Soundkarte gibt nichts von sich...

S

salex

*BSD-Fighter
Hallo Community..

Ich habe heute ein OpenBSD 3.6 auf meinen Laptop (Fujitsu Siemens Amilo D 7820) installiert..
Nun gut, apm geht nicht aber das ist nicht so schlimm..

Was mich stört ist aber, dass kein Ton kommt, wenn ich etwas abspiele.

Der Biepton geht allerdings (aber das läuft ja nicht über die Soundkarte, oder?).

Wenn ich mplayer <lied> starte kommt kein fehler.

in der konsole erscheint dann diese meldung:

auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz

(auich0 existiert bei mir in /dev BTW nicht.)

Mein kompletter dmesg vom Systemstart:

Code: 
OpenBSD 3.6-stable (GENERIC) #0: Sun Mar 27 15:51:46 CEST 2005
    root@eris.home:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,
ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 534290432 (521768K)
avail mem = 480616448 (469352K)
using 4278 buffers containing 26816512 bytes (26188K) of memory
User Kernel Config
UKC> disable apm
239 apm0 disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(69) BIOS, date 06/02/03, BIOS32 rev. 0 @ 0xfd600
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd600/0xa00
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 646 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9 Lf" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x04
"SIS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 645DX: DMA, channel 0
 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4018GAS>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CDRW/DVD SBW-242, UX10> SCSI0 5/cdrom remova
ble
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SIS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 11, SiS7012 AC97
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 11, version 1.0
, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 11, version 1.0
, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2 "SIS 5597/5598 USB" rev 0x0f: irq 11, version 1.0
, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3 "SIS 7002 USB" rev 0x00: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: SIS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x91: irq 11, address 0
0:00:e2:9a:1a:4e
icsphy0 at sis0 phy 1: ICS1893 10/100 media interface, rev. 1
cbb0 at pci0 dev 9 function 0 vendor "ENE", unknown product 0x1420 rev 0x01: irq
 11
cbb1 at pci0 dev 9 function 1 vendor "ENE", unknown product 0x1420 rev 0x01: irq
 11
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x10, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia1 at cardslot1
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: ACROX Combo Mouse, rev 1.00/5.50, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz

Bei cat /dev/urandom > /dev/audio kommt nichts.

Ich danke für schnelle Hilfe
(ich fahre morgen weg und bräuchte da den sound).
 
Achja, das hatte ich vergessen:

Code: 
eris% mixerctl -a
outputs.master=255,255
outputs.master.mute=off
outputs.mono=255
outputs.mono.mute=off
outputs.mono.source=mixerout
outputs.headphones=255,255
outputs.headphones.mute=off
outputs.bass=255
outputs.treble=255
inputs.speaker=255
inputs.speaker.mute=off
inputs.phone=191
inputs.phone.mute=on
inputs.mic=191
inputs.mic.mute=on
inputs.mic.preamp=off
inputs.mic.source=mic0
inputs.line=255,255
inputs.line.mute=on
inputs.cd=255,255
inputs.cd.mute=on
inputs.video=191,191
inputs.video.mute=on
inputs.aux=255,255
inputs.aux.mute=on
inputs.dac=255,255
inputs.dac.mute=on
record.source=line
record.volume=255,255
record.volume.mute=on
record.mic=0
record.mic.mute=off
outputs.loudness=off
outputs.spatial=off
outputs.spatial.center=0
outputs.spatial.depth=0
outputs.surround=255,255
outputs.surround.mute=off
outputs.center=255
outputs.center.mute=off
outputs.lfe=255
outputs.lfe.mute=off

Code: 
eris% audioctl -a
name=SiS7012 AC97
version=0xa0
config=auich0
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,mmap,independent
full_duplex=0
fullduplex=0
blocksize=1600
hiwat=40
lowat=1
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=1600
play.samples=27600
play.eof=0
play.pause=0
play.error=1
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=255
record.balance=32
record.port=0x2
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
 
Wenn ich versuche in xmms etwas abzuspielen, dann geht gar nichts.

ich wähle ein lied aus, aber er nimmt es nicht an. Egal ob mp3 oder ogg.

Egal ob root oder nicht.
 
Evtl. ist es hilfreich mit einem mixer die Lautstärkeeinstellungen zu überprüfen.

HTH
chaos, der eigentlich keine Ahnung von OBSD hat
 
Hmm. Ist jetzt ein bisschen peinlich, aber es lag daran, das trotzdem etwas wichtiges gemutet war, und zwar

inputs.dac.mute

Aber mal ehrlich, wer denkt schon an "inputs", wenn man doch nen output haben will ;)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben