atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <vendor 0x0c45 USB camera, class 0/0, rev 1.10/1.01, addr 2> on uhub1
ulpt0: <HP Deskjet 5700, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
kbd2 at ukbd0
uhid1: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 76318MB <Seagate ST380815AS 4.AAB> at ata2-master SATA300
ad6: 76319MB <Seagate ST380815AS 4.AAB> at ata3-master SATA300
acd0: DVDROM <HL-DT-STDVD-ROM GDRH20N/0L02> at ata4-master SATA150
ad10: 152626MB <Maxtor 6G160E0 KA101V00> at ata5-master SATA300
GEOM_LABEL: Label for provider ad4s1 is ntfs/System Reserved.
ad12: 190781MB <SAMSUNG HD200HJ KF100-06> at ata6-master SATA150
acd1: DVDR <TSSTcorp CDDVDW SH-S223L/SB01> at ata7-master SATA150
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm1: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
hdac2: HDA Codec #0: Realtek ALC888
pcm2: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac2
pcm3: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac2
pcm4: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac2
pcm5: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac2
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label for provider ad12s1 is ntfs/Home.
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe1:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata5:0:0:0): CAM Status: SCSI Status Error
(probe1:ata5:0:0:0): SCSI Status: Check Condition
(probe1:ata5:0:0:0): NOT READY asc:3a,1
(probe1:ata5:0:0:0): Medium not present - tray closed
(probe1:ata5:0:0:0): Unretryable error
(probe0:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:0:0): CAM Status: SCSI Status Error
(probe0:ata2:0:0:0): SCSI Status: Check Condition
(probe0:ata2:0:0:0): NOT READY asc:3a,0
(probe0:ata2:0:0:0): Medium not present
(probe0:ata2:0:0:0): Unretryable error
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDRH20N 0L02> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata5 bus 0 target 0 lun 0
cd1: <TSSTcorp CDDVDW SH-S223L SB01> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad10s1a
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
rl0: link state changed to UP
module_register: module vgapci/radeon already exists!
Module vgapci/radeon failed to register: 17
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 5 5 1 1 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p3 #0: Thu Aug 20 16:35:30 CEST 2009
root@fatcat.at.home:/usr/obj/usr/src/sys/FATCAT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 6432477184 (6134 MB)
avail memory = 6187540480 (5900 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fed08000, 1000 (3) failed
acpi0: reservation of fed1c000, 4000 (3) failed
acpi0: reservation of fed20000, 20000 (3) failed
acpi0: reservation of fed50000, 40000 (3) failed
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of e0000000, 10000000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xfe7e0000-0xfe7fffff irq 16 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 16 at device 4.0 on pci2
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xc0000000-0xcfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci3
hdac0: <ATI RV770 High Definition Audio Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci3
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib4: <PCI-PCI bridge> irq 16 at device 8.0 on pci2
pci4: <PCI bus> on pcib4
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci4
hdac1: <ATI RV770 High Definition Audio Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.1 on pci4
hdac1: HDA Driver Revision: 20090329_0131
hdac1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe6ffc00-0xfe6fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
hdac2: <Intel 82801J High Definition Audio Controller> mem 0xfe6f8000-0xfe6fbfff irq 22 at device 27.0 on pci0
hdac2: HDA Driver Revision: 20090329_0131
hdac2: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib6
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfeac0000-0xfeafffff irq 17 at device 0.0 on pci5
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ale0: Ethernet address: 00:24:8c:3d:46:69
ale0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe6ff800-0xfe6ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci7
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:6b:93:ea:a6
rl0: [ITHREAD]
fwohci0: <Lucent FW322/323> mem 0xfebfe000-0xfebfefff irq 19 at device 3.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:c6:73:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:c6:73:12
fwe0: Ethernet address: 02:1e:8c:c6:73:12
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:01:c6:73:12 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbff4c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfe6fe800-0xfe6fefff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE, should be ED [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61a092006000920
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <vendor 0x0c45 USB camera, class 0/0, rev 1.10/1.01, addr 2> on uhub1
ulpt0: <HP Deskjet 5700, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
kbd2 at ukbd0
uhid1: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 76318MB <Seagate ST380815AS 4.AAB> at ata2-master SATA300
ad6: 76319MB <Seagate ST380815AS 4.AAB> at ata3-master SATA300
acd0: DVDROM <HL-DT-STDVD-ROM GDRH20N/0L02> at ata4-master SATA150
ad10: 152626MB <Maxtor 6G160E0 KA101V00> at ata5-master SATA300
GEOM_LABEL: Label for provider ad4s1 is ntfs/System Reserved.
ad12: 190781MB <SAMSUNG HD200HJ KF100-06> at ata6-master SATA150
acd1: DVDR <TSSTcorp CDDVDW SH-S223L/SB01> at ata7-master SATA150
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm1: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
hdac2: HDA Codec #0: Realtek ALC888
pcm2: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac2
pcm3: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac2
pcm4: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac2
pcm5: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac2
GEOM_LABEL: Label for provider ad12s1 is ntfs/Home.
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe1:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata5:0:0:0): CAM Status: SCSI Status Error
(probe1:ata5:0:0:0): SCSI Status: Check Condition
(probe1:ata5:0:0:0): NOT READY asc:3a,1
(probe1:ata5:0:0:0): Medium not present - tray closed
(probe1:ata5:0:0:0): Unretryable error
(probe0:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:0:0): CAM Status: SCSI Status Error
(probe0:ata2:0:0:0): SCSI Status: Check Condition
(probe0:ata2:0:0:0): NOT READY asc:3a,0
(probe0:ata2:0:0:0): Medium not present
(probe0:ata2:0:0:0): Unretryable error
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDRH20N 0L02> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata5 bus 0 target 0 lun 0
cd1: <TSSTcorp CDDVDW SH-S223L SB01> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad10s1a
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
rl0: link state changed to UP
module_register: module vgapci/radeon already exists!
Module vgapci/radeon failed to register: 17
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...7 5 4 3 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p3 #0: Thu Aug 20 16:35:30 CEST 2009
root@fatcat.at.home:/usr/obj/usr/src/sys/FATCAT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 6432477184 (6134 MB)
avail memory = 6187540480 (5900 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fed08000, 1000 (3) failed
acpi0: reservation of fed1c000, 4000 (3) failed
acpi0: reservation of fed20000, 20000 (3) failed
acpi0: reservation of fed50000, 40000 (3) failed
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of e0000000, 10000000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xfe7e0000-0xfe7fffff irq 16 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 16 at device 4.0 on pci2
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xc0000000-0xcfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci3
hdac0: <ATI RV770 High Definition Audio Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci3
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib4: <PCI-PCI bridge> irq 16 at device 8.0 on pci2
pci4: <PCI bus> on pcib4
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci4
hdac1: <ATI RV770 High Definition Audio Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.1 on pci4
hdac1: HDA Driver Revision: 20090329_0131
hdac1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe6ffc00-0xfe6fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
hdac2: <Intel 82801J High Definition Audio Controller> mem 0xfe6f8000-0xfe6fbfff irq 22 at device 27.0 on pci0
hdac2: HDA Driver Revision: 20090329_0131
hdac2: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib6
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfeac0000-0xfeafffff irq 17 at device 0.0 on pci5
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ale0: Ethernet address: 00:24:8c:3d:46:69
ale0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe6ff800-0xfe6ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci7
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:6b:93:ea:a6
rl0: [ITHREAD]
fwohci0: <Lucent FW322/323> mem 0xfebfe000-0xfebfefff irq 19 at device 3.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:c6:73:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:c6:73:12
fwe0: Ethernet address: 02:1e:8c:c6:73:12
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:01:c6:73:12 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbff4c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfe6fe800-0xfe6fefff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE, should be ED [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61a092006000920
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ulpt0: <HP Deskjet 5700, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
kbd2 at ukbd0
uhid1: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 76318MB <Seagate ST380815AS 4.AAB> at ata2-master SATA300
ad6: 76319MB <Seagate ST380815AS 4.AAB> at ata3-master SATA300
acd0: DVDROM <HL-DT-STDVD-ROM GDRH20N/0L02> at ata4-master SATA150
ad10: 152626MB <Maxtor 6G160E0 KA101V00> at ata5-master SATA300
ad12: 190781MB <SAMSUNG HD200HJ KF100-06> at ata6-master SATA150
GEOM_LABEL: Label for provider ad4s1 is ntfs/System Reserved.
acd1: DVDR <TSSTcorp CDDVDW SH-S223L/SB01> at ata7-master SATA150
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm1: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
hdac2: HDA Codec #0: Realtek ALC888
pcm2: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac2
pcm3: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac2
pcm4: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac2
pcm5: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac2
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label for provider ad12s1 is ntfs/Home.
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe1:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata5:0:0:0): CAM Status: SCSI Status Error
(probe1:ata5:0:0:0): SCSI Status: Check Condition
(probe1:ata5:0:0:0): NOT READY asc:3a,1
(probe1:ata5:0:0:0): Medium not present - tray closed
(probe1:ata5:0:0:0): Unretryable error
(probe0:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:0:0): CAM Status: SCSI Status Error
(probe0:ata2:0:0:0): SCSI Status: Check Condition
(probe0:ata2:0:0:0): NOT READY asc:3a,0
(probe0:ata2:0:0:0): Medium not present
(probe0:ata2:0:0:0): Unretryable error
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDRH20N 0L02> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata5 bus 0 target 0 lun 0
cd1: <TSSTcorp CDDVDW SH-S223L SB01> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad10s1a
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
rl0: link state changed to UP
module_register: module vgapci/radeon already exists!
Module vgapci/radeon failed to register: 17
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...7 3 4 1 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p3 #0: Thu Aug 20 16:35:30 CEST 2009
root@fatcat.at.home:/usr/obj/usr/src/sys/FATCAT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 6432477184 (6134 MB)
avail memory = 6187540480 (5900 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fed08000, 1000 (3) failed
acpi0: reservation of fed1c000, 4000 (3) failed
acpi0: reservation of fed20000, 20000 (3) failed
acpi0: reservation of fed50000, 40000 (3) failed
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of e0000000, 10000000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xfe7e0000-0xfe7fffff irq 16 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 16 at device 4.0 on pci2
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xc0000000-0xcfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci3
hdac0: <ATI RV770 High Definition Audio Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci3
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib4: <PCI-PCI bridge> irq 16 at device 8.0 on pci2
pci4: <PCI bus> on pcib4
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci4
hdac1: <ATI RV770 High Definition Audio Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.1 on pci4
hdac1: HDA Driver Revision: 20090329_0131
hdac1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe6ffc00-0xfe6fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
hdac2: <Intel 82801J High Definition Audio Controller> mem 0xfe6f8000-0xfe6fbfff irq 22 at device 27.0 on pci0
hdac2: HDA Driver Revision: 20090329_0131
hdac2: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib6
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfeac0000-0xfeafffff irq 17 at device 0.0 on pci5
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ale0: Ethernet address: 00:24:8c:3d:46:69
ale0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe6ff800-0xfe6ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci7
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:6b:93:ea:a6
rl0: [ITHREAD]
fwohci0: <Lucent FW322/323> mem 0xfebfe000-0xfebfefff irq 19 at device 3.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:c6:73:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:c6:73:12
fwe0: Ethernet address: 02:1e:8c:c6:73:12
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:01:c6:73:12 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbff4c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfe6fe800-0xfe6fefff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE, should be ED [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61a092006000920
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <vendor 0x0c45 USB camera, class 0/0, rev 1.10/1.01, addr 2> on uhub1
ulpt0: <HP Deskjet 5700, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub5
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
kbd2 at ukbd0
uhid1: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on uhub6
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 76318MB <Seagate ST380815AS 4.AAB> at ata2-master SATA300
ad6: 76319MB <Seagate ST380815AS 4.AAB> at ata3-master SATA300
acd0: DVDROM <HL-DT-STDVD-ROM GDRH20N/0L02> at ata4-master SATA150
ad10: 152626MB <Maxtor 6G160E0 KA101V00> at ata5-master SATA300
ad12: 190781MB <SAMSUNG HD200HJ KF100-06> at ata6-master SATA150
GEOM_LABEL: Label for provider ad4s1 is ntfs/System Reserved.
acd1: DVDR <TSSTcorp CDDVDW SH-S223L/SB01> at ata7-master SATA150
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm1: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
hdac2: HDA Codec #0: Realtek ALC888
pcm2: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac2
pcm3: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac2
pcm4: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac2
pcm5: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac2
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label for provider ad12s1 is ntfs/Home.
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe1:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata5:0:0:0): CAM Status: SCSI Status Error
(probe1:ata5:0:0:0): SCSI Status: Check Condition
(probe1:ata5:0:0:0): NOT READY asc:3a,1
(probe1:ata5:0:0:0): Medium not present - tray closed
(probe1:ata5:0:0:0): Unretryable error
(probe0:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:0:0): CAM Status: SCSI Status Error
(probe0:ata2:0:0:0): SCSI Status: Check Condition
(probe0:ata2:0:0:0): NOT READY asc:3a,0
(probe0:ata2:0:0:0): Medium not present
(probe0:ata2:0:0:0): Unretryable error
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDRH20N 0L02> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata5 bus 0 target 0 lun 0
cd1: <TSSTcorp CDDVDW SH-S223L SB01> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad10s1a
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label for provider ad10s1a is ufsid/4a8d6fce1f5f72bf.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label for provider ad10s1g is ufsid/4a8d6fce51dfd059.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label for provider ad10s1f is ufsid/4a8d6fd2125c3c5e.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label for provider ad10s1d is ufsid/4a8d6fd59d7f1059.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
GEOM_LABEL: Label for provider ad10s1e is ufsid/4a8d6fd72d97a479.
GEOM_LABEL: Label ufsid/4a8d6fce1f5f72bf removed.
GEOM_LABEL: Label ufsid/4a8d6fce51dfd059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd2125c3c5e removed.
GEOM_LABEL: Label ufsid/4a8d6fd59d7f1059 removed.
GEOM_LABEL: Label ufsid/4a8d6fd72d97a479 removed.
rl0: link state changed to UP
module_register: module vgapci/radeon already exists!
Module vgapci/radeon failed to register: 17
[bluescreen@fatcat ~]$
