SIM-Cardreader APU4

f0x

Punk
Hi,
hat irgendjemand schonmal den SIM-Kartenslot auf einem APU4 Board zum laufen bekommen? Bei mir taucht der weder in der dmesg auf, noch wird der wie beschrieben über USB als device erkannt oder gar in der ifconfig angegeben. (Unter OpenBSD)

Habe ich irgendwas falsch verstanden? Muss ich auf dem Board noch etwas ändern?
Habe das BIOS weitestgehend so gelassen, nur EHCI0 noch zum Test dazu aktiviert, da ich in einigen (älteren) Quellen gelesen hatte, dass die Slots manchmal über EHCI eingehangen werden.

Ich hätte halt gedacht, SIM-Karte rein und wenigstens das Device würde irgendwo registriert werden, aber scheinbar erkennt OpenBSD nichtmal das. Es ist auch irgendwie relativ schwierig, mal genaue Angaben von pcengines zu finden, was für Chips denn jetzt auf den Boards sitzen.
Oder brauche ich noch ZUSÄTZLICH zu dem SIM-Leser einen LTE Modem-Chip?

Kann jemand helfen?

Liebe Grüße :)
f0x

Code:
# dmesg
OpenBSD 6.7 (GENERIC.MP) #6: Thu Sep  3 14:08:18 MDT 2020
    root@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1996484608 (1903MB)
avail mem = 1923416064 (1834MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7ee8b040 (13 entries)
bios0: vendor coreboot version "v4.12.0.4" date 08/27/2020
bios0: PC Engines apu4
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET
acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-64
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.28 MHz, 16-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PBR4)
acpiprt2 at acpi0: bus 2 (PBR5)
acpiprt3 at acpi0: bus 3 (PBR6)
acpiprt4 at acpi0: bus 4 (PBR7)
acpiprt5 at acpi0: bus -1 (PBR8)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 115 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
amdgpio0 at acpi0: GPIO uid 0 addr 0xfed81500/0x300 irq 7, 184 pins
"PRP0001" at acpi0 not configured
"PRP0001" at acpi0 not configured
"PRP0001" at acpi0 not configured
"PRP0001" at acpi0 not configured
"PRP0001" at acpi0 not configured
"PRP0001" at acpi0 not configured
"BOOT0000" at acpi0 not configured
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD 16h Root Complex" rev 0x00
vendor "AMD", unknown product 0x1567 (class system subclass IOMMU, rev 0x00) at pci0 dev 0 function 2 not configured
pchb1 at pci0 dev 2 function 0 "AMD 16h Host" rev 0x00
ppb0 at pci0 dev 2 function 1 "AMD 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:55:ca:b8
ppb1 at pci0 dev 2 function 2 "AMD 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:55:ca:b9
ppb2 at pci0 dev 2 function 3 "AMD 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:55:ca:ba
ppb3 at pci0 dev 2 function 4 "AMD 16h PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:55:ca:bb
ccp0 at pci0 dev 8 function 0 "AMD 16h Crypto" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS32GMSA370, P122> naa.57c3548193328983
sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
ehci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMI
iic0 at piixpm0
iic1 at piixpm0
iic1: addr 0x4c 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
pchb2 at pci0 dev 24 function 0 "AMD 16h Link Cfg" rev 0x00
pchb3 at pci0 dev 24 function 1 "AMD 16h Address Map" rev 0x00
pchb4 at pci0 dev 24 function 2 "AMD 16h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD 16h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD 16h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD 16h Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
intr_establish: pic ioapic0 pin 7: can't share type 3 with 2
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
vmm0 at mainbus0: SVM/RVI
uhub3 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices Hub" rev 2.00/0.18 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Advanced Micro Devices Hub" rev 2.00/0.18 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f1489a3aa0bee73f.a) swap on sd0b dump on sd0b

Code:
# usbdevs -vv
Controller /dev/usb0:
addr 01: 1022:0000 AMD, xHCI root hub
         super speed, self powered, config 1, rev 1.00
         driver: uhub0
         port 01: 0000.02a0 power Rx.detect
         port 02: 0000.02a0 power Rx.detect
         port 03: 0000.02a0 power Rx.detect
         port 04: 0000.02a0 power Rx.detect
Controller /dev/usb1:
addr 01: 1022:0000 AMD, EHCI root hub
         high speed, self powered, config 1, rev 1.00
         driver: uhub1
         port 01: 0000.0503 connect enabled power
         port 02: 0000.0500 power
addr 02: 0438:7900 Advanced Micro Devices, Hub
         high speed, self powered, config 1, rev 0.18
         driver: uhub3
         port 01: 0000.0100 power
         port 02: 0000.0100 power
         port 03: 0000.0100 power
         port 04: 0000.0100 power
Controller /dev/usb2:
addr 01: 1022:0000 AMD, EHCI root hub
         high speed, self powered, config 1, rev 1.00
         driver: uhub2
         port 01: 0000.0503 connect enabled power
         port 02: 0000.0500 power
addr 02: 0438:7900 Advanced Micro Devices, Hub
         high speed, self powered, config 1, rev 0.18
         driver: uhub4
         port 01: 0000.0100 power
         port 02: 0000.0100 power
         port 03: 0000.0100 power
         port 04: 0000.0100 power
 
Hallo f0x!

Ja, ich habe ein paar Apus als LTE Router Laufen.

Das ist kein herkömmlicher SIM Leser wie du ihn als USB Gerât kennst. Was möchtest du genau machen?

Du findest auf der Pcengines Seite auch einen Schaltplan.
 
Hi roema,
ich möchte einen Backup-Kanal erstellen, den ich nutzen kann, wenn meine reguläre Leitung mal nicht funktioniert.
Habe auch mitlerweile rausgefunden, dass ich da wohl eine LTE-Karte für brauche.

Aber prinzipiell sollte das alles gehen, oder? In wie weit ist das denn "kein herkömmlicher SIM Leser"? Was sind die Unterschiede?

Grüße
f0x
 
Die SIM Karte ist direkt mit einem der Mini-PCIe Slots verbunden. Du kannst die SIM Karte also nur mit einer passenden LTE Karte o.ä. verwenden.
 
Hi Crest,
habe mir jetzt eine bestellt. Das ging aus den ganzen Beschreibungen irgendwie nicht so richtig hervor oder ich habe es einfach überlesen.
Danke dir.
 
Zurück
Oben