beutelhalsbein
Member
Moin, mein Problem: Nach ca. 8-9h Rechnerbetrieb bockt die USB-Maus. Das System friert nicht direkt ein aber es macht Zicken. Bei KDE bleibt die Maus komplett stehen, bei fluxbox geht die linke Taste nicht mehr. Eine andere Maus hilft auch nicht.
Das System ist ein aktuelles 5.4er FreeBSD, ACPI disabled. Unter Linux gings.
Hier die vmstat- und dmesg-Ausgabe:
Die Fernsehkarte teilt sich also mit dem USB-Hostcontroller rein? Ist das gängig?
Zuviel Zeug, zuwenig Interrupts? Und den Teil hier, kann ich nicht zuordnen:
Für Lösungsmöglichkeiten dankbar, Beutelhalsbein.
Das System ist ein aktuelles 5.4er FreeBSD, ACPI disabled. Unter Linux gings.
Hier die vmstat- und dmesg-Ausgabe:
Code:
interrupt total rate
irq0: clk 3603350 99
irq1: atkbd0 7589 0
irq6: fdc0 11 0
irq7: ppc0 382 0
irq8: rtc 4612306 127
irq10: pcm0 fxp0 16341611 453
irq11: uhci0 bktr0+ 3364913 93
irq13: npx0 1 0
irq14: ata0 1238374 34
irq15: ata1 51 0
Total 29168588 809
Die Fernsehkarte teilt sich also mit dem USB-Hostcontroller rein? Ist das gängig?
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p5 #1: Tue Jul 26 18:54:10 CEST 2005
root@beutelhals.foo.bar:/usr/obj/usr/src/sys/MYGENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
avail memory = 388464640 (370 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 UDMA33 controller> port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 11 at device 14.0 on pci0
bktr0: Hauppauge Model 61324 D208
bktr0: Detected a MSP3415D-A2 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 14.1 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd800-0xd81f mem 0xec000000-0xec0fffff,0xec102000-0xec102fff irq 10 at device 16.0 on pci0miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:1d:d5:02
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xdc00-0xdc3f irq 12 at device 18.0 on pci0
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:60:97:b8:90:04
pcm0: <Creative CT5880-C> port 0xe000-0xe03f irq 10 at device 20.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ums0: Macally Peripherals Macally DotMouse, rev 1.10/0.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 501140163 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 14659MB <FUJITSU MPF3153AT/0028> [29785/16/63] at ata0-master UDMA33
ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave UDMA33
acd0: CDROM <CD-532E/1.0A> at ata1-master PIO3
Mounting root from ufs:/dev/ad0s1a
drm0: <Matrox G550 (AGP)> mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
Zuviel Zeug, zuwenig Interrupts? Und den Teil hier, kann ich nicht zuordnen:
Code:
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Für Lösungsmöglichkeiten dankbar, Beutelhalsbein.