Code:
kldload mlx4en
mlx4_core0: <mlx4_core> mem 0xc0100000-0xc01fffff,0xc0800000-0xc0ffffff irq 32 at device 5.0 on pci0
<6>mlx4_core: Mellanox ConnectX core driver v3.4.1 (October 2017)
mlx4_core0: Unable to determine PCI device chain minimum BW
mlx4_core0: command 0x31 timed out (go bit not cleared)
mlx4_core0: NOP command failed to generate MSI-X interrupt IRQ 266)
mlx4_core0: Trying again without MSI-X
mlx4_core0: Failed to initialize event queue table, aborting
device_attach: mlx4_core0 attach returned 6
vmstat -i
interrupt total rate
irq4: uart0 1025 3
cpu0:timer 6187 19
cpu1:timer 4818 14
irq265: virtio_pci0 2243 7
Total 14273 43
Code:
vm passthru
DEVICE BHYVE ID READY DESCRIPTION
hostb0 0/0/0 No RD890 Northbridge only dual slot (2x8) PCI-e GFX Hydra part
none0 0/0/2 No RD890S/RD990 I/O Memory Management Unit (IOMMU)
pcib1 0/2/0 No RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
pcib2 0/3/0 No RD890/RD9x0 PCI to PCI bridge (PCI Express GFX port 1)
pcib3 0/9/0 No RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
pcib4 0/10/0 No RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5)
pcib5 0/11/0 No RD890/RD990 PCI to PCI bridge (PCI Express GFX2 port 0)
ahci0 0/17/0 No SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
ohci0 0/18/0 No SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
ohci1 0/18/1 No SB7x0 USB OHCI1 Controller
ehci0 0/18/2 No SB7x0/SB8x0/SB9x0 USB EHCI Controller
ohci2 0/19/0 No SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
ohci3 0/19/1 No SB7x0 USB OHCI1 Controller
ehci1 0/19/2 No SB7x0/SB8x0/SB9x0 USB EHCI Controller
intsmb0 0/20/0 No SBx00 SMBus Controller
isab0 0/20/3 No SB7x0/SB8x0/SB9x0 LPC host controller
pcib6 0/20/4 No SBx00 PCI to PCI Bridge
ohci4 0/20/5 No SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
hostb1 0/24/0 No Family 15h Processor Function 0
hostb2 0/24/1 No Family 15h Processor Function 1
hostb3 0/24/2 No Family 15h Processor Function 2
hostb4 0/24/3 No Family 15h Processor Function 3
hostb5 0/24/4 No Family 15h Processor Function 4
hostb6 0/24/5 No Family 15h Processor Function 5
ppt0 6/0/0 Yes 82580 Gigabit Network Connection
ppt1 6/0/1 Yes 82580 Gigabit Network Connection
ppt2 6/0/2 Yes 82580 Gigabit Network Connection
ppt3 6/0/3 Yes 82580 Gigabit Network Connection
ppt4 5/0/0 Yes SAS2308 PCI-Express Fusion-MPT SAS-2
em0 4/0/0 No 82574L Gigabit Network Connection
ppt5 3/0/0 Yes 82574L Gigabit Network Connection
ppt6 2/0/0 Yes MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s]
vgapci0 1/9/0 No ASPEED Graphics Family
Gast und Host: 12.0-RELEASE-p8 GENERIC
Auf dem Host direkt funktioniert die Karte und passthru an sich bei anderen Karten funktioniert problemlos.
Hat jemand noch einen heißen Tip für mich außer andere Karte kaufen?