OpenBSD 3.7 ist da!!!

dettus

dettus

Bicycle User
hey!

seit gestern habe ich endlich OpenBSD 3.7! grund genug fuer mich, heute erstmal loszulaufen und mir eine neue 250gig platte zu kaufen.

erster eindruck: ich war ueberrascht! das formatieren der festplatte lief innerhalb von einer minute ab!
zweiter eindruck: x (nicht mehr xfree) startet gleich ohne zu murren in die hoechste aufloesung. ohne, dass ich irgendwas an der xorg.conf rumfrickeln musste.
dritter eindruck: die soundausgabe ist HERVORRAGEND!!!! auf der kiste lief vorher ein gentoo linux. und ich weiss nicht warum, aber da waren die boxen oefters mal am rauschen. ich hatte schon daran gedacht mir neue zu kaufen. aber ich hab gemerkt, dass das gar nicht noetig war! es lag wohl doch an der software....


das einzige problem duerfte also auf absehbare zeit doch nur die unterstuetzung der nvidia-3d-funktionen sein. damit kann ich aber leben, seitdem ich mein powerbook zum daddeln benutze *ggg*


in diesem sinne: KAUFEMPFEHLUNG!!!
das booklet ist auch wieder richtig suess gemacht. die wizard of os-geschichte ist auch fuer mitteleuropaeer verstaendlich.

und hier meine dmesg:
Code: 
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class) 2.08 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 536387584 (523816K)
avail mem = 482521088 (471212K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(96) BIOS, date 02/25/03, BIOS32 rev. 0 @ 0xfb490
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xe400
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xa2
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa3
"Nvidia nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce2 USB" rev 0xa3: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "Nvidia nForce2 USB" rev 0xa3: irq 5, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "Nvidia nForce2 USB" rev 0xa3: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
rl0 at pci1 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:50:fc:a4:90:6b
rlphy0 at rl0 phy 0: RTL internal phy
bktr0 at pci1 dev 9 function 0 "Brooktree BT878" rev 0x11: irq 11
bktr0: Hauppauge Model 44914 C121
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, remote control.
radio0 at bktr0
"Brooktree BT878 Audio" rev 0x11 at pci1 dev 9 function 1 not configured
eap0 at pci1 dev 10 function 0 "Ensoniq CT5880" rev 0x04: irq 5
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
pciide0 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3250823A>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD1200JB-00DUA3>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide0 channel 1 drive 0: <WDC WD1200JB-00DUA0>
wd2: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, DVD-ROM E608, 1.40> SCSI0 5/cdrom removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xa2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "Nvidia", unknown product 0x0281 rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 matched BIOS disk 81
wd2c:  aborted command, interface CRC error reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
wd2: transfer error, downgrading to Ultra-DMA mode 4
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
wd2c:  aborted command, interface CRC error reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
wd2: transfer error, downgrading to Ultra-DMA mode 3
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 3
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
wd2c:  aborted command, interface CRC error reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
wd2: soft error (corrected)
wd2: no disk label
dkcsum: wd2 matched BIOS disk 82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
 
dettus schrieb:
das booklet ist auch wieder richtig suess gemacht. die wizard of os-geschichte ist auch fuer mitteleuropaeer verstaendlich.
Zum Vergrößern anklicken....

Inbedingt auch die Rueckseite des Jevelcases lesen, die ist auch nicht schlecht.
:)

Von den neuen Features, insbesondere pkg_add -r, mal ganz zu schweigen.
 
okay, nun hab ich doch ein fehlerchen gefunden... math/octave kommt nicht mit gcc3 klar!

naja, aber mit ein wenig fingerspitzengefuehl gehts doch:

go to /usr/ports/math/octave and run
Code: 
% make install
as usual. this will fail. then just download octave 2.1.70 from ftp://ftp.octave.org/pub/octave/octave-2.1.70.tar.gz, and unpack it into a big partition (because it eats up more than 500mb while compiling). then do (as root, because otherwise you will get a nasty "memory exausted" message) the usual
Code: 
% ./configure --prefix=/usr/local && gmake && gmake install
stuff (after you have gmake installed, of course!) and you'll have a working version of octave installed on your computer. remember to compile gnuplot BEFORE you compile octave. i will post the errormessage later, so more people googling for help will find this.

oh, yeah, the error is
Code: 
In file included from mx-defs.h:72,
                 from dColVector.h:32,
                 from Bounds.h:32,
                 from Bounds.cc:33:
oct-cmplx.h:28: error: syntax error before `;' token
In file included from dColVector.h:32,
                 from Bounds.h:32,
                 from Bounds.cc:33:
mx-defs.h:81: error: syntax error before `&' token
mx-defs.h:82: error: `c_c_Mapper' was not declared in this scope
mx-defs.h:82: error: syntax error before `&' token
mx-defs.h:82: error: ISO C++ forbids declaration of `Complex' with no type
mx-defs.h:82: error: typedef `Complex' is initialized (use __typeof__ instead)
gmake[2]: *** [Bounds.o] Error 1
gmake[2]: Leaving directory `/usr/ports/math/octave/w-octave-2.0.16/octave-2.0.16/liboctave'
gmake[1]: *** [liboctave] Error 2
gmake[1]: Leaving directory `/usr/ports/math/octave/w-octave-2.0.16/octave-2.0.16'
gmake: *** [all] Error 2
*** Error code 2

Stop in /usr/ports/math/octave (line 1769 of /usr/ports/infrastructure/mk/bsd.port.mk).

p.s.: lets see how much more ports will fail over the next few weeks due to the fact, that the new gcc is version 3. (maybe we'll have to wait for openbsd 3.8 to call it stable again)

ich schraenke hiermit meine kaufempfehlung offiziell ein: wer das ding produktiv einsetzt und das portssystem regelmaessig benutzt sollte vorsichtig sein. schade!
 
Zuletzt bearbeitet:
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben