8.0 RC3: ELF interpreter /libexec/ld-elf.so.1 not found

A

AB-stromer

Well-Known Member
Moin,

habe gerade auf dem AMD64 System FreeBSD 7.2-BETA2 per CD/sysinstall auf 8.0-RC3 gebracht. Der Upgade des Basisystems scheint soweit geklappt zu haben, es bootet in 8.0-RC3, aber danach geht fast nix mehr: bei fast allem, was ich versuche, kommt:
ELF interpreter /libexec/ld-elf.so.1 not found
Abort trap

da keinerlei portupgrade mehr geht, sieht es nach Neuinstallation aus

Oder hat vielleicht jemand einen Tip?
 
Sieht aus, als seien aus irgend einem Grund Kernel und Basissystem asynchron. Da wäre das Einfachste schlicht noch ein einmal das Update durchlaufen zu lassen. Wenn gar nichts anderes mehr geht, von einer Live-CD aus per make buildworld. Es wäre der Holzhammer, sollte aber das System pflicken.
 
Hallo,

ein zumindest sehr ähnliches Problem hatte ich auch: http://www.bsdforen.de/showthread.php?t=23548.

Hier lag es daran, dass der nforce-Chipsatz beim Schreiben und Lesen gerne Daten vernichtete.

Bei mir war es speziell so, dass die Kiste dann beim Booten nach dem Starten des Kernels (Farbwechsel der Schrift beim Booten) mit zufaelligen Fehlern dieser Art auf die Nase flog.
Das Laden des Kernels selbst über BIOS-Funktionen funktionierte noch.
 
nun, nachdem
a) eine Neuinstallation von 8.0 RC3 von CD zwar für das Basissystem ging, aber jede Installation von Packages via FTP scheiterte (konnten geladen aber nicht installiert werden) und
b) eine erneute Neuinstallation danach von einem kompletten DVD Medium auch wieder zwar für das Basissystem ging, aber jede Installation von Packages mit
"Add of package xcb-proto-1.5 aborted, error code 1"
usw abbricht,

habe ich erstmal jeden weiteren Versuch mit 8.0 aufgegeben. Zumindest für AMD64 ist das 8.0 noch unbrauchbar. Gut, dass das nur ein Testsystem war...

Nun arbeite ich seit ein paar Jahren schon mit FreeBSD, aber noch kaum ein Update oder noch weniger Upgrade hat mal wirklich rund geklappt! Irgendwas war immer. Das musste ich einfach mal loswerden... ;)

Werde jetzt erstmal mit 7.2 auf dem Produktivsystem weiterarbeiten, (sowie mit Ubuntu und Debian Linux, da sind die Update/Upgradeverfahren nämlich traumhaft stabil.) und warte mal ein Reifen von 8.x ab.
 
Hallo,

das liegt nicht an AMD64 und das ist sicherlich kein Problem, was mit FreeBSD 8.0 RC zusammenhängt.

Nenne bitte mal Deine Hardware, ich denke mal, dass es dort ein Treiberproblem gibt.
 
Moin AB-stromer,

AB-stromer schrieb:
nun, nachdem
a) eine Neuinstallation von 8.0 RC3 von CD zwar für das Basissystem ging, aber jede Installation von Packages via FTP scheiterte (konnten geladen aber nicht installiert werden) und
b) eine erneute Neuinstallation danach von einem kompletten DVD Medium auch wieder zwar für das Basissystem ging, aber jede Installation von Packages mit
"Add of package xcb-proto-1.5 aborted, error code 1"
usw abbricht,[...]
Zum Vergrößern anklicken....
In so einem Fall hat es bei mir immer geholfen, wenn man zumindest für die Installation des Betriebssytems, den DMA-Modus sowohl für die Festplatte als auch für das optische Laufwerk abschaltet.

Für den laufenden Betrieb, kannst Du den Modus wieder aktivieren. Aber ansonsten gilt das, was rMarkus schon geschrieben hat.

Viele Grüße

JueDan
 
Hallo juedan!

juedan schrieb:
Moin AB-stromer,


In so einem Fall hat es bei mir immer geholfen, wenn man zumindest für die Installation des Betriebssytems, den DMA-Modus sowohl für die Festplatte als auch für das optische Laufwerk abschaltet.

Für den laufenden Betrieb, kannst Du den Modus wieder aktivieren. Aber ansonsten gilt das, was rMarkus schon geschrieben hat.

Viele Grüße

JueDan
Zum Vergrößern anklicken....


tja, keinerlei geändertes Verhalten auf diesem Wege....

BTW, bei mir kann man nur DMA Gesamt abschalten, nicht separat für HD und CD/DVD

viele Grüße
AB-stromer
 
Hallo rMarkus,

rMarkus schrieb:
Hallo,

das liegt nicht an AMD64 und das ist sicherlich kein Problem, was mit FreeBSD 8.0 RC zusammenhängt.

Nenne bitte mal Deine Hardware, ich denke mal, dass es dort ein Treiberproblem gibt.
Zum Vergrößern anklicken....

hier bitteschön:

Code: 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-1-vserver-amd64 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 20:19:13 UTC 2009
[    0.000000] Command line: root=/dev/sda1 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 229088) 1 entries of 3200 used
[    0.000000] max_pfn_mapped = 1048576
[    0.000000] init_memory_mapping
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000F8170, 0024 (r2 ATI   )
[    0.000000] ACPI: XSDT 37EE3100, 004C (r1 ATI    ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 37EE8440, 00F4 (r3 ATI    ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 37EE3280, 515A (r1 ATI    ASUSACPI     1000 MSFT  3000000)
[    0.000000] ACPI: FACS 37EE0000, 0040
[    0.000000] ACPI: SSDT 37EE8680, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: HPET 37EE8900, 0038 (r1 ATI    ASUSACPI 42302E31 AWRD       98)
[    0.000000] ACPI: MCFG 37EE8980, 003C (r1 ATI    ASUSACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 37EE8580, 0084 (r1 ATI    ASUSACPI 42302E31 AWRD        0)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000037ee0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 229088) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000037ee0000
[    0.000000]   NODE_DATA [000000000000b000 - 000000000000ffff]
[    0.000000]   bootmap [0000000000010000 -  0000000000016fdf] pages 7
[    0.000000]   early res: 0 [0-fff] BIOS data page
[    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
[    0.000000]   early res: 2 [200000-6c54b7] TEXT DATA BSS
[    0.000000]   early res: 3 [3786c000-37ecf0cd] RAMDISK
[    0.000000]   early res: 4 [9f000-fffff] BIOS reserved
[    0.000000]   early res: 5 [8000-afff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   229088
[    0.000000] On node 0 totalpages: 228991
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1326 pages reserved
[    0.000000]   DMA zone: 2617 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3077 pages used for memmap
[    0.000000]   DMA32 zone: 221915 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 37f00000:a8100000)
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 37552 bytes of per cpu data
[    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 224532
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda1 ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.000000] time.c: Detected 2199.919 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] Node 0: aperture @ 2240000000 size 32 MB
[    0.004000] Aperture beyond 4GB. Ignoring.
[    0.004000] No AGP bridge found
[    0.004000] Memory: 889868k/916352k available (2464k kernel code, 26096k reserved, 1140k data, 396k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.084007] Calibrating delay using timer specific routine.. 4403.58 BogoMIPS (lpj=8807173)
[    0.084063] Security Framework initialized
[    0.084069] SELinux:  Disabled at boot.
[    0.084073] Capability LSM initialized
[    0.084195] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.085027] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.085415] Mount-cache hash table entries: 256
[    0.085609] Initializing cgroup subsys ns
[    0.085612] Initializing cgroup subsys cpuacct
[    0.085615] Initializing cgroup subsys devices
[    0.085640] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.085642] CPU: L2 Cache: 512K (64 bytes/line)
[    0.085644] CPU 0/0 -> Node 0
[    0.085658] CPU: Physical Processor ID: 0
[    0.085660] CPU: Processor Core ID: 0
[    0.086388] ACPI: Core revision 20080321
[    0.140008] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[    0.140008] Using local APIC timer interrupts.
[    0.144009] APIC timer calibration result 12499558
[    0.144009] Detected 12.499 MHz APIC timer.
[    0.144009] Booting processor 1/1 ip 6000
[    0.152009] Initializing CPU#1
[    0.152009] Calibrating delay using timer specific routine.. 4399.94 BogoMIPS (lpj=8799884)
[    0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.152009] CPU: L2 Cache: 512K (64 bytes/line)
[    0.152009] CPU 1/1 -> Node 0
[    0.152009] CPU: Physical Processor ID: 0
[    0.152009] CPU: Processor Core ID: 1
[    0.231968] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[    0.231980] Brought up 2 CPUs
[    0.231982] Total of 2 processors activated (8803.52 BogoMIPS).
[    0.232014] CPU0 attaching sched-domain:
[    0.232014]  domain 0: span 0-1
[    0.232014]   groups: 0 1
[    0.232014]   domain 1: span 0-1
[    0.232014]    groups: 0-1
[    0.232014] CPU1 attaching sched-domain:
[    0.232014]  domain 0: span 0-1
[    0.232014]   groups: 1 0
[    0.232014]   domain 1: span 0-1
[    0.232014]    groups: 0-1
[    0.232014] net_namespace: 1224 bytes
[    0.232014] Booting paravirtualized kernel on bare hardware
[    0.232014] NET: Registered protocol family 16
[    0.232014] node 0 link 0: io port [c000, ffff]
[    0.232014] TOM: 0000000040000000 aka 1024M
[    0.232014] node 0 link 0: mmio [a0000, bffff]
[    0.232014] node 0 link 0: mmio [40000000, dfffffff]
[    0.232014] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.232014] node 0 link 0: mmio [e0000000, e03fffff]
[    0.232014] bus: [00,03] on node 0 link 0
[    0.232014] bus: 00 index 0 io port: [0, ffff]
[    0.232014] bus: 00 index 1 mmio: [a0000, bffff]
[    0.232014] bus: 00 index 2 mmio: [40000000, efffffff]
[    0.232014] bus: 00 index 3 mmio: [f0000000, fcffffffff]
[    0.232014] ACPI: bus type pci registered
[    0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.232014] PCI: MCFG area at e0000000 reserved in E820
[    0.246930] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.246933] PCI: Using configuration type 1 for base access
[    0.248015] ACPI: EC: Look up EC in DSDT
[    0.257546] ACPI: Interpreter enabled
[    0.257548] ACPI: (supports S0 S1 S3 S4 S5)
[    0.257566] ACPI: Using IOAPIC for interrupt routing
[    0.262570] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.262570] pci 0000:00:12.0: set SATA to AHCI mode
[    0.262570] PCI: Transparent bridge - 0000:00:14.4
[    0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[    0.262676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.290571] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
[    0.290571] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.290571] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.290571] pnp: PnP ACPI init
[    0.290571] ACPI: bus type pnp registered
[    0.290571] pnp 00:00: parse allocated resources
[    0.290571] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
[    0.290571] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.290571] pnp 00:01: parse allocated resources
[    0.290571] pnp 00:01:   add io  0x4100-0x411f flags 0x1
[    0.290571] pnp 00:01:   add io  0x228-0x22f flags 0x1
[    0.290571] pnp 00:01:   add io  0x40b-0x40b flags 0x1
[    0.290571] pnp 00:01:   add io  0x4d6-0x4d6 flags 0x1
[    0.290571] pnp 00:01:   add io  0xc00-0xc01 flags 0x1
[    0.290571] pnp 00:01:   add io  0xc14-0xc14 flags 0x1
[    0.290571] pnp 00:01:   add io  0xc50-0xc52 flags 0x1
[    0.290571] pnp 00:01:   add io  0xc6c-0xc6d flags 0x1
[    0.290571] pnp 00:01:   add io  0xc6f-0xc6f flags 0x1
[    0.290571] pnp 00:01:   add io  0xcd0-0xcd1 flags 0x1
[    0.290571] pnp 00:01:   add io  0xcd2-0xcd3 flags 0x1
[    0.290571] pnp 00:01:   add io  0xcd4-0xcdf flags 0x1
[    0.290571] pnp 00:01:   add io  0x4000-0x40fe flags 0x1
[    0.290571] pnp 00:01:   add io  0x4210-0x4217 flags 0x1
[    0.290571] pnp 00:01:   add io  0xb10-0xb1f flags 0x1
[    0.290571] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.290571] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290831] pnp 00:02: parse allocated resources
[    0.290837] pnp 00:02:   add dma 4 flags 0x4
[    0.290839] pnp 00:02:   add io  0x0-0xf flags 0x1
[    0.290842] pnp 00:02:   add io  0x80-0x90 flags 0x1
[    0.290844] pnp 00:02:   add io  0x94-0x9f flags 0x1
[    0.290845] pnp 00:02:   add io  0xc0-0xdf flags 0x1
[    0.291182] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.291239] pnp 00:03: parse allocated resources
[    0.291293] pnp 00:03:   add irq 8 flags 0x1
[    0.291296] pnp 00:03:   add mem 0xfed00000-0xfed003ff flags 0x1
[    0.291621] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.291635] pnp 00:04: parse allocated resources
[    0.291682] pnp 00:04:   add io  0x70-0x73 flags 0x1
[    0.292004] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.292020] pnp 00:05: parse allocated resources
[    0.292026] pnp 00:05:   add io  0x61-0x61 flags 0x1
[    0.292350] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.292365] pnp 00:06: parse allocated resources
[    0.292370] pnp 00:06:   add io  0xf0-0xff flags 0x1
[    0.292378] pnp 00:06:   add irq 13 flags 0x1
[    0.292705] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.292751] pnp 00:07: parse allocated resources
[    0.292758] pnp 00:07:   add io  0x10-0x1f flags 0x1
[    0.292760] pnp 00:07:   add io  0x22-0x3f flags 0x1
[    0.292762] pnp 00:07:   add io  0x44-0x5f flags 0x1
[    0.292764] pnp 00:07:   add io  0x62-0x63 flags 0x1
[    0.292766] pnp 00:07:   add io  0x65-0x6f flags 0x1
[    0.292768] pnp 00:07:   add io  0x74-0x7f flags 0x1
[    0.292770] pnp 00:07:   add io  0x91-0x93 flags 0x1
[    0.292772] pnp 00:07:   add io  0xa2-0xbf flags 0x1
[    0.292774] pnp 00:07:   add io  0xe0-0xef flags 0x1
[    0.292776] pnp 00:07:   add io  0x4d0-0x4d1 flags 0x1
[    0.292778] pnp 00:07:   add io  0x220-0x225 flags 0x1
[    0.292781] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.293139] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293451] pnp 00:08: parse allocated resources
[    0.293688] pnp 00:08:   add io  0x3f8-0x3ff flags 0x1
[    0.293695] pnp 00:08:   add irq 4 flags 0x1
[    0.293697] pnp 00:08: parse resource options
[    0.293700] pnp 00:08: new independent option
[    0.293707] pnp 00:08: new dependent option (priority 0x1)
[    0.293710] pnp 00:08:   io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[    0.293715] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.293717] pnp 00:08: new dependent option (priority 0x1)
[    0.293720] pnp 00:08:   io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[    0.293724] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.293727] pnp 00:08: new dependent option (priority 0x1)
[    0.293729] pnp 00:08:   io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[    0.293734] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.293737] pnp 00:08: new dependent option (priority 0x1)
[    0.293739] pnp 00:08:   io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[    0.293743] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.293745] pnp 00:08: end dependent options
[    0.294073] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.294419] pnp 00:09: parse allocated resources
[    0.294572] pnp 00:09:   add io  0x378-0x37f flags 0x1
[    0.294572] pnp 00:09:   add irq 7 flags 0x1
[    0.294572] pnp 00:09: parse resource options
[    0.294572] pnp 00:09: new independent option
[    0.294572] pnp 00:09: new dependent option (priority 0x1)
[    0.294572] pnp 00:09:   io  min 0x378 max 0x378 align 1 size 8 flags 0x1
[    0.294572] pnp 00:09:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.294572] pnp 00:09: new dependent option (priority 0x1)
[    0.294572] pnp 00:09:   io  min 0x278 max 0x278 align 1 size 8 flags 0x1
[    0.294572] pnp 00:09:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.294572] pnp 00:09: new dependent option (priority 0x1)
[    0.294572] pnp 00:09:   io  min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[    0.294572] pnp 00:09:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.294572] pnp 00:09: end dependent options
[    0.294572] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.294572] pnp 00:0a: parse allocated resources
[    0.294572] pnp 00:0a:   add irq 12 flags 0x1
[    0.294572] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.294572] pnp 00:0b: parse allocated resources
[    0.294572] pnp 00:0b:   add io  0x60-0x60 flags 0x1
[    0.294572] pnp 00:0b:   add io  0x64-0x64 flags 0x1
[    0.294572] pnp 00:0b:   add irq 1 flags 0x1
[    0.294572] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.294572] pnp 00:0c: parse allocated resources
[    0.294572] pnp 00:0c:   add mem 0xe0000000-0xefffffff flags 0x1
[    0.294572] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.294572] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294572] pnp 00:0d: parse allocated resources
[    0.294572] pnp 00:0d:   add mem 0xcd600-0xcffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xf0000-0xf7fff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xf8000-0xfbfff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xfc000-0xfffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0x37ef0000-0x37feffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xfed00000-0xfed000ff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0x37ee0000-0x37efffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xffff0000-0xffffffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0x0-0x9ffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0x100000-0x37edffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0x37ff0000-0x3ffeffff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xfec00000-0xfec00fff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xfee00000-0xfee00fff flags 0x1
[    0.294572] pnp 00:0d:   add mem 0xfff80000-0xfffeffff flags 0x1
[    0.294572] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[    0.294572] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.294572] pnp: PnP ACPI: found 14 devices
[    0.294572] ACPI: ACPI bus type pnp unregistered
[    0.294572] usbcore: registered new interface driver usbfs
[    0.294572] usbcore: registered new interface driver hub
[    0.294572] usbcore: registered new device driver usb
[    0.294572] PCI: Using ACPI for IRQ routing
[    0.322573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.322573] hpet0: 4 32-bit timers, 14318180 Hz
[    0.322573] ACPI: RTC can wake from S4
[    0.325406] Switched to high resolution mode on CPU 0
[    0.326726] Switched to high resolution mode on CPU 1
[    0.333380] pnp: the driver 'system' has been registered
[    0.333393] system 00:01: ioport range 0x4100-0x411f has been reserved
[    0.333396] system 00:01: ioport range 0x228-0x22f has been reserved
[    0.333399] system 00:01: ioport range 0x40b-0x40b has been reserved
[    0.333402] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[    0.333404] system 00:01: ioport range 0xc00-0xc01 has been reserved
[    0.333407] system 00:01: ioport range 0xc14-0xc14 has been reserved
[    0.333410] system 00:01: ioport range 0xc50-0xc52 has been reserved
[    0.333413] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[    0.333415] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[    0.333418] system 00:01: ioport range 0xcd0-0xcd1 has been reserved
[    0.333421] system 00:01: ioport range 0xcd2-0xcd3 has been reserved
[    0.333423] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[    0.333426] system 00:01: ioport range 0x4000-0x40fe has been reserved
[    0.333429] system 00:01: ioport range 0x4210-0x4217 has been reserved
[    0.333431] system 00:01: ioport range 0xb10-0xb1f has been reserved
[    0.333436] system 00:01: driver attached
[    0.333445] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.333447] system 00:07: ioport range 0x220-0x225 has been reserved
[    0.333451] system 00:07: driver attached
[    0.333460] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[    0.333463] system 00:0c: driver attached
[    0.333470] system 00:0d: iomem range 0xcd600-0xcffff has been reserved
[    0.333473] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[    0.333476] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[    0.333479] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[    0.333482] system 00:0d: iomem range 0x37ef0000-0x37feffff could not be reserved
[    0.333485] system 00:0d: iomem range 0xfed00000-0xfed000ff could not be reserved
[    0.333487] system 00:0d: iomem range 0x37ee0000-0x37efffff could not be reserved
[    0.333490] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.333493] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.333496] system 00:0d: iomem range 0x100000-0x37edffff could not be reserved
[    0.333499] system 00:0d: iomem range 0x37ff0000-0x3ffeffff has been reserved
[    0.333502] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.333505] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.333507] system 00:0d: iomem range 0xfff80000-0xfffeffff could not be reserved
[    0.333510] system 00:0d: driver attached
[    0.335060] PCI: Bridge: 0000:00:01.0
[    0.335060]   IO window: d000-dfff
[    0.335060]   MEM window: 0xfda00000-0xfdbfffff
[    0.335060]   PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[    0.335060] PCI: Bridge: 0000:00:07.0
[    0.335060]   IO window: e000-efff
[    0.335060]   MEM window: 0xfdf00000-0xfdffffff
[    0.335060]   PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[    0.335060] PCI: Bridge: 0000:00:14.4
[    0.335060]   IO window: c000-cfff
[    0.335060]   MEM window: 0xfde00000-0xfdefffff
[    0.335060]   PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
[    0.335060] PCI: Setting latency timer of device 0000:00:07.0 to 64
[    0.335060] NET: Registered protocol family 2
[    0.370925] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.374816] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.374816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.374816] TCP: Hash tables configured (established 131072 bind 65536)
[    0.374816] TCP reno registered
[    0.382974] NET: Registered protocol family 1
[    0.383089] checking if image is initramfs... it is
[    0.830815] Freeing initrd memory: 6540k freed
[    0.834820] audit: initializing netlink socket (disabled)
[    0.834820] type=2000 audit(1258395414.824:1): initialized
[    0.834821] Total HugeTLB memory allocated, 0
[    0.834821] VFS: Disk quotas dquot_6.5.1
[    0.834821] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.834821] msgmni has been set to 1750
[    0.834821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.834821] io scheduler noop registered
[    0.834821] io scheduler anticipatory registered
[    0.834821] io scheduler deadline registered
[    0.834821] io scheduler cfq registered (default)
[    1.043570] pci 0000:01:05.0: Boot video device
[    1.043570] PCI: Setting latency timer of device 0000:00:07.0 to 64
[    1.043570] assign_interrupt_mode Found MSI capability
[    1.043570] Allocate Port Service[0000:00:07.0:pcie00]
[    1.043570] Allocate Port Service[0000:00:07.0:pcie03]
[    1.043570] hpet_resources: 0xfed00000 is busy
[    1.043570] Linux agpgart interface v0.103
[    1.043570] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.043570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.043570] pnp: the driver 'serial' has been registered
[    1.043570] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.043570] serial 00:08: driver attached
[    1.043570] brd: module loaded
[    1.043570] vroot: loaded (max 8 devices)
[    1.043570] input: Macintosh mouse button emulation as /class/input/input0
[    1.043570] pnp: the driver 'i8042 kbd' has been registered
[    1.043570] i8042 kbd 00:0b: driver attached
[    1.051264] pnp: the driver 'i8042 aux' has been registered
[    1.051264] i8042 aux 00:0a: driver attached
[    1.051264] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.051351] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.051351] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.077422] mice: PS/2 mouse device common for all mice
[    1.077422] pnp: the driver 'rtc_cmos' has been registered
[    1.077422] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.077422] rtc0: alarms up to one month
[    1.077422] rtc_cmos 00:04: driver attached
[    1.077422] cpuidle: using governor ladder
[    1.077422] cpuidle: using governor menu
[    1.077422] No iBFT detected.
[    1.077903] TCP cubic registered
[    1.077903] NET: Registered protocol family 10
[    1.077903] lo: Disabled Privacy Extensions
[    1.077903] Mobile IPv6
[    1.077903] NET: Registered protocol family 17
[    1.077903] registered taskstats version 1
[    1.077903] rtc_cmos 00:04: setting system clock to 2009-11-16 18:16:56 UTC (1258395416)
[    1.077903] Freeing unused kernel memory: 396k freed
[    1.098364] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.169161] ACPI: PNP0C0B:00 is registered as cooling_device0
[    1.169161] ACPI: Fan [FAN] (on)
[    1.173247] ACPI: ACPI0007:00 is registered as cooling_device1
[    1.173247] ACPI: ACPI0007:01 is registered as cooling_device2
[    1.176823] ACPI: Expecting a [Reference] package element, found type 0
[    1.177245] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.177245] ACPI: Thermal Zone [THRM] (40 C)
[    1.578957] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[    1.578995] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    1.579014] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    1.580149] eth0: RTL8168b/8111b at 0xffffc200001dc000, 00:1e:8c:83:b8:9e, XID 38000000 IRQ 1278
[    1.581582] No dock devices found.
[    1.597580] SCSI subsystem initialized
[    1.613656] libata version 3.00 loaded.
[    1.617585] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.617585] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.617585] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.617585] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[    1.617585] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[    1.653581] Uniform Multi-Platform E-IDE driver
[    1.653581] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.681450] usb usb1: configuration #1 chosen from 1 choice
[    1.681450] hub 1-0:1.0: USB hub found
[    1.681450] hub 1-0:1.0: 2 ports detected
[    1.782652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.782656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.782658] usb usb1: Product: OHCI Host Controller
[    1.782661] usb usb1: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[    1.782663] usb usb1: SerialNumber: 0000:00:13.0
[    1.783729] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[    1.783750] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.783804] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[    1.783832] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[    1.843556] usb usb2: configuration #1 chosen from 1 choice
[    1.843595] hub 2-0:1.0: USB hub found
[    1.843607] hub 2-0:1.0: 2 ports detected
[    1.951063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.951065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.951068] usb usb2: Product: OHCI Host Controller
[    1.951070] usb usb2: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[    1.951071] usb usb2: SerialNumber: 0000:00:13.1
[    1.953085] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[    1.953085] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.953085] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    1.953085] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[    2.047644] usb usb3: configuration #1 chosen from 1 choice
[    2.047644] hub 3-0:1.0: USB hub found
[    2.047644] hub 3-0:1.0: 2 ports detected
[    2.149092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.149094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.149096] usb usb3: Product: OHCI Host Controller
[    2.149098] usb usb3: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[    2.149100] usb usb3: SerialNumber: 0000:00:13.2
[    2.152582] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[    2.152582] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    2.152582] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[    2.152582] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[    2.252582] usb usb4: configuration #1 chosen from 1 choice
[    2.252582] hub 4-0:1.0: USB hub found
[    2.252582] hub 4-0:1.0: 2 ports detected
[    2.352682] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.352685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.352687] usb usb4: Product: OHCI Host Controller
[    2.352689] usb usb4: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[    2.352691] usb usb4: SerialNumber: 0000:00:13.3
[    2.352691] ahci 0000:00:12.0: version 3.0
[    2.352691] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[    2.352691] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    3.956740] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    3.956743] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
[    3.960690] scsi0 : ahci
[    3.960690] scsi1 : ahci
[    3.960690] scsi2 : ahci
[    3.960690] scsi3 : ahci
[    3.960690] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    3.960690] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    3.960690] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    3.960690] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    4.446813] ata1: softreset failed (device not ready)
[    4.446850] ata1: failed due to HW bug, retry pmp=0
[    4.610678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.611539] ata1.00: ATA-7: ExcelStor Technology J8160S, P22OAB3A, max UDMA/133
[    4.611542] ata1.00: 321672960 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    4.611551] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    4.612576] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    4.612579] ata1.00: configured for UDMA/133
[    5.066153] ata2: SATA link down (SStatus 0 SControl 300)
[    5.910541] ata3: SATA link down (SStatus 0 SControl 300)
[    6.246543] ata4: SATA link down (SStatus 0 SControl 300)
[    6.474606] isa bounce pool size: 16 pages
[    6.474606] scsi 0:0:0:0: Direct-Access     ATA      ExcelStor Techno P22O PQ: 0 ANSI: 5
[    6.474606] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[    6.474606] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    6.474606] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[    6.474606] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[    6.571110] usb usb5: configuration #1 chosen from 1 choice
[    6.571110] hub 5-0:1.0: USB hub found
[    6.571110] hub 5-0:1.0: 2 ports detected
[    6.682333] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    6.682335] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.682338] usb usb5: Product: OHCI Host Controller
[    6.682340] usb usb5: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[    6.682342] usb usb5: SerialNumber: 0000:00:13.4
[    6.682333] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[    6.682333] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    6.682333] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[    6.682333] ehci_hcd 0000:00:13.5: debug port 1
[    6.682333] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[    6.742350] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.742423] usb usb6: configuration #1 chosen from 1 choice
[    6.742454] hub 6-0:1.0: USB hub found
[    6.742464] hub 6-0:1.0: 10 ports detected
[    6.842430] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    6.842433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.842435] usb usb6: Product: EHCI Host Controller
[    6.842437] usb usb6: Manufacturer: Linux 2.6.26-1-vserver-amd64 ehci_hcd
[    6.842439] usb usb6: SerialNumber: 0000:00:13.5
[    6.846332] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at  PCI slot 0000:00:14.1
[    6.846332] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[    6.846332] SB600_PATA: not 100% native mode: will probe irqs later
[    6.846332]     ide0: BM-DMA at 0xf900-0xf907
[    6.846332] Probing IDE interface ide0...
[    6.898930] Driver 'sd' needs updating - please use bus_type methods
[    6.898930] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[    6.898930] sd 0:0:0:0: [sda] Write Protect is off
[    6.898930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.898930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.898930] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[    6.898930] sd 0:0:0:0: [sda] Write Protect is off
[    6.898930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.898930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.898930]  sda: sda1 sda2 < sda5 > sda3
[    6.947060]  sda3: <bsd: sda6 sda7 sda8 sda9 sda10 sda11 >
[    6.947356] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.614572] hda: HL-DT-ST DVD-ROM GDR-H30N, ATAPI CD/DVD-ROM drive
[    7.894569] hdb: IBM-DTTA-351010, ATA DISK drive
[    7.950284] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    7.950554] hda: UDMA/33 mode selected
[    7.950952] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    7.951315] hdb: UDMA/33 mode selected
[    7.951704] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.990226] hda: ATAPI 52X DVD-ROM drive, 198kB Cache
[    7.990226] Uniform CD-ROM driver Revision: 3.20
[    7.994230] hdb: max request size: 128KiB
[    7.998231] hdb: 19807200 sectors (10141 MB) w/466KiB Cache, CHS=19650/16/63
[    7.998231] hdb: cache flushes not supported
[    7.998231]  hdb:
[    8.215416] PM: Starting manual resume from disk
[    8.282636] kjournald starting.  Commit interval 5 seconds
[    8.282636] EXT3-fs: mounted filesystem with ordered data mode.
[    9.589534] udevd version 125 started
[   10.380556] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.382085] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.680513] input: Power Button (FF) as /class/input/input2
[   10.732948] ACPI: Power Button (FF) [PWRF]
[   10.732948] input: Power Button (CM) as /class/input/input3
[   10.785593] ACPI: Power Button (CM) [PWRB]
[   10.931197] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   11.031753] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[   11.048613] input: PC Speaker as /class/input/input4
[   11.797139] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[   11.861033] pnp: the driver 'parport_pc' has been registered
[   11.861033] parport_pc 00:09: reported by Plug and Play ACPI
[   11.861033] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   11.958099] parport_pc 00:09: driver attached
[   12.869199] Adding 2626588k swap on /dev/sda5.  Priority:-1 extents:1 across:2626588k
[   13.146306] EXT3 FS on sda1, internal journal
[   13.892337] loop: module loaded
[   15.013621] r8169: eth0: link up
[   15.013621] r8169: eth0: link up
[   15.981805] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[   15.982352] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xa
[   15.982352] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xc
[   15.982352] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xe
[   15.982352] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[   17.500903] lp0: using parport0 (interrupt-driven).
[   17.524697] ppdev: user-space parallel port driver
[   17.838197] Clocksource tsc unstable (delta = -102202823 ns)
[   19.829253] RPC: Registered udp transport module.
[   19.829253] RPC: Registered tcp transport module.
[   19.938547] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.029566] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   20.041542] NFSD: starting 90-second grace period
[   24.534715] NET: Registered protocol family 5
[   38.693313] eth0: no IPv6 routers present


viele Grüße
AB-stromer
 
Nun arbeite ich seit ein paar Jahren schon mit FreeBSD, aber noch kaum ein Update oder noch weniger Upgrade hat mal wirklich rund geklappt! Irgendwas war immer.
Zum Vergrößern anklicken....
In den letzten Wochen hatte ich mehere Installationen von Ubuntu und auch Updates von 9.04 zu 9.10 durchgeführt: das geht alles grafisch un vollkommen einfach und Paket-orientiert und ist demnach als wirklich Enduser-Ready zu bezeichnen.
Als ich mit FreeBSD anfing, war ein Grund genau der, dass ich damals nie einen sauberen Update einer GNU/Linux-Distribution hinbekommen hatte, während es bei FreeBSD auf Anhieb funktionierte.
Den PC, den ich aktuell nutze, das ist ein AMD64 und seit einer 6er Installation ist er nur upgedatet worden und nicht neu aufgesetzt und es läuft dort ein Desktop System mit KDE3 und vielen Multimedia Dingen. Es ist nicht so, dass es immer problemlos geht und manchmal war ich auch kurz vorm Aufgeben, allermeist lagen die Probleme aber in forschem Voranschreiten meinerseits und mangelhafter Lektüre der Update-Empfehlungen, etwa der UPDATING. Also, seit freebsd-update und mit den bsdadminscripts komme ich da recht gut klar und kann von mir aus dafür FreeBSD nur loben. Derzeit läuft mein PC mit 8.0-RC3 und Probleme habe ich nicht im Betrieb, aber es gibt ein paar Dinge, etwa automatisches Einbinden von USB-Laufwerken in diversen Dateiformaten mittels Hal, was ich mir noch ansehen müsste (das ich aber auch nicht wirklich vermisse) und womit ich jedenfalls auf die Release warte.
Nebenbei: Desktop-BSD hatte früher mal ein gutes Update-System und ich glaube auch, PC-BSD und wenn mit Linux-Distributionen verglichen wird, kann man nicht direkt FreeBSD nehmen. Das passt ja nicht nicht so ganz, FreeBSD hat ja gar nicht vergleichbare Ziele, wie etwa die Enduser-Tauglichkeit.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben