Keamas
Active Member
Hi ich habe 2 Probleme mit meinem FreeBSD allerdings vermute ich das die irgendwie miteinander zusammenhängen.
1. Probelem ich kann meine Bildschirmauflösung nicht höher als 1024 x 768 stellen sonst crasht meine X immer wenn ich startx starten will
2. Problen Wenn BSD starte [default] bleibt er beim Booten hängen mit der folgenden Meldung:
wenn ich allerdings 2. Boot FreeBSD with ACPI disabled auswähle klappt das Booten
XF86Config
1. Probelem ich kann meine Bildschirmauflösung nicht höher als 1024 x 768 stellen sonst crasht meine X immer wenn ich startx starten will
2. Problen Wenn BSD starte [default] bleibt er beim Booten hängen mit der folgenden Meldung:
Code:
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consols, flag = 0x300>
vga0: <Generic ISA VGA> at port 0x300-0x3df iomem 0xxa0000- 0xbffff 0n isa0
Timecounter "TSC" frequency 1243347122H2 gality 800
Timecounters tick every 10.000 msec
wenn ich allerdings 2. Boot FreeBSD with ACPI disabled auswähle klappt das Booten
XF86Config
Code:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
#DisplaySize 360 270 # mm
Identifier "Monitor0"
VendorName "FUS"
ModelName "C900"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon R300 AD [Radeon 9500 Pro]"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
Zuletzt bearbeitet: