# wsconsctl als root im terminal aus. Das gibt alle verfuegbaren Optionen aus. Vermutlich nennt sich dein Touchpad anders.$ cat /etc/X11/xorg.conf.d/synaptics.conf
Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "Device" "/dev/wsmouse0"
#Option "ClickPad" "1"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "PalmDetect" "1"
Option "TapAndDragGesture" "0"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "0"
Option "VertScrollDelta" "-26"
Option "HorizScrollDelta" "-26"
Option "MinSpeed" "1"
Option "MaxSpeed" "1"
Option "AccelFactor" "0.0573888"
EndSection wsconsctl -a | grep mouse
wsconsctl: Use explicit arg to view keyboard.map.
wsconsctl: Use explicit arg to view keyboard1.map.
mouse.type=touchpad
mouse.rawmode=1
mouse.scale=0,0,0,0,0,0,0
mouse.reverse_scrolling=0
mouse.scaling=1.000
mouse1.type=ps2
mouse1.reverse_scrolling=0
mouse1.scaling=1.000
mouse2.type=usb
mouse2.reverse_scrolling=0
mouse2.scaling=1.000dmesg
OpenBSD 7.7 (GENERIC.MP) #625: Sun Apr 13 08:30:20 MDT 2025
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8191778816 (7812MB)
avail mem = 7917047808 (7550MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xeb6e0 (106 entries)
bios0: vendor Dell Inc. version "1.41.3" date 02/09/2025
bios0: Dell Inc. Latitude 7280
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT HPET SSDT UEFI SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT MSDM SLIC TCPA BGRT DMAR ASF!
acpi0: wakeup devices RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2294.66 MHz, 06-4e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2294.66 MHz, 06-4e-03, patch 000000f0
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2294.66 MHz, 06-4e-03, patch 000000f0
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2294.66 MHz, 06-4e-03, patch 000000f0
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus 2 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0
acpiec at acpi0 not configured
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"DLLK079F" at acpi0 not configured
"DLL079f" at acpi0 not configured
"INT3446" at acpi0 not configured
"INT3403" at acpi0 not configured
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, WEC WPCT200 rev 0x4
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0(wakeup)
acpibtn1 at acpi0: PBTN(wakeup)
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL KG7VF1A" serial 1541 type LiP oem "BYD"
acpihid0 at acpi0: HIDD, 5 button array
"INT3400" at acpi0 not configured
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpitz0 at acpi0
acpitz0: critical temperature is 107 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2294 MHz: speeds: 2401, 2400, 2300, 2200, 2000, 1900, 1700, 1600, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic 2 int 16
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic 2 int 17
iic1 at dwiic1
ihidev0 at iic1 addr 0x2c irq 51, vendor 0x44e product 0x120b, DLL079f
ihidev0: 7 report ids
ims0 at ihidev0 reportid 1: 3 buttons, Z and W dir
wsmouse0 at ims0 mux 0
ikbd0 at ihidev0 reportid 2: 8 variable keys, 6 key codes
wskbd0 at ikbd0 mux 1
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 5 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 7 not configured
dwiic2 at pci0 dev 21 function 2 "Intel 100 Series I2C" rev 0x21: apic 2 int 18
iic2 at dwiic2
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: ports: 16 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, INTEL SSDSCKJF24, LT2i> naa.55cd2e414c80c282
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC256, Intel/0x2809, using Realtek ALC256
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic3 at ichiic0
spdmem0 at iic3 addr 0x50: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address a4:4c:c8:27:df:cf
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd1 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse1 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "CNFGH19N282051002152 Integrated_Webcam_HD" rev 2.00/68.25 addr 3
video0 at uvideo0
ugen0 at uhub0 port 10 "Broadcom Corp 5880" rev 1.10/1.01 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 228936MB, 512 bytes/sector, 468861536 sectors
root on sd1a (d57f58eb66675c13.a) swap on sd1b dump on sd1b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address cc:2f:71:5f:ac:44wsmouse2 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
# wsconsctl mouse.tapping=1,3,2
# wsconsctl mouse.reverse_scrolling=1FN+F9 oder aehnliches aktivieren? Kann dein Touchpad denn ueberhaupt multitouch und tapping? Ich habs nicht explizit aktiviert, aber bei mir wird das so angezeigt:$ doas wsconsctl -a | grep mouse
mouse.type=touchpad
mouse.rawmode=0
mouse.scale=0,3060,0,1669,0,31,31
mouse.reverse_scrolling=0
mouse.tp.tapping=0,0,0
mouse.tp.swapsides=0
mouse.tp.disable=1
mouse.tp.edges=0.0,5.0,10.0,5.0
mouse.scaling=0.264
mouse1.type=touchpad
mouse1.rawmode=1
mouse1.scale=0,0,0,0,0,0,0
mouse1.reverse_scrolling=0
mouse1.scaling=1.000
mouse2.type=touch-panel
mouse2.rawmode=1
mouse2.scale=0,3060,0,1669,0,0,0
mouse2.reverse_scrolling=0
mouse2.scaling=1.000
mouse3.type=ps2
mouse3.reverse_scrolling=0
mouse3.scaling=1.000ich kann mit 2 Finger scrollen und tapping ist eingeschaltet, was ja mein Problem ist (nervt!).
wsconsctl mouse.reverse_scrolling=1# wsconsctl mouse.tapping=1,3,2
wsconsctl: mouse.tapping: not foundKlickfunktion und Tapping sind zwei gegensaetzliche Funktionen. Vermutlich reden wir aneinander vorbei. Es gibt das Clickpad, hier wird die Maus betaetigt, indem man das Touchpad runterdrueckt und es gibt das Tapping, hier wird die Maus betaetigt, indem man das Touchpad nur mit einem, zwei oder drei Finger antippt. :-)
$ cat /etc/X11/xorg.conf.d/synaptics.conf
Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "Device" "/dev/wsmouse0"
Option "ClickPad" "1"
Option "PalmDetect" "1"
Option "TapAndDragGesture" "0"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "0"
Option "VertScrollDelta" "-26"
Option "HorizScrollDelta" "-26"
Option "MinSpeed" "1"
Option "MaxSpeed" "1"
Option "AccelFactor" "0.0573888"
EndSection$ cat /etc/X11/xorg.conf.d/synaptics.conf
Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "Device" "/dev/wsmouse0"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "PalmDetect" "1"
Option "TapAndDragGesture" "0"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "0"
Option "VertScrollDelta" "-26"
Option "HorizScrollDelta" "-26"
Option "MinSpeed" "1"
Option "MaxSpeed" "1"
Option "AccelFactor" "0.0573888"
EndSectiontapping ist./etc/X11/xorg.conf.d/synaptics.conf existiert bei mir nicht. Also einfach anlegen, deine Einstellungen rein kopieren und Neustart?
Ja genau. Einfach
doas mkdir -p /etc/X11/xorg.conf.d und dann dort eine synaptics.conf anlegen. Neustarten musst Du nicht. Es reicht, wenn Du einmal ausloggst und wieder einloggst (X11 neustartest). Was Du willst, ist das Clickpad. Ich mag Tapping auch nicht und nutze das Touchpad auch nur als Clickpad.
$ xinput im terminal eingeben.$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ /dev/wsmouse0 id=7 [slave pointer (2)]
⎜ ↳ /dev/wsmouse id=8 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ /dev/wskbd id=6 [slave keyboard (3)]/dev/wsmouse0 ist bei mir das Touchpad mit der id=7. $ xinput --list-props 7 (mit der id=7) zeigt bei mir folgendes an, wenn Synaptics funktioniert:$ xinput --list-props 7
Device '/dev/wsmouse0':
Device Enabled (183): 1
Coordinate Transformation Matrix (184): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (302): 1
Device Accel Constant Deceleration (303): 1.000000
Device Accel Adaptive Deceleration (304): 1.000000
Device Accel Velocity Scaling (305): 12.500000
Synaptics Edges (306): 122, 2938, 90, 1579
Synaptics Finger (307): 1, 1, 0
Synaptics Tap Time (308): 180
Synaptics Tap Move (309): 153
Synaptics Tap Durations (310): 180, 180, 100
Synaptics ClickPad (311): 1
Synaptics Middle Button Timeout (312): 0
Synaptics Two-Finger Pressure (313): 282
Synaptics Two-Finger Width (314): 7
Synaptics Scrolling Distance (315): -26, -26
Synaptics Edge Scrolling (316): 0, 0, 0
Synaptics Two-Finger Scrolling (317): 1, 0
Synaptics Move Speed (318): 1.000000, 1.000000, 0.057389, 0.000000
Synaptics Off (319): 0
Synaptics Locked Drags (320): 0
Synaptics Locked Drags Timeout (321): 5000
Synaptics Tap Action (322): 0, 0, 0, 0, 0, 0, 0
Synaptics Click Action (323): 1, 1, 1
Synaptics Circular Scrolling (324): 0
Synaptics Circular Scrolling Distance (325): 0.100000
Synaptics Circular Scrolling Trigger (326): 0
Synaptics Circular Pad (327): 0
Synaptics Palm Detection (328): 1
Synaptics Palm Dimensions (329): 10, 200
Synaptics Coasting Speed (330): 20.000000, 50.000000
Synaptics Pressure Motion (331): 30, 160
Synaptics Pressure Motion Factor (332): 1.000000, 1.000000
Synaptics Grab Event Device (333): 0
Synaptics Gestures (334): 0
Synaptics Capabilities (335): 1, 1, 1, 1, 1, 1, 1
Synaptics Pad Resolution (336): 31, 31
Synaptics Area (337): 0, 0, 0, 0
Synaptics Soft Button Areas (338): 0, 0, 0, 0, 0, 0, 0, 0
Synaptics Noise Cancellation (339): 17, 17
Device Node (340): "/dev/wsmouse0"synaptics.conf gelöscht. synapticsscheint der falsche Treiber zu sein. Nach Neustart funktioniert wenigstens das Touchpad wieder. Die /etc/wsconsctl.conf habe ich ebenso gelöscht.xinput: xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ /dev/wsmouse0 id=7 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ /dev/wskbd id=6 [slave keyboard (3)]
dellbsd$ xinput --list-props 7
Device '/dev/wsmouse0':
Device Enabled (183): 1
Coordinate Transformation Matrix (184): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (302): 0
Device Accel Constant Deceleration (303): 1.000000
Device Accel Adaptive Deceleration (304): 1.000000
Device Accel Velocity Scaling (305): 10.000000
WS Pointer Middle Button Emulation (306): 2
WS Pointer Middle Button Timeout (307): 50
WS Pointer Wheel Emulation (308): 0
WS Pointer Wheel Emulation Axes (309): 0, 0, 4, 5
WS Pointer Wheel Emulation Inertia (310): 10
WS Pointer Wheel Emulation Timeout (311): 200
WS Pointer Wheel Emulation Button (312): 4genau das hat gleich zu Anfang nichts gebracht. Synaptics schaltet mir das Touchpad ab, irgendwas schaltet mir die USB-Mouse aus und
tappinglässt sich nicht ausschalten. Hm ...
ich hab auf dem Gerät lxqt als DE. Da kann ich nichts konfigurieren. Aber ich kann ja mal xfce installieren. Vllt. mal wieder den Holzhammer nehmen
und neu installieren. Mich beunruhigt am meisten, dass die usb-mouse nicht mehr reagiert, obwohl dmesgexakt den gleichen Output liefert, wie auf dem t420. Auf Konsole (STRG-ALT-F1) reagiert die usb-mouse wieder.immer noch nicht. Kein Lebenszeichen. Ich habe lediglich versuch
mouse.tp.tapping und mouse.reverse_scrolling zu ändern und dafür die /etc/wsconsctl.conf angelegt. Nach einem Neustart reagierte die usb-mouse nicht mehr./var/log/Xorg.0.log folgendes gefunden:[ 14.758] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 14.797] (II) config/wscons: checking input device /dev/wsmouse0
[ 14.797] (II) LoadModule: "ws"
[ 14.798] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 14.799] (II) Module ws: vendor="X.Org Foundation"
[ 14.799] compiled for 1.21.1.16, module version = 1.3.0
[ 14.799] Module class: X.Org XInput Driver
[ 14.799] ABI class: X.Org XInput driver, version 24.4
[ 14.799] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 14.799] (**) /dev/wsmouse0: always reports core events
[ 14.799] (II) ws: /dev/wsmouse0: debuglevel 0
[ 14.799] (**) Option "Device" "/dev/wsmouse0"
[ 14.799] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 14.799] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 14.799] (**) ws: /dev/wsmouse0: associated screen: 0
[ 14.799] (II) ws: /dev/wsmouse0: minimum x position: 0
[ 14.799] (II) ws: /dev/wsmouse0: maximum x position: 1919
[ 14.799] (II) ws: /dev/wsmouse0: minimum y position: 0
[ 14.799] (II) ws: /dev/wsmouse0: maximum y position: 1079
[ 14.799] (==) ws: /dev/wsmouse0: Buttons: 7
[ 14.799] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 14.799] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: MOUSE, id 7)
[ 14.800] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 14.800] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 14.800] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 14.800] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 14.802] (II) config/wscons: checking input device /dev/wsmouse
[ 14.802] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 14.802] (**) /dev/wsmouse: always reports core events
[ 14.802] (II) ws: /dev/wsmouse: debuglevel 0
[ 14.802] (**) Option "Device" "/dev/wsmouse"
[ 14.802] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 14.802] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 14.802] (**) ws: /dev/wsmouse: associated screen: 0
[ 14.802] (EE) xf86OpenSerial: Cannot open device /dev/wsmouse
Device busy.
[ 14.802] (EE) ws: /dev/wsmouse: cannot open input device
[ 14.802] (EE) PreInit returned 2 for "/dev/wsmouse"
[ 14.802] (II) UnloadModule: "ws"So was in der Art habe ich auch schon vermutet. Z.B. hierdurch:
# wsconsctl mouse.tapping=1,3,2
wsconsctl: mouse.tapping: not found# wsconsctl mouse.tp.tapping=1,3,2Ja, es ist schon sehr mehrkwuerdig, dass bei dir kein
mouse.tp.tapping vorhanden ist. Evtl. wird dein Touchpad nicht zu 100% unterstuetzt oder es teilt sich den Bus mit einem anderen device und wird daher nicht korrekt zugeordnet. Nutzt Du denn das Touchpad oder willst Du das komplett deaktivieren? Falls ja, kannst Du das vermutlich im Bios komplett deaktivieren.Also das Teil ist mehr oder weniger mein Reise-Laptop. Deswegen ist Touchpad schon wichtig. Das Ding kriegst du in jeden Rucksack gepackt und wiegt wenig. Die Akkulaufzeit ist auch super. Mit USB-Mouse im rappelvollen Zug rum hantieren ...