USB Probleme

[s705081]

Hi *,

wenn ich mein Notebook mit eingesteckter USB Maus starte Bleibt FreeBSD nach dem Kernel USB initialisieren hängen. Gibt es da ein ein bekannten Bug oder ein hint?

System 5.3

Gruss Sven

 

[teuk]

hi,

falls dir eine Beantwortung deiner Frage am Herzen liegt, waere es vielleicht ganz sinnvoll ein bisschen mehr zu deinem System zu schreiben. 5.3 ist ja schon ein guter Anfang und da es im FreeBSD-Teil des Forums ist, tippe ich mal auf FreeBSD 5.3. Aber wie sieht es mit dem Notebooktyp, Maustyp, dmesg und dergleichen aus?


teuk

 

[s705081]

Ok soll kommen
FreeBSD 5.3 und 5.4 (mal getestet gleicher Fehler)

IBM Thinkpad x20

USB Logitech

Sonst habe ich keine logs da der Rechner noch vor dem init stehen bleibt.

Gruss Sven

dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov  5 04:19:18 UTC 2004
    root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (312.40-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 201261056 (191 MB)
avail memory = 187265024 (178 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
    ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._INI] (Node 0xc13ce260), AE_AML_NO_RETURN_VALUE
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 8.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 8.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1840-0x187f mem 0xf4020000-0xf403ffff,0xf4010000-0xf4010fff irq 11 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:10:a4:15:e2:9f
pci0: <simple comms, UART> at device 10.1 (no driver attached)
pcm0: <Crystal Semiconductor CS4281> mem 0xf4000000-0xf400ffff,0xf4012000-0xf4012fff irq 11 at device 11.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Cirrus Logic CS4297A AC97 Codec>
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
ppc0: <Standard parallel printer port> port 0x3bc-0x3bf irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdcfff,0xd8000-0xdbfff,0xcd000-0xce7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 312395627 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
pff0: <Intersil PRISM Duette/Prism GT Wireless LAN adapter> mem 0x20000000-0x20001fff irq 11 at device 0.0 on cardbus0
pff0: Ethernet address: 00:50:fc:b7:2f:69
pff0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pff0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ad0: 38154MB <TOSHIBA MK4019GAX/FA002A> [77520/16/63] at ata0-master UDMA33
pccard1: Allocation failed for cfe 0
ata2: <Transcend    128M    > at port 0x100-0x10f irq 11 function 0 config 1 on pccard1
ad4: 122MB <Transcend 128M/1.1> [978/8/32] at ata2-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: /extern was not properly dismounted
pflog0: promiscuous mode enabled
uhub1: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 2
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 3, iclass 3/1
ums0: 7 buttons and Z dir.