[V] ALIX.2D2 Board inkl. WLAN-Karte und 8 GB CF-Karte
- Ersteller Ceres
- Erstellt am
Hallo,
ist zwar schon etwas länger her, aber trotzdem nochmals Danke für die reibungslose Abwicklung. Falls es vielleicht von Interesse ist: NetBSD 5.1 läuft wie ne eins auf dem Gerät, es ersetzt mir bereits den bisherigen DNS/DHCPD/NAT Server. WLAN konnte ich leider noch nicht testen. Mal sehen wie Horde und amavis drauf läuft. Diese geskripteten Frameworks sind ja die reinsten Speicherschweine.
ist zwar schon etwas länger her, aber trotzdem nochmals Danke für die reibungslose Abwicklung. Falls es vielleicht von Interesse ist: NetBSD 5.1 läuft wie ne eins auf dem Gerät, es ersetzt mir bereits den bisherigen DNS/DHCPD/NAT Server. WLAN konnte ich leider noch nicht testen. Mal sehen wie Horde und amavis drauf läuft. Diese geskripteten Frameworks sind ja die reinsten Speicherschweine.
Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1 (COLUMBUS) #3: Sat Sep 10 23:39:58 CEST 2011
jochen@columbus:/usr/obj/sys/arch/i386/compile/COLUMBUS.ALIX
total memory = 255 MB
avail memory = 246 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Generic PC
mainbus0 (root)
cpu0 at mainbus0: AMD 586-class, 498MHz, id 0x5a2
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: vendor 0x1022 product 0x2080 (rev. 0x33)
glxsb0 at pci0 dev 1 function 2: RNG AES
vr0 at pci0 dev 9 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:0d:b9:1a:7e:cc
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1 at pci0 dev 11 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr1: interrupting at irq 15
vr1: Ethernet address: 00:0d:b9:1a:7e:cd
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x168c product 0x0029 (miscellaneous network, revision 0x01) at pci0 dev 12 function 0 not configured
gcscpcib0 at pci0 dev 15 function 0
gcscpcib0: vendor 0x1022 product 0x2090 (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: Watchdog Timer via MFGPT0, GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 15 function 2
viaide0: Advanced Micro Devices CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
ohci0 at pci0 dev 15 function 4: vendor 0x1022 product 0x2094 (rev. 0x02)
ohci0: interrupting at irq 12
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
gcscehci0 at pci0 dev 15 function 5: vendor 0x1022 product 0x2095 (rev. 0x02)
gcscehci0: interrupting at irq 12
gcscehci0: EHCI version 1.0
gcscehci0: companion controller, 4 ports each: ohci0
usb1 at gcscehci0: USB revision 2.0
isa0 at gcscpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2: console
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 0x1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0: <>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs