Hallo zusammen,
ich habe leider erfolglos versucht, XEN als Domain0 unter NetBSD 3.0.1zu installieren, hinsichtlich der Sondkarte:
Mein Rechner:
notebook, microstar, md 40902, medion
model name : Intel Pentium 4 (686-class)
cpu MHz : 2600.21
Audiocard: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Folgende Optionen habe ich in der normalen GENERIC-Kernelkonfiguration (also ohne XEN) auskommentieren müssen, um meine Soundkarte benutzen zu können.
[in order to get the soundcard working i have to comment out following options in the GENERIC_Kernelconfigurationfile (without XEN):]
# Configure PCI using BIOS information
options PCIBIOS # PCI BIOS support
options PCIBIOSVERBOSE # PCI BIOS verbose info
options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
Leider gibt es diese Optionen für die Kernelkonfiguration von XEN0 nicht, bzw. sind diese nicht möglich.
[this options aren't there/possible for my XEN0/NetBSD kernelconfiguration,
if i boot with NetBSD/XEN0-kernel i get just told:]
Auszug aus
DMESG: see error number 2
error 1) *something not related to the sound-card
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00)
pci at ppb0 bus 1 not configured
error 2)
uich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space <- WTF WHY WHY WHY, warum nur?
error 3) *something related to usb, i havent tested usb right now
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: can't map memory space
Vielen Dank für eine Anregung, wie man den Sound zum laufen kriegen könnte.
mfg KackApfelFisch
####
here is all the output of dmesg :
#################################
NetBSD 3.0.1 (XEN0) #0: Fri Sep 15 00:55:39 CEST 2006
root@laptop:/usr/src/sys/arch/i386/compile/XEN0
total memory = 249 MB
avail memory = 244 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2600.17 MHz, id 0xf29
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
hypervisor0 at mainbus0
debug virtual interrupt using event channel 1
misdirect virtual interrupt using event channel 0
Domain controller: using event channel 2
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
PCI_PROBE_ROOT_BUSES: 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0
pci0 at hypervisor0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 648 Host Bridge (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00)
pci at ppb0 bus 1 not configured
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x14)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 96X UDMA6648 IDE controller (rev. 0x00)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel using event channel 4 for irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel using event channel 5 for irq 15
atabus1 at siside0 channel 1
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at irq 5, event channel 6
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at irq 5, event channel 6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci2: interrupting at irq 5, event channel 6
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: can't map memory space
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x90
sip0: interrupting at irq 5, event channel 6
sip0: Ethernet address 00:40:ca:be:9f:41
icsphy0 at sip0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ENE Technology CB1410 CardBus Controller (CardBus bridge) at pci0 dev 12 function 0 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci1 at hypervisor0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia product 0x0187 (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
Xen clock: using event channel 9
raidattach: Asked for 8 units
Kernelized RAIDframe activated
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-242, , UF02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 4 added (80x25, vt100 emulation)
set{u,g}id pid 1266 (gnome-pty-helper) was invoked by uid 1002 ppid 799 (gnome-terminal) with fd 2 closed
ich habe leider erfolglos versucht, XEN als Domain0 unter NetBSD 3.0.1zu installieren, hinsichtlich der Sondkarte:
Mein Rechner:
notebook, microstar, md 40902, medion
model name : Intel Pentium 4 (686-class)
cpu MHz : 2600.21
Audiocard: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Folgende Optionen habe ich in der normalen GENERIC-Kernelkonfiguration (also ohne XEN) auskommentieren müssen, um meine Soundkarte benutzen zu können.
[in order to get the soundcard working i have to comment out following options in the GENERIC_Kernelconfigurationfile (without XEN):]
# Configure PCI using BIOS information
options PCIBIOS # PCI BIOS support
options PCIBIOSVERBOSE # PCI BIOS verbose info
options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
Leider gibt es diese Optionen für die Kernelkonfiguration von XEN0 nicht, bzw. sind diese nicht möglich.
[this options aren't there/possible for my XEN0/NetBSD kernelconfiguration,
if i boot with NetBSD/XEN0-kernel i get just told:]
Auszug aus
DMESG: see error number 2
error 1) *something not related to the sound-card
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00)
pci at ppb0 bus 1 not configured
error 2)
uich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space <- WTF WHY WHY WHY, warum nur?
error 3) *something related to usb, i havent tested usb right now
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: can't map memory space
Vielen Dank für eine Anregung, wie man den Sound zum laufen kriegen könnte.
mfg KackApfelFisch
####
here is all the output of dmesg :
#################################
NetBSD 3.0.1 (XEN0) #0: Fri Sep 15 00:55:39 CEST 2006
root@laptop:/usr/src/sys/arch/i386/compile/XEN0
total memory = 249 MB
avail memory = 244 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2600.17 MHz, id 0xf29
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
hypervisor0 at mainbus0
debug virtual interrupt using event channel 1
misdirect virtual interrupt using event channel 0
Domain controller: using event channel 2
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
PCI_PROBE_ROOT_BUSES: 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0
pci0 at hypervisor0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 648 Host Bridge (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00)
pci at ppb0 bus 1 not configured
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x14)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 96X UDMA6648 IDE controller (rev. 0x00)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel using event channel 4 for irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel using event channel 5 for irq 15
atabus1 at siside0 channel 1
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at irq 5, event channel 6
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at irq 5, event channel 6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci2: interrupting at irq 5, event channel 6
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: can't map memory space
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x90
sip0: interrupting at irq 5, event channel 6
sip0: Ethernet address 00:40:ca:be:9f:41
icsphy0 at sip0 phy 1: ICS1893 10/100 media interface, rev. 1
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ENE Technology CB1410 CardBus Controller (CardBus bridge) at pci0 dev 12 function 0 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci1 at hypervisor0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia product 0x0187 (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
Xen clock: using event channel 9
raidattach: Asked for 8 units
Kernelized RAIDframe activated
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-242, , UF02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 4 added (80x25, vt100 emulation)
set{u,g}id pid 1266 (gnome-pty-helper) was invoked by uid 1002 ppid 799 (gnome-terminal) with fd 2 closed
Zuletzt bearbeitet: