# PCI serial interfaces
com*	at puc? port ?			# 16x50s on "universal" comm boards
cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards
cz*	at pci? dev ? function ?	# Cyclades-Z multi-port serial boards

# ISA Plug-and-Play serial interfaces
com*	at isapnp?			# Modems and serial boards

# PCMCIA serial interfaces
#com*	at pcmcia? function ?		# Modems and serial cards

#pcmcom* at pcmcia? function ?		# PCMCIA multi-port serial cards
#com*	at pcmcom? slave ?		# ...and the slave devices

# CardBus serial interfaces
#com*	at cardbus? dev ? function ?	# Modems and serial cards

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
com1	at isa? port 0x2f8 irq 3
com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9
#ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
#com*	at ast? slave ?
#boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
#boca0	at isa? port 0x100 irq 5	# BOCA 16-port serial cards (BB2016)
#boca1	at isa? port 0x140 irq 5	# this line is also needed for BB2016
#com*	at boca? slave ?
#tcom0	at isa? port 0x100 irq 7	# TC-800 8-port serial cards
#com*	at tcom? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?
#cy0	at isa? iomem 0xd4000 irq 12	# Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5	# Addonics FlexPort 8S
#com*	at addcom? slave ?
#moxa0	at isa?	port 0x100 irq 5	# MOXA C168H serial card (experimental)
#com*	at moxa? slave ?

# MCA serial interfaces
#com*	at mca? slot ?			# 16x50s on comm boards

# Parallel Printer Interfaces

# PCI parallel printer interfaces
#lpt*	at puc? port ?			# || ports on "universal" comm boards

# ISA parallel printer interfaces
#lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
#lpt1	at isa? port 0x278
#lpt2	at isa? port 0x3bc

# Hardware monitors

# LM7[89] and compatible hardware monitors
#lm0	at isa?	port 0x290		# other common ports: 0x280, 0x310

# VIA VT82C686A hardware monitor
#viapm*	at pci? dev ? function ?
#viaenv* at viapm?


# I2O devices
#iop*	at pci? dev ? function ?	# I/O processor
#iopsp*	at iop? tid ?			# SCSI/FC-AL ports
#ld*	at iop? tid ?			# block devices
#dpti*	at iop? tid 0			# DPT/Adaptec control interface


# SCSI Controllers and Devices

# PCI SCSI controllers
#adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
#ahd*	at pci? dev ? function ?	# Adaptec 29320, 39320 (aic790x) SCSI
#bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI
#dpt*	at pci? dev ? function ?	# DPT SmartCache/SmartRAID
#iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
#isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
#mly*	at pci? dev ? function ?	# Mylex AcceleRAID and eXtremeRAID
#mpt*	at pci? dev ? function ?	# LSI Fusion SCSI/FC
#njs*	at pci? dev ? function ?	# Workbit NinjaSCSI-32
#pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
#siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI
#esiop*	at pci? dev ? function ?	# Symbios 53c875 SCSI and newer
#options 	SIOP_SYMLED		# drive the act. LED in software
#trm*	at pci? dev ? function ?	# Tekram DC-395U/UW/F, DC-315/U SCSI

# EISA SCSI controllers
#ahb*	at eisa? slot ?			# Adaptec 174[02] SCSI
#ahc*	at eisa? slot ?			# Adaptec 274x, aic7770 SCSI
#bha*	at eisa? slot ?			# BusLogic 7xx SCSI
#dpt*	at eisa? slot ?			# DPT EATA SCSI
#uha*	at eisa? slot ?			# UltraStor 24f SCSI

# PCMCIA SCSI controllers
#aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
#esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

# ISA Plug-and-Play SCSI controllers
#aha*	at isapnp? 			# Adaptec AHA-154[02
#aic*	at isapnp?			# Adaptec AHA-1520B

# ISA SCSI controllers
#adv0	at isa? port ? irq ? drq ?	# AdvanSys APB-514[02] SCSI
#aha0	at isa? port 0x330 irq ? drq ?	# Adaptec 154[02] SCSI
#aha1	at isa? port 0x334 irq ? drq ?
#ahc0	at isa? port ? irq ?		# Adaptec 284x SCSI
#aic0	at isa? port 0x340 irq 11	# Adaptec 152[02] SCSI
#bha0	at isa? port 0x330 irq ? drq ?	# BusLogic [457]4X SCSI
#bha1	at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0	at isa? port 0x170 irq ? drq ?	# DPT SmartCache/SmartRAID
#nca0	at isa? port 0x360 irq 15	# Port-mapped NCR 53C80 controller
#nca1	at isa? iomem 0xd8000 irq 5	# Memory-mapped controller (T128, etc.)
#sea0	at isa? iomem 0xc8000 irq 5	# Seagate/Future Domain SCSI
#uha0	at isa? port 0x330 irq ? drq ?	# UltraStor [13]4f SCSI
#uha1	at isa? port 0x340 irq ? drq ?
#wds0	at isa? port 0x350 irq 15 drq 6	# WD7000 and TMC-7000 controllers
#wds1	at isa? port 0x358 irq 11 drq 5

# CardBus SCSI cards
#adv*	at cardbus? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480
#njs*	at cardbus? dev ? function ?	# Workbit NinjaSCSI-32

# MCA SCSI cards
#aha*	at mca? slot ?			# Adaptec AHA-1640

# SCSI bus support
scsibus* at scsi?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI autochangers
#ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
#ss*	at scsibus? target ? lun ?	# SCSI scanners
uk*	at scsibus? target ? lun ?	# SCSI unknown


# RAID controllers and devices
#aac*	at pci? dev ? function ?	# Adaptec AAC family
#amr*	at pci? dev ? function ?	# AMI/LSI Logic MegaRAID
#cac*	at eisa? slot ?			# Compaq EISA array controllers
#cac*	at pci? dev ? function ?	# Compaq PCI array controllers
#icp*	at pci? dev ? function ?	# ICP-Vortex GDT & Intel RAID
#mlx*	at pci? dev ? function ?	# Mylex DAC960 & DEC SWXCR family
#mlx*	at eisa? slot ?			# Mylex DAC960 & DEC SWXCR family
#twe*	at pci? dev ? function ?	# 3ware Escalade RAID controllers

#ld*	at aac? unit ?			# logical disk devices
#ld*	at amr? unit ?
#ld*	at cac? unit ?
#ld*	at icp? unit ?
#ld*	at twe? unit ?
#ld*	at mlx? unit ?

#icpsp*	at icp? unit ?			# SCSI pass-through

# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* 	at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
#acardide*	at pci? dev ? function ?	# Acard IDE controllers
#aceride* 	at pci? dev ? function ?	# Acer Lab IDE controllers
artsata* 	at pci? dev ? function ?	# Intel i31244 SATA controller
#cmdide* 	at pci? dev ? function ?	# CMD tech IDE controllers
#cypide* 	at pci? dev ? function ?	# Cypress IDE controllers
#geodeide* 	at pci? dev ? function ?	# AMD Geode IDE controllers
#hptide* 	at pci? dev ? function ?	# Triones/HighPoint IDE controllers
#optiide* 	at pci? dev ? function ?	# Opti IDE controllers
piixide* 	at pci? dev ? function ?	# Intel IDE controllers
#pdcide* 	at pci? dev ? function ?	# Promise IDE controllers
#rccide* 	at pci? dev ? function ?	# ServerWorks IDE controllers
satalink*	at pci? dev ? function ?	# SiI SATALink controllers
siside* 	at pci? dev ? function ?	# SiS IDE controllers
#slide*  	at pci? dev ? function ?	# Symphony Labs IDE controllers
#stpcide*	at pci? dev ? function ?	# STMicro STPC IDE controllers
#viaide* 	at pci? dev ? function ?	# VIA/AMD/Nvidia IDE controllers

# ISA Plug-and-Play IDE controllers
#wdc*	at isapnp?

# PCMCIA IDE controllers
#wdc*	at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#wdc0	at isa? port 0x1f0 irq 14 flags 0x00
#wdc1	at isa? port 0x170 irq 15 flags 0x00

# ATA (IDE) bus support
atabus* at ata?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at atabus? drive ? flags 0x0000

# ATA RAID configuration support, as found on some Promise controllers.
pseudo-device	ataraid
ld*	at ataraid? vendtype ? unit ?

# ATAPI bus support
atapibus* at atapi?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
#st*	at atapibus? drive ? flags 0x0000	# ATAPI tape drives
uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?			# the drives themselves
# some machines need you to do this instead of fd*
#fd0	at fdc0 drive 0

# ISA CD-ROM devices
#mcd0	at isa? port 0x300 irq 10	# Mitsumi CD-ROM drives

# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0	at isa? port 0x308 irq 5 drq 1	# Archive and Wangtek QIC tape drives

# MCA ESDI devices
#edc*	at mca? slot ?			# IBM ESDI Disk Controllers
#ed*	at edc?


# Network Interfaces

# PCI network interfaces
#an*	at pci? dev ? function ?	# Aironet PC4500/PC4800 (802.11)
#ath*	at pci? dev ? function ?	# Atheros 5210/5211/5212 802.11
#atw*	at pci? dev ? function ?	# ADMtek ADM8211 (802.11)
#bce* 	at pci? dev ? function ?	# Broadcom 4401 10/100 Ethernet
#bge* 	at pci? dev ? function ?	# Broadcom 570x gigabit Ethernet
#en*	at pci? dev ? function ?	# ENI/Adaptec ATM
ep*	at pci? dev ? function ?	# 3Com 3c59x
#epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
#esh*	at pci? dev ? function ?	# Essential HIPPI card
ex*	at pci? dev ? function ?	# 3Com 90x[BC]
#fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI
fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
#gsip*	at pci? dev ? function ?	# NS83820 Gigabit Ethernet
#hme*	at pci? dev ? function ?	# Sun Microelectronics STP2002-STQ
#le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
#lmc*	at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
#mtd*	at pci? dev ? function ?	# Myson MTD803 3-in-1 Ethernet
ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
#ntwoc*	at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial
#pcn*	at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
re*	at pci? dev ? function ?	# Realtek 8139C+/8169/8169S/8110S
rtk*	at pci? dev ? function ?	# Realtek 8129/8139
#sf*	at pci? dev ? function ?	# Adaptec AIC-6915 Ethernet
sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
#skc*	at pci? dev ? function ?	# SysKonnect SK9821 Gigabit Ethernet
#sk*	at skc?				# SysKonnect SK9821 Gigabit Ethernet
#ste*	at pci? dev ? function ?	# Sundance ST-201 Ethernet
#stge*	at pci? dev ? function ?	# Sundance/Tamarack TC9021 Gigabit
#ti*	at pci? dev ? function ?	# Alteon ACEnic gigabit Ethernet
#tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
#tlp*	at pci? dev ? function ?	# DECchip 21x4x and clones
#vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet
wi*	at pci? dev ? function ?	# Intersil Prism Mini-PCI (802.11b)
#wm*	at pci? dev ? function ?	# Intel 8254x gigabit

# EISA network interfaces
#ep*	at eisa? slot ?			# 3Com 3c579 Ethernet
#fea*	at eisa? slot ?			# DEC DEFEA FDDI
#tlp*	at eisa? slot ?			# DEC DE-425 Ethernet

# ISA Plug-and-Play network interfaces
#an*	at isapnp?			# Aironet 802.11
#ep*	at isapnp?			# 3Com 3c509 Ethernet
#fmv*	at isapnp?			# Fujitsu FMV-183
#le*	at isapnp?			# AMD PCnet-ISA Ethernet
#ne*	at isapnp?			# NE2000-compatible Ethernet
#tr*	at isapnp?			# IBM/3COM TROPIC Token-Ring

# PCMCIA network interfaces
#an*	at pcmcia? function ?		# Aironet PC4500/PC4800 (802.11)
#awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
#cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
##ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
#mbe*	at pcmcia? function ?		# MB8696x based Ethernet
#ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
#ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
#sm*	at pcmcia? function ?		# Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr*	at pcmcia? function ?		# TROPIC based Token-Ring
wi*	at pcmcia? function ?		# Lucent/Intersil WaveLan IEEE (802.11)
#xi*	at pcmcia? function ?		# Xircom CreditCard Ethernet

#mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
#com*	at mhzc?
#sm*	at mhzc?

# ISA network interfaces
#ate0	at isa? port 0x2a0 irq ?		# AT1700
#cs0	at isa? port 0x300 iomem ? irq ? drq ?	# CS8900 Ethernet
#ec0	at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
#eg0	at isa? port 0x280 irq 9		# 3C505 ethernet cards
#el0	at isa? port 0x300 irq 9		# 3C501 ethernet cards
#ep*	at isa? port ? irq ?			# 3C509 ethernet cards
#ef0	at isa? port 0x360 iomem 0xd0000 irq 7	# 3C507
#ai0	at isa? port 0x360 iomem 0xd0000 irq 7	# StarLAN
#fmv0	at isa? port 0x2a0 irq ?		# FMV-181/182
#ix0	at isa? port 0x300 irq 10		# EtherExpress/16
#iy0	at isa? port 0x360 irq ?		# EtherExpress PRO 10 ISA
#lc0	at isa? port 0x320 iomem ? irq ?	# DEC EtherWORKS III (LEMAC)
#depca0	at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5	# DEPCA
#le*	at depca?
#nele0	at isa? port 0x320 irq 9 drq 7		# NE2100
#le*	at nele?
#ntwoc0	at isa? port 0x300 irq 5 iomem 0xc8000 flags 1	# Riscom/N2 sync serial
#bicc0	at isa? port 0x320 irq 10 drq 7		# BICC IsoLan
#le*	at bicc?
#ne0	at isa? port 0x280 irq 9		# NE[12]000 ethernet cards
#ne1	at isa? port 0x300 irq 10
#sm0	at isa? port 0x300 irq 10		# SMC91C9x Ethernet
#tr0	at isa? port 0xa20 iomem 0xd8000 irq ?	# IBM TROPIC based Token-Ring
#tr1	at isa? port 0xa24 iomem 0xd0000 irq ?	# IBM TROPIC based Token-Ring
#tr*	at isa? port ? irq ?			# 3COM TROPIC based Token-Ring
#we0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
#we1	at isa? port 0x300 iomem 0xcc000 irq 10

# CardBus network cards
#ath*	at cardbus? dev ? function ?	# Atheros 5210/5211/5212 802.11
#atw*	at cardbus? dev ? function ?	# ADMtek ADM8211 (802.11)
#ex*	at cardbus? dev ? function ?	# 3Com 3C575TX
#fxp*	at cardbus? dev ? function ?	# Intel i8255x
#rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139
#tlp*	at cardbus? dev ? function ?	# DECchip 21143

# MCA network cards
#elmc*	at mca? slot ?			# 3Com EtherLink/MC (3c523)
#ep*	at mca? slot ?			# 3Com EtherLink III (3c529)
#we*	at mca? slot ?			# WD/SMC Ethernet
#ate*	at mca? slot ?			# Allied Telesis AT1720
#ne*	at mca? slot ?			# Novell NE/2 and clones
#tr*	at mca? slot ?			# IBM Token Ring adapter
#le*	at mca? slot ?			# SKNET Personal/MC2+

# MII/PHY support
#acphy*	at mii? phy ?			# Altima AC101 and AMD Am79c874 PHYs
#amhphy* at mii? phy ?			# AMD 79c901 Ethernet PHYs
#bmtphy* at mii? phy ?			# Broadcom BCM5201 and BCM5202 PHYs
#brgphy* at mii? phy ?			# Broadcom BCM5400-family PHYs
#dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
#exphy*	at mii? phy ?			# 3Com internal PHYs
#gentbi* at mii? phy ?			# Generic Ten-Bit 1000BASE-[CLS]X PHYs
#glxtphy* at mii? phy ?			# Level One LXT-1000 PHYs
#gphyter* at mii? phy ?			# NS83861 Gig-E PHY
#icsphy* at mii? phy ?			# Integrated Circuit Systems ICS189x
#igphy*	at mii? phy ?			# Intel IGP01E1000
#inphy*	at mii? phy ?			# Intel 82555 PHYs
#iophy*	at mii? phy ?			# Intel 82553 PHYs
#lxtphy* at mii? phy ?			# Level One LXT-970 PHYs
#makphy* at mii? phy ?			# Marvell Semiconductor 88E1000 PHYs
#nsphy*	at mii? phy ?			# NS83840 PHYs
#nsphyter* at mii? phy ? 		# NS83843 PHYs
#pnaphy* at mii? phy ?			# generic HomePNA PHYs
#qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
#sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
#tlphy*	at mii? phy ?			# ThunderLAN PHYs
#tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
#ukphy*	at mii? phy ?			# generic unknown PHYs
#urlphy* at mii? phy ?			# Realtek RTL8150L internal PHYs


# USB Controller and Devices

# PCI USB controllers
ehci*	at pci?	dev ? function ?	# Enhanced Host Controller
ohci*	at pci?	dev ? function ?	# Open Host Controller
uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)

# CardBus USB controllers
#ehci*	at cardbus? dev ? function ?	# Enhanced Host Controller
#ohci*	at cardbus? dev ? function ?	# Open Host Controller

# ISA USB controllers
#slhci0	at isa? port 0x300 irq 5	# ScanLogic SL811HS

# USB bus support
usb*	at ehci?
usb*	at ohci?
usb*	at uhci?
#usb*	at slhci?

# USB Hubs
uhub*	at usb?
uhub*	at uhub? port ? configuration ? interface ?

# USB HID device
uhidev*	at uhub? port ? configuration ? interface ?

# USB Mice
ums*	at uhidev? reportid ?
wsmouse* at ums? mux 0

# USB Keyboards
ukbd*	at uhidev? reportid ?
wskbd*	at ukbd? console ? mux 1

# USB Generic HID devices
uhid*	at uhidev? reportid ?

# USB Printer
ulpt*	at uhub? port ? configuration ? interface ?

# USB Modem
#umodem*	at uhub? port ? configuration ?
#ucom*	at umodem?

# USB Mass Storage
umass*	at uhub? port ? configuration ? interface ?
wd* at umass?

# USB audio
#uaudio*	at uhub? port ? configuration ?

# USB MIDI
#umidi* at uhub? port ? configuration ?

# USB IrDA
# USB-IrDA bridge spec
#uirda* at uhub? port ? configuration ? interface ?
#irframe* at uirda?

# SigmaTel STIr4200 USB/IrDA Bridge
#ustir* at uhub? port ?
#irframe* at ustir?

# USB Ethernet adapters
#aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
#cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
#kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters
#uax*	at uhub? port ?		# ASIX AX88172 based adapters
#udav*	at uhub? port ?		# Davicom DM9601 based adapters
#url*	at uhub? port ?		# Realtek RTL8150L based adapters

# Prolific PL2301/PL2302 host-to-host adapter
#upl*	at uhub? port ?

# Serial adapters
#ubsa*	at uhub? port ?		# Belkin serial adapter
#ucom*	at ubsa? portno ?

#uftdi*	at uhub? port ?		# FTDI FT8U100AX serial adapter
#ucom*	at uftdi? portno ?

#umct*	at uhub? port ?		# MCT USB-RS232 serial adapter
#ucom*	at umct? portno ?

#uplcom* at uhub? port ? 	# I/O DATA USB-RSAQ2 serial adapter
#ucom*	at uplcom? portno ?

#uvscom* at uhub? port ? 	# SUNTAC Slipper U VS-10U serial adapter
#ucom*	at uvscom? portno ?

# Diamond Multimedia Rio 500
#urio*	at uhub? port ?

# USB Handspring Visor
#uvisor*	at uhub? port ?
#ucom*	at uvisor?

# USB scanners
uscanner* at uhub? port ?

# USB scanners that use SCSI emulation, e.g., HP5300
#usscanner* at uhub? port ?

# Y@P firmware loader
#uyap* at uhub? port ?

# D-Link DSB-R100 USB radio
#udsbr*	at uhub? port ?
#radio*	at udsbr?

# USB Generic driver
ugen*	at uhub? port ?


# IrDA and Consumer Ir devices

# Toshiba Oboe
#oboe* 	at pci? dev ? function ?
#irframe* at oboe?

# PCI IEEE1394 controllers
fwohci* at pci? dev ? function ?	# IEEE1394 Open Host Controller

# CardBus IEEE1394 controllers
#fwohci* at cardbus? dev ? function ?	# IEEE1394 Open Host Controller

fw*	at fwbus?			# IP over 1394

# IEEE1394 nodes
fwnode* at fwbus? idhi ? idlo ?
sbpscsi* at fwnode?
scsibus* at sbpscsi?

# Audio Devices

# PCI audio devices
auich*	at pci? dev ? function ?	# Intel ICH integrated AC'97 Audio
#autri*	at pci? dev ? function ?	# Trident 4DWAVE based AC'97 Audio
#auvia*	at pci? dev ? function ?	# VIA VT82C686A integrated AC'97 Audio
clcs*	at pci? dev ? function ?	# Cirrus Logic CS4280
clct*	at pci? dev ? function ?	# Cirrus Logic CS4281
cmpci*	at pci? dev ? function ?	# C-Media CMI8338/8738
eap*	at pci? dev ? function ?	# Ensoniq AudioPCI
emuxki* at pci? dev ? function ?	# Creative SBLive! and PCI512
#esa*	at pci? dev ? function ?	# ESS Allegro-1 / Maestro-3 PCI Audio
#esm*	at pci? dev ? function ?	# ESS Maestro-1/2/2e PCI Audio Accelerator
eso*	at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
#fms*	at pci? dev ? function ?	# Forte Media FM801
#neo*	at pci? dev ? function ?	# NeoMagic 256 AC'97 Audio
#sv*	at pci? dev ? function ?	# S3 SonicVibes
#yds*	at pci? dev ? function ?	# Yamaha DS-1 PCI Audio

# ISA Plug-and-Play audio devices
ess*	at isapnp?			# ESS Tech ES1887, ES1888, ES888 audio
#guspnp* at isapnp?			# Gravis Ultra Sound PnP audio
sb*	at isapnp?			# SoundBlaster-compatible audio
wss*	at isapnp?			# Windows Sound System
#ym*	at isapnp?			# Yamaha OPL3-SA3 audio

# ISA audio devices
# the "aria" probe might give false hits
#aria0	at isa? port 0x290 irq 10 		# Aria
#ess0	at isa? port 0x220 irq 5 drq 1 drq2 5	# ESS 18XX
#gus0	at isa? port 0x220 irq 7 drq 1 drq2 6	# Gravis Ultra Sound
#pas0	at isa? port 0x220 irq 7 drq 1		# ProAudio Spectrum
#pss0	at isa? port 0x220 irq 7 drq 6		# Personal Sound System
#sp0	at pss0 port 0x530 irq 10 drq 0		# 	sound port driver
sb0	at isa? port 0x220 irq 5 drq 1 drq2 5	# SoundBlaster
wss0	at isa? port 0x530 irq 10 drq 0	drq2 1	# Windows Sound System

# PCMCIA audio devices
#esl*	at pcmcia? function ?			# ESS 1688 AudioDrive

#cms0	at isa? port 0x220			# Creative Music System

# OPL[23] FM synthesizers
#opl0	at isa? port 0x388	# use only if not attached to sound card
#opl*	at cmpci? flags 1
#opl*	at esl?
#opl*	at eso?
#opl*	at ess?
#opl*	at fms?
#opl*	at sb?
#opl*	at sv?
#opl*	at wss?
#opl*	at yds?
#opl*	at ym?

# Audio support
audio*	at audiobus?

# MPU 401 UARTs
#mpu*	at isa? port 0x330 irq 9	# MPU401 or compatible card
mpu*	at cmpci?
mpu*	at eso?
#mpu*	at fms?
mpu*	at sb?
#mpu*	at yds?
#mpu*	at ym?

# MIDI support
midi*	at midibus?
midi*	at pcppi?		# MIDI interface to the PC speaker

# The spkr driver provides a simple tone interface to the built in speaker.
spkr0	at pcppi?		# PC speaker


# FM-Radio devices
# ISA radio devices
#az0	at isa? port 0x350      # Aztech/PackardBell FM Radio Card
#az1	at isa? port 0x358
#rt0	at isa? port 0x20c      # AIMS Lab Radiotrack & compatible
#rt1	at isa? port 0x284
#rt2	at isa? port 0x30c
#rt3	at isa? port 0x384
#rtii0	at isa? port 0x20c      # AIMS Lab Radiotrack II FM Radio Card
#rtii1	at isa? port 0x30c
#sf2r0	at isa? port 0x384      # SoundForte RadioLink SF16-FMR2 FM Radio Card

# PCI radio devices
#gtp*	at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card

# Radio support
#radio*	at az?
#radio*	at gtp?
#radio*	at rt?
#radio*	at rtii?
#radio*	at sf2r?


# TV cards

# Brooktree 848/849/878/879 based TV cards
bktr* at pci? dev ? function ?
radio* at bktr?


# Mice

# ISA busmice
lms0	at isa? port 0x23c irq 5	# Logitech bus mouse
lms1	at isa? port 0x238 irq 5
mms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
mms1	at isa? port 0x238 irq 5
wsmouse*	at lms? mux 0
wsmouse*	at mms? mux 0


# Cryptographic Devices

# PCI cryptographic devices
#hifn*	at pci? dev ? function ?	# Hifn 7755/7811/795x
#ubsec*	at pci? dev ? function ?	# Broadcom 5501/5601/580x/582x


# Joysticks

#joy*	at pnpbios? index ?		# Game port

# ISA Plug-and-Play joysticks
joy*	at isapnp?			# Game ports (usually on audio cards)

# PCI joysticks
joy*	at pci?				# Game ports (usually on audio cards)
joy*	at eso?				# ESS Solo-1 on-board joystick

# ISA joysticks. Probe is a little strange; add only if you have one.
joy0	at isa? port 0x201


# Miscellaneous Devices

# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1

# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#weasel* at pci?

# Pull in optional local configuration
include	"arch/i386/conf/GENERIC.local"


# Pseudo-Devices

pseudo-device 	crypto		# opencrypto framework

# disk/mass storage pseudo-devices
pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	cgd		4	# cryptographic disk devices
pseudo-device	raid		8	# RAIDframe disk driver
options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options 	RF_INCLUDE_EVENODD=1
#options 	RF_INCLUDE_RAID5_RS=1
#options 	RF_INCLUDE_PARITYLOGGING=1
#options 	RF_INCLUDE_CHAINDECLUSTER=1
#options 	RF_INCLUDE_INTERDECLUSTER=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1

# Vinum
# pseudo-device	vinum		8	# Vinum
# options 	VINUMDEBUG

pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
#pseudo-device	ppp		2	# Point-to-Point Protocol
#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
#pseudo-device	sl		2	# Serial Line IP
pseudo-device	strip		2	# Starmode Radio IP (Metricom)
pseudo-device	irframetty		# IrDA frame line discipline
pseudo-device	tun		2	# network tunneling over tty
pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	tb		1	# tablet line discipline
pseudo-device	sequencer	1	# MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)
pseudo-device	clockctl		# user control of clock subsystem

# a pseudo device needed for Coda	# also needs CODA (above)
pseudo-device	vcoda		4	# coda minicache <-> venus comm.

# a pseudo device needed for SMBFS
pseudo-device	nsmb			# experimental - SMB requester

# wscons pseudo-devices
pseudo-device	wsmux			# mouse & keyboard multiplexor
pseudo-device	wsfont
pseudo-device	ksyms			# /dev/ksyms

Bei dieser Kernel-Config-Datei wird mir halt, um es nochmals zu erwähnen, nur eine CPU angezeigt die gestartet wurde und zwar die CPU0.

Ich habe MULTIPROZESSOR und ACPI Support aktiviert.

Und mehr weiss ich nicht. Ich habe mir einen Wolf gegoogelt, jedoch nichts gefunden.

Hat jemand, oder Du "Sheep" vielleicht einen Tipp ?

Viele Grüße
Kraekers

 

[sammy2ooo]

[wage Vermutung]
kann es sein das du gar kein "richtiges" dual Processor system hast, sondern ein P4 mit HT und das aus diesem Grund die Sache mit Application Processor kommt?
[/wage Vermutung]

 

[AceX5]

Du bist nicht der einzige mit dem Problem. Siehe folgenden Post.

Die Lösung findet sich hier.

 

[CAMISOLITE]

Du bist nicht der einzige mit dem Problem. Siehe folgenden Post.

Die Lösung findet sich hier.

Das hieße ja, der Fragesteller hat die (seine eigene !) Lösung bereits. Hab' ich was verpasst ??? Muß ich den Sinn dieses Threads jetzt verstehen ???

 

[SierraX]

Der ursprungspost war vom 23.1. die Antworten vom 24. Das Sammy2000 und AceX5 auf eine beendeten Post geantwortet haben ist imho eine unachtsamkeit gewesen.

 

[AceX5]

Ja, hab irgendwie ein bisschen geschlafen.