kong
Well-Known Member
Hallo, ich habe gerade ein Thinkpad x60 und mich entschieden NetBSD zu installieren, da mein Eindruck von allem, was ich so erfahren konnte her der ist, dass man von allen BSDs mit NetBSD am ehesten Strom sparen kann, weil das ACPI und die Unterstützung von EST da am weitesten sind. Standby-Modus usw. brauche ich eigentlich gar nicht, für mich ist es Ausreichend den Computer immer auszuschalten, aber besonders lange Laufzeiten kriege ich nicht hin. Vielleicht habe ich eine wichtige Einstellung zum Stromsparen verpasst, oder der Akku ist schon zu schlecht -- ich weiß es nicht, also hier mal die Frage, ob jemandem was dazu einfällt, wie ich noch mehr Strom sparen könnte.
Bisher habe ich eigentlich nur den Prozessor so langsam wie möglich gemacht, die Hintergrundbeleuchtung auf "gerade noch sichtbar", je nach Lichtlage eingestellt, auf X verzichtet. Zum verlangsamen habe ich estd benutzt, der Computer ist aber immernoch zu schnell für meine mobilen Bedürfnisse, geht es vielleicht den Proz. zu "untertakten"? Also hier mal die Infos (sorry, ziemlich lang, aber dafür hoffentlich ausreichend für Leute, die sich damit auskennen):
Also: Laufzeit war 13 min., Akkrestlaufzeit hat sich um 15 min. verkürzt, was daran liegen könnte dass ich wärend dem erstellen der Datei eine mail beantworten musste und pine den Verbrauch erhöht hat. Aber insgesammt habe ich auch den Eindruck, dass de Akku viel schneller am ende ist als apm sagt, z.B. kann ich einen kernel ohne Dependencies ("make depend" noch mit AC-Power) nicht mit einer 100% Akku-Ladung kompilieren, ob ich den Prozessor zu dem zweck mal schneller mache oder nicht.
Wenn jemandem dazu was einfällt, sei's auch nur dass der Akku wohl im Arsch ist, wüsste ich es gerne.
Grüße, Stefan
P.S.: Also bei normalem Gebrauch, was meistens *.tex-Dokumente mit emacs schreiben, selten auch noch mit latex kompilieren, und etwas mailverker ist, kriege ich keine Laufzeit von mehr als 50 min. hin.
Bisher habe ich eigentlich nur den Prozessor so langsam wie möglich gemacht, die Hintergrundbeleuchtung auf "gerade noch sichtbar", je nach Lichtlage eingestellt, auf X verzichtet. Zum verlangsamen habe ich estd benutzt, der Computer ist aber immernoch zu schnell für meine mobilen Bedürfnisse, geht es vielleicht den Proz. zu "untertakten"? Also hier mal die Infos (sorry, ziemlich lang, aber dafür hoffentlich ausreichend für Leute, die sich damit auskennen):
Code:
Hier erst mal output von uptime und gleich dahinter von apm,
das kommt am Ende nochmal, damit Leute mit Ahnung vielleicht
daran sehen können ob das normaler Verbrauch ist:
9:58PM up 18 mins, 2 users, load averages: 0.00, 0.00, 0.00
Battery charge state: high
Battery remaining: 46 percent (90 minutes)
A/C adapter state: not connected
Power management enabled
Number of batteries: 1
Jetzt output vo ps -ax:
PID TTY STAT TIME COMMAND
0 ? OKl 0:00.18 [system]
1 ? Is 0:00.00 init
114 ? Ss 0:00.01 /usr/sbin/syslogd -s
240 ? Is 0:00.00 /usr/sbin/sshd
278 ? I 0:00.01 qmgr -l -t unix -u
296 ? I 0:00.01 pickup -l -t fifo -u
339 ? Is 0:00.01 /usr/libexec/postfix/master
348 ? Is 0:00.00 /usr/sbin/inetd -l
367 ? Is 0:00.00 /usr/sbin/cron
381 ? Ss 0:01.12 SCREEN (screen-4.0.3)
446 ? Is 0:00.00 dhclient wm0
387 ttyp0 Is 0:00.01 /bin/ksh
401 ttyp0 S 0:00.09 ksh
1422 ttyp0 O+ 0:00.00 ps -ax
468 ttyp1 Is+ 0:00.04 /bin/ksh
345 ttyE0 Is 0:00.09 login
351 ttyE0 I 0:00.01 -ksh
358 ttyE0- S 0:00.01 /usr/pkg/sbin/estd -d -b -M 1000
375 ttyE0 S+ 0:00.01 screen (screen-4.0.3)
364 ttyE1 Is+ 0:00.00 /usr/libexec/getty Pc ttyE1
312 ttyE2 Is+ 0:00.00 /usr/libexec/getty Pc ttyE2
362 ttyE3 Is+ 0:00.00 /usr/libexec/getty Pc ttyE3
estd -f:
Supported frequencies (Enhanced SpeedStep Mode):
1000 MHz
1167 MHz
1333 MHz
1500 MHz
1667 MHz
1833 MHz
aktueller takt laut sysctl:
machdep.est.frequency.current = 1000
Prozessorinfos von cpuctl:
cpu0: Intel Pentium M (Yonah) (686-class), 1828.95 MHz, id 0x6e8
cpu0: features 0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 0xbfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features 0xbfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 0xc1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: features3 0x100000<XD>
cpu0: "Genuine Intel(R) CPU T2400 @ 1.83GHz"
cpu0: I-cache 32KB 64B/line 8-way, D-cache 32KB 64B/line 8-way
cpu0: L2 cache 2MB 64B/line 8-way
cpu0: ITLB 128 4KB entries 4-way, 2 4MB entries fully associative
cpu0: DTLB 128 4KB entries 4-way, 8 4MB entries 4-way
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: family 06 model 0e extfamily 00 extmodel 00
cpu1: Intel Pentium M (Yonah) (686-class), 1828.95 MHz, id 0x6e8
cpu1: features 0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 0xbfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features 0xbfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 0xc1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu1: features3 0x100000<XD>
cpu1: "Genuine Intel(R) CPU T2400 @ 1.83GHz"
cpu1: I-cache 32KB 64B/line 8-way, D-cache 32KB 64B/line 8-way
cpu1: L2 cache 2MB 64B/line 8-way
cpu1: ITLB 128 4KB entries 4-way, 2 4MB entries fully associative
cpu1: DTLB 128 4KB entries 4-way, 8 4MB entries 4-way
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: Core ID 1
cpu1: family 06 model 0e extfamily 00 extmodel 00
noch dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_STABLE (GENERIC) #0: Tue Jul 14 12:04:21 CEST 2009
stefan@thinkpad.termnews.com:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 2038 MB
avail memory = 1991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 1706AS3 (ThinkPad X60)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1828MHz, id 0x6e8
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1833 1667 1500 1333 1167 1000
cpu1 at mainbus0 apid 1: Intel 686-class, 1828MHz, id 0x6e8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7B ,00001060>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 93P5029 981
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 97.0C passive 38.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:d3:2b:25:c6
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4227 (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17
wpi0: MoW1, address 00:18:de:1d:cf:81
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: disabling notification events
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci4 at ppb3 bus 12
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 21
pci5: i/o space enabled
cbb0 at pci5 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xb4)
cbb0: can't map socket base address 0xe4300000
cbb0: can't map socket base address 0xc0a1f356: io mode
fwohci0 at pci5 dev 0 function 1: vendor 0x1180 product 0x0552 (rev. 0x09)
fwohci0: can't map OHCI register space
vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x18) at pci5 dev 0 function 2 not configured
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c5
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1828946130 Hz quality 3000
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <HTS721060G9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Und hier nochmal der Stand der Dinge, habe inzwischen nur eine mail
mit pine beantwortet:
10:11PM up 31 mins, 2 users, load averages: 0.02, 0.02, 0.00
Battery charge state: high
Battery remaining: 38 percent (75 minutes)
A/C adapter state: not connected
Power management enabled
Number of batteries: 1
Also: Laufzeit war 13 min., Akkrestlaufzeit hat sich um 15 min. verkürzt, was daran liegen könnte dass ich wärend dem erstellen der Datei eine mail beantworten musste und pine den Verbrauch erhöht hat. Aber insgesammt habe ich auch den Eindruck, dass de Akku viel schneller am ende ist als apm sagt, z.B. kann ich einen kernel ohne Dependencies ("make depend" noch mit AC-Power) nicht mit einer 100% Akku-Ladung kompilieren, ob ich den Prozessor zu dem zweck mal schneller mache oder nicht.
Wenn jemandem dazu was einfällt, sei's auch nur dass der Akku wohl im Arsch ist, wüsste ich es gerne.
Grüße, Stefan
P.S.: Also bei normalem Gebrauch, was meistens *.tex-Dokumente mit emacs schreiben, selten auch noch mit latex kompilieren, und etwas mailverker ist, kriege ich keine Laufzeit von mehr als 50 min. hin.
Zuletzt bearbeitet: