Welche Bedeutung haben folgende CDrom Fehlermeldungen beim booten...?

M

marcus

Active Member
Hallo nochmal,

habe heute versucht, die User auf meinem Rechner zu befähigen, CDs zu mounten.
vfs.usermount=1 in die sysctl
chmod 666 /dev/acd0
chmod 666 /dev/acd1
chmod 666 /dev/acd2

Dann habe ich die Verzeichnisse beim User erstellt und deren Rechte auf rw gesetzt.
Trotzdem durfte ich als User nichts mounten ("permission denied")
Ich habe zwar hinbekommen, daß alle User mounten können (mit chmod 4555 /sbin/mount etc), aber erstens ist das wohl keine sehr elegante Lösung und zweitens habe ich jetzt Booltmeldungen, die mich irritieren:

here we go:

Oct 2 20:03:19 10 kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Oct 2 20:03:19 10 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 2 20:03:19 10 kernel: The Regents of the University of California. All rights reserved.
Oct 2 20:03:19 10 kernel: FreeBSD 5.2.1-RELEASE #0: Wed Sep 29 21:27:55 CEST 2004
Oct 2 20:03:19 10 kernel: root@10.90.90.2:/usr/src/sys/i386/compile/MARCUS1
Oct 2 20:03:19 10 kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2f000.
Oct 2 20:03:19 10 kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2f26c.
Oct 2 20:03:19 10 kernel: ACPI APIC Table: <AMIINT SiS740XX>
Oct 2 20:03:19 10 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Oct 2 20:03:19 10 kernel: CPU: AMD Athlon(tm) XP 2600+ (2083.10-MHz 686-class CPU)
Oct 2 20:03:19 10 kernel: Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Oct 2 20:03:19 10 kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Oct 2 20:03:19 10 kernel: AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Oct 2 20:03:19 10 kernel: real memory = 1073676288 (1023 MB)
Oct 2 20:03:19 10 kernel: avail memory = 1033510912 (985 MB)
Oct 2 20:03:19 10 kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Oct 2 20:03:19 10 kernel: Pentium Pro MTRR support enabled
Oct 2 20:03:19 10 kernel: npx0: [FAST]
Oct 2 20:03:19 10 kernel: npx0: <math processor> on motherboard
Oct 2 20:03:19 10 kernel: npx0: INT 16 interface
Oct 2 20:03:19 10 kernel: acpi0: <AMIINT SiS740XX> on motherboard
Oct 2 20:03:19 10 kernel: pcibios: BIOS version 2.10
Oct 2 20:03:19 10 kernel: Using $PIR table, 10 entries at 0xc00f7e60
Oct 2 20:03:19 10 kernel: acpi0: Power Button (fixed)
Oct 2 20:03:19 10 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Oct 2 20:03:19 10 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Oct 2 20:03:19 10 kernel: acpi_cpu0: <CPU> on acpi0
Oct 2 20:03:19 10 kernel: acpi_button0: <Power Button> on acpi0
Oct 2 20:03:19 10 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Oct 2 20:03:19 10 kernel: pci0: <ACPI PCI bus> on pcib0
Oct 2 20:03:19 10 kernel: agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
Oct 2 20:03:19 10 kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0
Oct 2 20:03:19 10 kernel: pci1: <PCI bus> on pcib1
Oct 2 20:03:19 10 kernel: pcib1: slot 0 INTA is routed to irq 16
Oct 2 20:03:19 10 kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Oct 2 20:03:19 10 kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0
Oct 2 20:03:19 10 kernel: isa0: <ISA bus> on isab0
Oct 2 20:03:19 10 kernel: atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0
Oct 2 20:03:19 10 kernel: ata0: at 0x1f0 irq 14 on atapci0
Oct 2 20:03:19 10 kernel: ata0: [MPSAFE]
Oct 2 20:03:19 10 kernel: ata1: at 0x170 irq 15 on atapci0
Oct 2 20:03:19 10 kernel: ata1: [MPSAFE]
Oct 2 20:03:19 10 kernel: sis0: <SiS 900 10/100BaseTX> port 0xdc00-0xdcff mem 0xcffff000-0xcfffffff irq 19 at device 4.0 on pci0
Oct 2 20:03:19 10 kernel: sis0: Ethernet address: 00:00:00:00:00:00
Oct 2 20:03:19 10 kernel: miibus0: <MII bus> on sis0
Oct 2 20:03:19 10 kernel: rlphy0: <RTL8201L 10/100 media interface> on miibus0
Oct 2 20:03:19 10 kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 2 20:03:19 10 kernel: pci0: <network> at device 10.0 (no driver attached)
Oct 2 20:03:19 10 kernel: pci0: <multimedia, audio> at device 11.0 (no driver attached)
Oct 2 20:03:19 10 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Oct 2 20:03:19 10 kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Oct 2 20:03:19 10 kernel: kbd0 at atkbd0
Oct 2 20:03:19 10 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Oct 2 20:03:19 10 kernel: psm0: model MouseMan+, device ID 0
Oct 2 20:03:19 10 kernel: fdc0: cmd 3 failed at out byte 1 of 3
Oct 2 20:03:19 10 kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Oct 2 20:03:19 10 kernel: sio0: type 16550A
Oct 2 20:03:19 10 kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 0 on acpi0
Oct 2 20:03:19 10 kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Oct 2 20:03:19 10 kernel: ppc0: FIFO with 16/16/9 bytes threshold
Oct 2 20:03:19 10 kernel: ppbus0: <Parallel port bus> on ppc0
Oct 2 20:03:19 10 kernel: plip0: <PLIP network interface> on ppbus0
Oct 2 20:03:19 10 kernel: lpt0: <Printer> on ppbus0
Oct 2 20:03:19 10 kernel: lpt0: Interrupt-driven port
Oct 2 20:03:19 10 kernel: ppi0: <Parallel I/O> on ppbus0
Oct 2 20:03:19 10 kernel: fdc0: cmd 3 failed at out byte 1 of 3
Oct 2 20:03:19 10 kernel: orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
Oct 2 20:03:19 10 kernel: pmtimer0 on isa0
Oct 2 20:03:19 10 kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
Oct 2 20:03:19 10 kernel: fdc0: FIFO enabled, 8 bytes threshold
Oct 2 20:03:19 10 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Oct 2 20:03:19 10 kernel: sc0: <System console> at flags 0x100 on isa0
Oct 2 20:03:19 10 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 2 20:03:19 10 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Oct 2 20:03:19 10 kernel: sio1: port may not be enabled
Oct 2 20:03:19 10 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 2 20:03:19 10 kernel: Timecounter "TSC" frequency 2083101615 Hz quality 800
Oct 2 20:03:19 10 kernel: Timecounters tick every 10.000 msec
Oct 2 20:03:19 10 kernel: GEOM: create disk ad0 dp=0xc6b57e60
Oct 2 20:03:19 10 kernel: ad0: 114473MB <ST3120022A> [232581/16/63] at ata0-master UDMA100
Oct 2 20:03:19 10 kernel: acd0: CDRW <RICOH CD-R/RW MP7040A> at ata0-slave PIO4
Oct 2 20:03:19 10 kernel: acd1: DVDROM <IDE DVD-ROM 16X> at ata1-master PIO4
Oct 2 20:03:19 10 kernel: acd2: CDRW <CD-W54E> at ata1-slave PIO4
Oct 2 20:03:19 10 kernel: GEOM: create disk cd0 dp=0xc6978600
Oct 2 20:03:19 10 kernel: GEOM: create disk cd1 dp=0xc6979600
Oct 2 20:03:19 10 kernel: GEOM: create disk cd2 dp=0xc697b600
Oct 2 20:03:19 10 kernel: cd1 at ata1 bus 0 target 0 lun 0
Oct 2 20:03:19 10 kernel: cd1: <IDE DVD-ROM 16X 2.50> Removable CD-ROM SCSI-0 device
Oct 2 20:03:19 10 kernel: cd1: 16.000MB/s transfers
Oct 2 20:03:19 10 kernel: cd1: cd present [330956 x 2352 byte records]
Oct 2 20:03:19 10 kernel: cd0 at ata0 bus 0 target 1 lun 0
Oct 2 20:03:19 10 kernel: cd0: <RICOH CD-R/RW MP7040A 1.40> Removable CD-ROM SCSI-0 device
Oct 2 20:03:19 10 kernel: cd0: 16.000MB/s transfers
Oct 2 20:03:19 10 kernel: cd0: cd present [58621 x 2048 byte records]
Oct 2 20:03:19 10 kernel: cd2 at ata1 bus 0 target 1 lun 0
Oct 2 20:03:19 10 kernel: cd2: <TEAC CD-W54E 1.1B> Removable CD-ROM SCSI-0 device
------------------------------------------------------------------------------------------------------------------------------> hier wartet der Rechner länger
Oct 2 20:03:19 10 kernel: cd2: 16.000MB/s transfers
Oct 2 20:03:19 10 kernel: cd2: Attempt to query device size failed: NOT READY, Medium not present
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): CAM Status: SCSI Status Error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): SCSI Status: Check Condition
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Illegal mode for this track
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Unretryable error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): cddone: got error 0x6 back
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): CAM Status: SCSI Status Error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): SCSI Status: Check Condition
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Illegal mode for this track
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Unretryable error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): cddone: got error 0x6 back
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): CAM Status: SCSI Status Error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): SCSI Status: Check Condition
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Illegal mode for this track
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): Unretryable error
Oct 2 20:03:19 10 kernel: (cd1:ata1:0:0:0): cddone: got error 0x6 back
--------------------------------------------------------------------------------------------------------------------------------------hier enden die verdächtigen (und neuen Fehlermeldungen
Oct 2 20:03:19 10 kernel: Mounting root from ufs:/dev/ad0s2a


Kann mir jemand sagen, was ich da wieder angerichtet habe und wie ich es korrigiert bekomme?

Vielen Dankl!

ciao

-Marcus
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben