Matrox und Xfree86

Legorado · 5 März 2004

Hallo Leute!

Ich bekomme nach startx folgende Ausgabe:

xauth: (argv):1: bad display name "basti.home.org:0" in remove comand

Meine Matrox G550 wird von X erkannt. (logdatei im Anhang)

Ich habe noch das Module mga_hal.o von hier ftp://ftp.matrox.com/pub/mga/archive/linux/2003/mgadrivers-3.0.tgz nach /usr/X11R6/lib/modules/drivers kopiert. Sollte denke ich mal richtig sein oder?

Hier meine Config:

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/bitstream-vera/"
EndSection

Section "Module"
Load "extmod"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection

Section "Monitor"
Identifier "Monitor0"
HorizSync 30-96
VertRefresh 50-160
Option "DPMS"
EndSection

Section "Device"
Identifier "Card0"
VendorName "Matrox"
BoardName "MGA G550 AGP"
Driver "mga"
# Option "AGPMode" "1"
# BusID "PCI:01:00:0"
Screen 0
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "1280x1024" "1024x768"
# ViewPort 0 0
EndSubSection
EndSection

Dies hier http://www.bsdforen.de/forums/showthread.php?s=&threadid=2427&highlight=matrox+g550 hat mir auch nicht weiter geholfen.

Vielen Dank an alle im Voraus

Mfg Sebastian

[moR-pH-euS] · 5 März 2004

bin ich der einzige bei dem der anhang der xfree86.log datei leer ist ?
schau dir mal deine /etc/hosts an und ob überhaupt eine xfree86.log datei angelegt wird unter /var/log....

Legorado · 5 März 2004

Hi

Die Datei wird definitiv erstellt.
Ich habe jetzt die /etc/hots mal angepasst und jetzt kommt nach der eingabe von startx als letzte Zeile:

Waiting the X Server to shut down

Hier jetzt die aktuelle log datei:

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.2.1 i386 [ELF]
Build Date: 21 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 5 20:02:25 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/bitstream-vera/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:06:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:07:0: chip 105a,4d68 card 105a,4d68 rev 02 class 01,80,85 hdr 00
(II) PCI: 01:08:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 01:08:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 03:00:0: chip 102b,2527 card 102b,0f84 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x0000afff (0x2000) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xea000000 - 0xebffffff (0x2000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xe7000000 - 0xe9ffffff (0x3000000) MX
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX
(--) PCI:*(3:0:0) Matrox Graphics, Inc. MGA G550 AGP rev 1, Mem @ 0xe4000000/25, 0xe7000000/14, 0xe8000000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb000000 - 0xebffffff (0x1000000) MXE
[1] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[2] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[3] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[4] -1 0 0xec000000 - 0xefffffff (0x4000000) MXE
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[6] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[7] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[8] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[9] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[10] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[11] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[13] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[14] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[15] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[16] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[17] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[18] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
(II) PCI Memory resource overlap reduced 0xeb000000 from 0xebffffff to 0xeb003fff
(II) PCI Memory resource overlap reduced 0xec000000 from 0xefffffff to 0xec000fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb000000 - 0xeb003fff (0x4000) MXE
[1] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[2] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[3] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[4] -1 0 0xec000000 - 0xec000fff (0x1000) MXE
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[6] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[7] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[8] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[9] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[10] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[11] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[13] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[14] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[15] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[16] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[17] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[18] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 - 0xeb003fff (0x4000) MXE
[6] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[7] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[8] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[9] -1 0 0xec000000 - 0xec000fff (0x1000) MXE
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[11] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[12] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[13] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX
[16] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[19] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[20] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[21] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[22] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[23] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[24] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[25] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 03:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset mgag550 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 - 0xeb003fff (0x4000) MXE
[6] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[7] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[8] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[9] -1 0 0xec000000 - 0xec000fff (0x1000) MXE
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[11] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[12] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[13] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX
[16] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[19] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[20] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[21] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[22] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[23] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[24] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[25] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 - 0xeb003fff (0x4000) MXE
[6] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[7] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[8] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[9] -1 0 0xec000000 - 0xec000fff (0x1000) MXE
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[11] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[12] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[13] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX
[19] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[20] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[21] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[23] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[24] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[25] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[26] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[27] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[28] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) MGA(0): Chipset: "mgag550"
(II) Loading sub module "mga_hal"
(II) LoadModule: "mga_hal"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_hal.o
(II) Module mga_hal: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(==) MGA(0): Matrox HAL module used
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE4000000
(--) MGA(0): MMIO registers at 0xE7000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE8000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xe7000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(==) MGA(0): Write-combining range (0xe8000000,0x800000) was already clear
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(==) MGA(0): Write-combining range (0xe7000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(==) MGA(0): Write-combining range (0xe8000000,0x800000) was already clear
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x0
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: 0x0
(II) MGA(0): end of DDC Monitor info
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) MGA(0): initializing int10
(==) MGA(0): Write-combining range (0xa0000,0x20000) was already clear
(==) MGA(0): Write-combining range (0xc0000,0x40000) was already clear
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(==) MGA(0): Write-combining range (0x0,0x1000) was already clear
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 32768 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 1.4
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: Matrox G550
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level 2
(II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) MGA(0): VESA VBE DDC read successfully
(==) MGA(0): Write-combining range (0x0,0x1000) was already clear
(II) MGA(0): VBE DDC Monitor info: 0x842d800
(II) MGA(0): Manufacturer: SAM Model: cf1 Serial#: 0
(II) MGA(0): Year: 1998 Week: 43
(II) MGA(0): EDID Version: 1.1
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) MGA(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) MGA(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30
(II) MGA(0): Gamma: 2.44
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.275 greenY: 0.605
(II) MGA(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.298
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 720x400@88Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@87Hz (interlaced)
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1280x1024@75Hz
(II) MGA(0): 1152x870@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) MGA(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) MGA(0): #5: hsize: 1024 vsize 768 refresh: 100 vid: 26721
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 113.3 MHz Image Size: 390 x 292 mm
(II) MGA(0): h_active: 1024 h_sync: 1096 h_sync_end 1208 h_blank_end 1392 h_border: 0
(II) MGA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 814 v_border: 0
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 157.5 MHz Image Size: 366 x 292 mm
(II) MGA(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 202.5 MHz Image Size: 390 x 292 mm
(II) MGA(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) MGA(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) MGA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 210 MHz
(II) MGA(0): end of VBE DDC Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) MGA(0): Monitor0: Using vrefresh range of 50.00-90.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "832x624" (hsync out of range)
(II) MGA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
(II) MGA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1152x768" (width too large for virtual size)
(==) MGA(0): Write-combining range (0xe7000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(==) MGA(0): Write-combining range (0xe8000000,0x800000) was already clear
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(--) MGA(0): Display dimensions: (400, 300) mm
(--) MGA(0): DPI set to (65, 65)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8000000 - 0xe87fffff (0x800000) MX
[1] 0 0 0xe7000000 - 0xe7003fff (0x4000) MX
[2] 0 0 0xe4000000 - 0xe5ffffff (0x2000000) MX
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[8] -1 0 0xeb000000 - 0xeb003fff (0x4000) MXE
[9] -1 0 0xeb004000 - 0xeb007fff (0x4000) MXE
[10] -1 0 0xec002000 - 0xec003fff (0x2000) MXE
[11] -1 0 0xec001000 - 0xec001fff (0x1000) MXE
[12] -1 0 0xec000000 - 0xec000fff (0x1000) MXE
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MXEO
[14] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX(B)
[15] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX(B)
[16] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX(B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX
[22] -1 0 0x0000ac00 - 0x0000acff (0x100) IXE
[23] -1 0 0x0000a800 - 0x0000a8ff (0x100) IXE
[24] -1 0 0x0000a400 - 0x0000a4ff (0x100) IXE
[25] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXE
[26] -1 0 0x00009c00 - 0x00009cff (0x100) IXE
[27] -1 0 0x00009800 - 0x000098ff (0x100) IXE
[28] -1 0 0x00009400 - 0x000094ff (0x100) IXE
[29] -1 0 0x00009000 - 0x000090ff (0x100) IXE
[30] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[31] -1 0 0x0000c400 - 0x0000c4ff (0x100) IXE
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
(==) MGA(0): Write-combining range (0xe7000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(==) MGA(0): Write-combining range (0xe8000000,0x800000) was already clear
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): Using 7424 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "Auto"
(**) Mouse0: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse

Mfg Sebastian

Ice · 5 März 2004

# BusID "PCI:01:00:0"

Ähh, muss das bei der Matrox-Karte so sein????

Gruß,

Ice

Legorado · 5 März 2004

# BusID "PCI:01:00:0"

Es geht mit und ohne nicht.

Er sucht beim start die .Xauthority, welche leer ist schreibt eine neue, benuzt diese und wenn ich wieder in der konsole wieder schreiben kann ist sie wieder leer.
Hat das evtl. was damit zu tun?

Mfg Sebastian

berg · 6 März 2004

Geht das überhaupt mit einem scheinbar für Linux gebautem Treibermodul ein FreeBSD 'X' zu betreiben?

juedan · 6 März 2004

Hallo Legorado,

die Matrox G550 ist doch eine GraKa, an die man zwei Monitor anschließen kann?
Hast Du den Monitor vielleicht am falschen Anschluß?

Grüße

Jürgen

Legorado · 6 März 2004

Guten Morgen

Geht das überhaupt mit einem scheinbar für Linux gebautem Treibermodul ein FreeBSD 'X' zu betreiben?

So wie hier http://www.freebsdforums.org/forums/showthread.php?threadid=17444&goto=nextnewest beschrieben sollte es gehn denke ich.

Hast Du den Monitor vielleicht am falschen Anschluß?

Ich hab schon beide durchprobiert.

Mfg Sebastian

berg · 6 März 2004

Original geschrieben von Legorado
So wie hier http://www.freebsdforums.org/forums/showthread.php?threadid=17444&goto=nextnewest beschrieben sollte es gehn denke ich.

Du hast also wie dort beschrieben den Treiber aus den Quellen gebaut, ja? Anders wird das wohl nichts...

MfG

Gregor · 6 März 2004

Moin,
ähm, mal 'ne doofe Frage:
Wieso überhaupt den Treiber selbst bauen?
Bei mir läuft auch 'ne G550, mit FBSD-4.8-Release und dem mitgeliefertem mga-Treiber (von XFree86) tadellos, seit 30min sogar
im Xinerama-Modus mit 3200x1200er Auflösung, bisher absolut
fehlerfrei...
oder brauchts das 3D-Gewurstel tatsächlich???
Ich hatte bisher danach jedenfalls noch kein Bedürfnis

Auf Wunsch kann ich ja mal meine Konfigurationsdatei anhängen.

-Gregor.

Legorado · 6 März 2004

Hi

Du hast also wie dort beschrieben den Treiber aus den Quellen gebaut, ja? Anders wird das wohl nichts...

ja, genau so hab ichs gemacht.

Wieso überhaupt den Treiber selbst bauen?

Er hat bei mir /usr/X11R6/lib/modules/drivers/mga_hal.o verlangt. Hab es dann nach der oben genannten Anleitung eingespielt.

@Gregor: Wäre seht nett wenn du deine XFree86Config mal mit anhängst. 3D is mir im Moment egal, bin froh wenns mal läuft.

Ach ich hatte noch gar nicht erwähnt, dass ich FreeBSD 5.2.1 nutze. :rolleyes:

Mfg Sebastian

Gregor · 6 März 2004

Moin,
also bei mir hat die XFree86-Installation nicht nach der mga-HAL
verlangt - es kommt zwar beim Start irgendwas damit, daß er auf Grund
der fehlenden mga-HAL das DRI beim zweiten Bildschirm nicht verwenden
kann, ist mir aber egal - ich lege viel Wert auf gute 2D-Darstellung,
und da bin ich bisher mit Matrox immer sehr gut gefahren

Ok, hier meine XF86Config:

Code:

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
        Screen	    1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
        Option         "Xinerama" "On"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/Office51/fonts/type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/Office51/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TrueType/"
        FontPath     "/usr/X11R6/lib/X11/fonts/webfonts/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc102"
	Option	    "XkbLayout" "de"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "Auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "Emulate3Buttons"
	Option	    "Emulate3Timeout" "50"
	Option	    "Buttons" "5"
        Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

	#DisplaySize	  380   290	# mm
	Identifier   "Monitor0"
	VendorName   "EIZ"
	ModelName    "F784-T"
	HorizSync    31.5 - 99.0
	VertRefresh  50.0 - 100.0
	Option	     "DPMS"
	ModeLine     "1600x1200" 215.85 1600 1672 2032 2176 1200 1202 1214 1240 #80Hz
EndSection

Section "Monitor"
        #DisplaySize      380   290     # mm
        Identifier   "Monitor1"
        VendorName   "EIZ"
        ModelName    "F78"
        HorizSync    31.5 - 99.0
        VertRefresh  50.0 - 100.0
        Option       "DPMS"
        ModeLine     "1600x1200" 215.85 1600 1672 2032 2176 1200 1202 1214 1240 #80Hz
EndSection


Section "Device"
	Identifier  "Card0"
	Driver      "mga"
	VendorName  "Matrox Graphics, Inc."
	BoardName   "MGA G550 AGP"
	ChipSet     "mgag550"
	BusID       "PCI:1:0:0"
        Screen      0
EndSection

Section "Device"
        Identifier  "Card1"
        Driver      "mga"
        VendorName  "Matrox Graphics, Inc."
        BoardName   "MGA G550 AGP"
        ChipSet     "mgag550"
        BusID       "PCI:1:0:0"
        Screen      1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	DefaultDepth 	 16
	Monitor    "Monitor0"
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes	 "1600x1200" "1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth     24
	EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
        DefaultDepth     16
        Monitor    "Monitor1"
        SubSection "Display"
                Depth     1
        EndSubSection
        SubSection "Display"
                Depth     4
        EndSubSection
        SubSection "Display"
                Depth     8
        EndSubSection
        SubSection "Display"
                Depth     15
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes    "1600x1200" "1280x1024" "1024x768" "800x600"
        EndSubSection
        SubSection "Display"
                Depth     24
        EndSubSection
EndSection

Anmerkung:
Ich weiß, daß der F78 etwas "unterfordert" ist mit dieser Modeline,
aber mir reichen die 80Hz, die die beiden liefern.
Den Modeline-Generator gibts ja hier:
http://koala.ilog.fr/cgi-bin/nph-colas-modelines

Aber auch hier geht der Dank an die deutschsprachige Mailingliste,
ohne die ich diese Konfiguration nie geschafft hätte - so eine
Konfiguration ist ja schließlich nicht so ganz ohne...
(Der Subject meines Postings war damals "Matrox G550, DH und
Xinerama.", vom 18.10.2003, da stehen dann ein paar mehr Tipps drinnen).

-Gregor.

Legorado · 6 März 2004

Hi

Danke für die Config, hat aber nichts gebracht. Nachdem ich startx eingebe, kommt immernoch "Waiting the X Server to shut down" ohne einen anderen Fehler auszugeben.

@Gregor: Hast du im Kernel irgendwas für die Karte mit eingebaut?

Mfg Sebastian

edit: Ich installier jetzt mal alles neu und mach dann mal /usr/ports/x11-server/XFree86-4-Server-snap drauf und schau dann mal ob ich was hinbekomme. Ich sag dann später mal bescheid...

PS: Ich weiß, is schlechte Angewohnheit von Windows her ;'(

Gregor · 6 März 2004

@Legorado:
Nee, du brauchst nicht neu zu installieren, das bring nix, denn dann
hast du das Problem ja ganz bestimmt wieder - FreeBSD ist
wirklich kein Windows, wo es manchmal hilft.
(Außer du hast das System schon so "zerkonfiguriert", dann könnte es helfen).

Im Kernel habe ich betreffend VGA nur das hier:

Code:

device		vga0	at isa?                # VGA-Karte
device		agp			       # Support für verschiedene AGP Chipsätze

und diese beiden Teile (aber die spielen keine Rolle IMHO):

Code:

options		VESA                          # Grafik für Konsole
options 	SC_PIXEL_MODE		      # Raster Text Modus

-Gregor.

Legorado · 6 März 2004

Guten Abend!

So, jetzt funtionierts mit der gleichen Config wie zuvor.
Ich glaub ich hätte nicht dem dem Modul mga_hal.o "herumpfuschen" sollen. Aber is ja jetzt auch egal.
Vielen Danke für eure Hilfe!!!

Mfg Sebastian

Matrox und Xfree86

Legorado

Well-Known Member

[moR-pH-euS]

Magnum P.I.

Legorado

Well-Known Member

Ice

Well-Known Member

Legorado

Well-Known Member

berg

sportfreund

juedan

Guest

Legorado

Well-Known Member

berg

sportfreund

Gregor

FreeBSD-SMP-Fan

Legorado

Well-Known Member

Gregor

FreeBSD-SMP-Fan

Legorado

Well-Known Member

Gregor

FreeBSD-SMP-Fan

Legorado

Well-Known Member

Wir schützen deine Privatsphäre