[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-vserver-amd64 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 20:19:13 UTC 2009
[ 0.000000] Command line: root=/dev/sda1 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable)
[ 0.000000] BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229088) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F8170, 0024 (r2 ATI )
[ 0.000000] ACPI: XSDT 37EE3100, 004C (r1 ATI ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 37EE8440, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 37EE3280, 515A (r1 ATI ASUSACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 37EE0000, 0040
[ 0.000000] ACPI: SSDT 37EE8680, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET 37EE8900, 0038 (r1 ATI ASUSACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 37EE8980, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 37EE8580, 0084 (r1 ATI ASUSACPI 42302E31 AWRD 0)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000037ee0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229088) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ee0000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000016fdf] pages 7
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-6c54b7] TEXT DATA BSS
[ 0.000000] early res: 3 [3786c000-37ecf0cd] RAMDISK
[ 0.000000] early res: 4 [9f000-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 229088
[ 0.000000] On node 0 totalpages: 228991
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1326 pages reserved
[ 0.000000] DMA zone: 2617 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3077 pages used for memmap
[ 0.000000] DMA32 zone: 221915 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 37f00000:a8100000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37552 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 224532
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2199.919 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 2240000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 889868k/916352k available (2464k kernel code, 26096k reserved, 1140k data, 396k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.084007] Calibrating delay using timer specific routine.. 4403.58 BogoMIPS (lpj=8807173)
[ 0.084063] Security Framework initialized
[ 0.084069] SELinux: Disabled at boot.
[ 0.084073] Capability LSM initialized
[ 0.084195] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.085027] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.085415] Mount-cache hash table entries: 256
[ 0.085609] Initializing cgroup subsys ns
[ 0.085612] Initializing cgroup subsys cpuacct
[ 0.085615] Initializing cgroup subsys devices
[ 0.085640] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.085642] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.085644] CPU 0/0 -> Node 0
[ 0.085658] CPU: Physical Processor ID: 0
[ 0.085660] CPU: Processor Core ID: 0
[ 0.086388] ACPI: Core revision 20080321
[ 0.140008] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.140008] Using local APIC timer interrupts.
[ 0.144009] APIC timer calibration result 12499558
[ 0.144009] Detected 12.499 MHz APIC timer.
[ 0.144009] Booting processor 1/1 ip 6000
[ 0.152009] Initializing CPU#1
[ 0.152009] Calibrating delay using timer specific routine.. 4399.94 BogoMIPS (lpj=8799884)
[ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.152009] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.152009] CPU 1/1 -> Node 0
[ 0.152009] CPU: Physical Processor ID: 0
[ 0.152009] CPU: Processor Core ID: 1
[ 0.231968] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.231980] Brought up 2 CPUs
[ 0.231982] Total of 2 processors activated (8803.52 BogoMIPS).
[ 0.232014] CPU0 attaching sched-domain:
[ 0.232014] domain 0: span 0-1
[ 0.232014] groups: 0 1
[ 0.232014] domain 1: span 0-1
[ 0.232014] groups: 0-1
[ 0.232014] CPU1 attaching sched-domain:
[ 0.232014] domain 0: span 0-1
[ 0.232014] groups: 1 0
[ 0.232014] domain 1: span 0-1
[ 0.232014] groups: 0-1
[ 0.232014] net_namespace: 1224 bytes
[ 0.232014] Booting paravirtualized kernel on bare hardware
[ 0.232014] NET: Registered protocol family 16
[ 0.232014] node 0 link 0: io port [c000, ffff]
[ 0.232014] TOM: 0000000040000000 aka 1024M
[ 0.232014] node 0 link 0: mmio [a0000, bffff]
[ 0.232014] node 0 link 0: mmio [40000000, dfffffff]
[ 0.232014] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.232014] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.232014] bus: [00,03] on node 0 link 0
[ 0.232014] bus: 00 index 0 io port: [0, ffff]
[ 0.232014] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.232014] bus: 00 index 2 mmio: [40000000, efffffff]
[ 0.232014] bus: 00 index 3 mmio: [f0000000, fcffffffff]
[ 0.232014] ACPI: bus type pci registered
[ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.232014] PCI: MCFG area at e0000000 reserved in E820
[ 0.246930] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.246933] PCI: Using configuration type 1 for base access
[ 0.248015] ACPI: EC: Look up EC in DSDT
[ 0.257546] ACPI: Interpreter enabled
[ 0.257548] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.257566] ACPI: Using IOAPIC for interrupt routing
[ 0.262570] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.262570] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.262570] PCI: Transparent bridge - 0000:00:14.4
[ 0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.262570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.262676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.290571] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
[ 0.290571] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.290571] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.290571] pnp: PnP ACPI init
[ 0.290571] ACPI: bus type pnp registered
[ 0.290571] pnp 00:00: parse allocated resources
[ 0.290571] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.290571] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.290571] pnp 00:01: parse allocated resources
[ 0.290571] pnp 00:01: add io 0x4100-0x411f flags 0x1
[ 0.290571] pnp 00:01: add io 0x228-0x22f flags 0x1
[ 0.290571] pnp 00:01: add io 0x40b-0x40b flags 0x1
[ 0.290571] pnp 00:01: add io 0x4d6-0x4d6 flags 0x1
[ 0.290571] pnp 00:01: add io 0xc00-0xc01 flags 0x1
[ 0.290571] pnp 00:01: add io 0xc14-0xc14 flags 0x1
[ 0.290571] pnp 00:01: add io 0xc50-0xc52 flags 0x1
[ 0.290571] pnp 00:01: add io 0xc6c-0xc6d flags 0x1
[ 0.290571] pnp 00:01: add io 0xc6f-0xc6f flags 0x1
[ 0.290571] pnp 00:01: add io 0xcd0-0xcd1 flags 0x1
[ 0.290571] pnp 00:01: add io 0xcd2-0xcd3 flags 0x1
[ 0.290571] pnp 00:01: add io 0xcd4-0xcdf flags 0x1
[ 0.290571] pnp 00:01: add io 0x4000-0x40fe flags 0x1
[ 0.290571] pnp 00:01: add io 0x4210-0x4217 flags 0x1
[ 0.290571] pnp 00:01: add io 0xb10-0xb1f flags 0x1
[ 0.290571] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.290571] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290831] pnp 00:02: parse allocated resources
[ 0.290837] pnp 00:02: add dma 4 flags 0x4
[ 0.290839] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.290842] pnp 00:02: add io 0x80-0x90 flags 0x1
[ 0.290844] pnp 00:02: add io 0x94-0x9f flags 0x1
[ 0.290845] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.291182] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.291239] pnp 00:03: parse allocated resources
[ 0.291293] pnp 00:03: add irq 8 flags 0x1
[ 0.291296] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x1
[ 0.291621] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.291635] pnp 00:04: parse allocated resources
[ 0.291682] pnp 00:04: add io 0x70-0x73 flags 0x1
[ 0.292004] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.292020] pnp 00:05: parse allocated resources
[ 0.292026] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.292350] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.292365] pnp 00:06: parse allocated resources
[ 0.292370] pnp 00:06: add io 0xf0-0xff flags 0x1
[ 0.292378] pnp 00:06: add irq 13 flags 0x1
[ 0.292705] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.292751] pnp 00:07: parse allocated resources
[ 0.292758] pnp 00:07: add io 0x10-0x1f flags 0x1
[ 0.292760] pnp 00:07: add io 0x22-0x3f flags 0x1
[ 0.292762] pnp 00:07: add io 0x44-0x5f flags 0x1
[ 0.292764] pnp 00:07: add io 0x62-0x63 flags 0x1
[ 0.292766] pnp 00:07: add io 0x65-0x6f flags 0x1
[ 0.292768] pnp 00:07: add io 0x74-0x7f flags 0x1
[ 0.292770] pnp 00:07: add io 0x91-0x93 flags 0x1
[ 0.292772] pnp 00:07: add io 0xa2-0xbf flags 0x1
[ 0.292774] pnp 00:07: add io 0xe0-0xef flags 0x1
[ 0.292776] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1
[ 0.292778] pnp 00:07: add io 0x220-0x225 flags 0x1
[ 0.292781] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.293139] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293451] pnp 00:08: parse allocated resources
[ 0.293688] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
[ 0.293695] pnp 00:08: add irq 4 flags 0x1
[ 0.293697] pnp 00:08: parse resource options
[ 0.293700] pnp 00:08: new independent option
[ 0.293707] pnp 00:08: new dependent option (priority 0x1)
[ 0.293710] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.293715] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.293717] pnp 00:08: new dependent option (priority 0x1)
[ 0.293720] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.293724] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.293727] pnp 00:08: new dependent option (priority 0x1)
[ 0.293729] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.293734] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.293737] pnp 00:08: new dependent option (priority 0x1)
[ 0.293739] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.293743] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.293745] pnp 00:08: end dependent options
[ 0.294073] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.294419] pnp 00:09: parse allocated resources
[ 0.294572] pnp 00:09: add io 0x378-0x37f flags 0x1
[ 0.294572] pnp 00:09: add irq 7 flags 0x1
[ 0.294572] pnp 00:09: parse resource options
[ 0.294572] pnp 00:09: new independent option
[ 0.294572] pnp 00:09: new dependent option (priority 0x1)
[ 0.294572] pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.294572] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294572] pnp 00:09: new dependent option (priority 0x1)
[ 0.294572] pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1
[ 0.294572] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294572] pnp 00:09: new dependent option (priority 0x1)
[ 0.294572] pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[ 0.294572] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294572] pnp 00:09: end dependent options
[ 0.294572] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.294572] pnp 00:0a: parse allocated resources
[ 0.294572] pnp 00:0a: add irq 12 flags 0x1
[ 0.294572] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.294572] pnp 00:0b: parse allocated resources
[ 0.294572] pnp 00:0b: add io 0x60-0x60 flags 0x1
[ 0.294572] pnp 00:0b: add io 0x64-0x64 flags 0x1
[ 0.294572] pnp 00:0b: add irq 1 flags 0x1
[ 0.294572] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.294572] pnp 00:0c: parse allocated resources
[ 0.294572] pnp 00:0c: add mem 0xe0000000-0xefffffff flags 0x1
[ 0.294572] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294572] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294572] pnp 00:0d: parse allocated resources
[ 0.294572] pnp 00:0d: add mem 0xcd600-0xcffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xf0000-0xf7fff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xf8000-0xfbfff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xfc000-0xfffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0x37ef0000-0x37feffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xfed00000-0xfed000ff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0x37ee0000-0x37efffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xffff0000-0xffffffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0x100000-0x37edffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0x37ff0000-0x3ffeffff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.294572] pnp 00:0d: add mem 0xfff80000-0xfffeffff flags 0x1
[ 0.294572] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294572] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.294572] pnp: PnP ACPI: found 14 devices
[ 0.294572] ACPI: ACPI bus type pnp unregistered
[ 0.294572] usbcore: registered new interface driver usbfs
[ 0.294572] usbcore: registered new interface driver hub
[ 0.294572] usbcore: registered new device driver usb
[ 0.294572] PCI: Using ACPI for IRQ routing
[ 0.322573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.322573] hpet0: 4 32-bit timers, 14318180 Hz
[ 0.322573] ACPI: RTC can wake from S4
[ 0.325406] Switched to high resolution mode on CPU 0
[ 0.326726] Switched to high resolution mode on CPU 1
[ 0.333380] pnp: the driver 'system' has been registered
[ 0.333393] system 00:01: ioport range 0x4100-0x411f has been reserved
[ 0.333396] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.333399] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.333402] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.333404] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.333407] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.333410] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.333413] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.333415] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.333418] system 00:01: ioport range 0xcd0-0xcd1 has been reserved
[ 0.333421] system 00:01: ioport range 0xcd2-0xcd3 has been reserved
[ 0.333423] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.333426] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.333429] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.333431] system 00:01: ioport range 0xb10-0xb1f has been reserved
[ 0.333436] system 00:01: driver attached
[ 0.333445] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.333447] system 00:07: ioport range 0x220-0x225 has been reserved
[ 0.333451] system 00:07: driver attached
[ 0.333460] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.333463] system 00:0c: driver attached
[ 0.333470] system 00:0d: iomem range 0xcd600-0xcffff has been reserved
[ 0.333473] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.333476] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.333479] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.333482] system 00:0d: iomem range 0x37ef0000-0x37feffff could not be reserved
[ 0.333485] system 00:0d: iomem range 0xfed00000-0xfed000ff could not be reserved
[ 0.333487] system 00:0d: iomem range 0x37ee0000-0x37efffff could not be reserved
[ 0.333490] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.333493] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.333496] system 00:0d: iomem range 0x100000-0x37edffff could not be reserved
[ 0.333499] system 00:0d: iomem range 0x37ff0000-0x3ffeffff has been reserved
[ 0.333502] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.333505] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.333507] system 00:0d: iomem range 0xfff80000-0xfffeffff could not be reserved
[ 0.333510] system 00:0d: driver attached
[ 0.335060] PCI: Bridge: 0000:00:01.0
[ 0.335060] IO window: d000-dfff
[ 0.335060] MEM window: 0xfda00000-0xfdbfffff
[ 0.335060] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.335060] PCI: Bridge: 0000:00:07.0
[ 0.335060] IO window: e000-efff
[ 0.335060] MEM window: 0xfdf00000-0xfdffffff
[ 0.335060] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[ 0.335060] PCI: Bridge: 0000:00:14.4
[ 0.335060] IO window: c000-cfff
[ 0.335060] MEM window: 0xfde00000-0xfdefffff
[ 0.335060] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
[ 0.335060] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.335060] NET: Registered protocol family 2
[ 0.370925] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.374816] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.374816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.374816] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.374816] TCP reno registered
[ 0.382974] NET: Registered protocol family 1
[ 0.383089] checking if image is initramfs... it is
[ 0.830815] Freeing initrd memory: 6540k freed
[ 0.834820] audit: initializing netlink socket (disabled)
[ 0.834820] type=2000 audit(1258395414.824:1): initialized
[ 0.834821] Total HugeTLB memory allocated, 0
[ 0.834821] VFS: Disk quotas dquot_6.5.1
[ 0.834821] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.834821] msgmni has been set to 1750
[ 0.834821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.834821] io scheduler noop registered
[ 0.834821] io scheduler anticipatory registered
[ 0.834821] io scheduler deadline registered
[ 0.834821] io scheduler cfq registered (default)
[ 1.043570] pci 0000:01:05.0: Boot video device
[ 1.043570] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.043570] assign_interrupt_mode Found MSI capability
[ 1.043570] Allocate Port Service[0000:00:07.0:pcie00]
[ 1.043570] Allocate Port Service[0000:00:07.0:pcie03]
[ 1.043570] hpet_resources: 0xfed00000 is busy
[ 1.043570] Linux agpgart interface v0.103
[ 1.043570] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.043570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.043570] pnp: the driver 'serial' has been registered
[ 1.043570] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.043570] serial 00:08: driver attached
[ 1.043570] brd: module loaded
[ 1.043570] vroot: loaded (max 8 devices)
[ 1.043570] input: Macintosh mouse button emulation as /class/input/input0
[ 1.043570] pnp: the driver 'i8042 kbd' has been registered
[ 1.043570] i8042 kbd 00:0b: driver attached
[ 1.051264] pnp: the driver 'i8042 aux' has been registered
[ 1.051264] i8042 aux 00:0a: driver attached
[ 1.051264] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.051351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.051351] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.077422] mice: PS/2 mouse device common for all mice
[ 1.077422] pnp: the driver 'rtc_cmos' has been registered
[ 1.077422] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.077422] rtc0: alarms up to one month
[ 1.077422] rtc_cmos 00:04: driver attached
[ 1.077422] cpuidle: using governor ladder
[ 1.077422] cpuidle: using governor menu
[ 1.077422] No iBFT detected.
[ 1.077903] TCP cubic registered
[ 1.077903] NET: Registered protocol family 10
[ 1.077903] lo: Disabled Privacy Extensions
[ 1.077903] Mobile IPv6
[ 1.077903] NET: Registered protocol family 17
[ 1.077903] registered taskstats version 1
[ 1.077903] rtc_cmos 00:04: setting system clock to 2009-11-16 18:16:56 UTC (1258395416)
[ 1.077903] Freeing unused kernel memory: 396k freed
[ 1.098364] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.169161] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.169161] ACPI: Fan [FAN] (on)
[ 1.173247] ACPI: ACPI0007:00 is registered as cooling_device1
[ 1.173247] ACPI: ACPI0007:01 is registered as cooling_device2
[ 1.176823] ACPI: Expecting a [Reference] package element, found type 0
[ 1.177245] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.177245] ACPI: Thermal Zone [THRM] (40 C)
[ 1.578957] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.578995] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.579014] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.580149] eth0: RTL8168b/8111b at 0xffffc200001dc000, 00:1e:8c:83:b8:9e, XID 38000000 IRQ 1278
[ 1.581582] No dock devices found.
[ 1.597580] SCSI subsystem initialized
[ 1.613656] libata version 3.00 loaded.
[ 1.617585] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.617585] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.617585] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.617585] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 1.617585] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.653581] Uniform Multi-Platform E-IDE driver
[ 1.653581] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.681450] usb usb1: configuration #1 chosen from 1 choice
[ 1.681450] hub 1-0:1.0: USB hub found
[ 1.681450] hub 1-0:1.0: 2 ports detected
[ 1.782652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.782656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.782658] usb usb1: Product: OHCI Host Controller
[ 1.782661] usb usb1: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[ 1.782663] usb usb1: SerialNumber: 0000:00:13.0
[ 1.783729] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.783750] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.783804] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 1.783832] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.843556] usb usb2: configuration #1 chosen from 1 choice
[ 1.843595] hub 2-0:1.0: USB hub found
[ 1.843607] hub 2-0:1.0: 2 ports detected
[ 1.951063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.951065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.951068] usb usb2: Product: OHCI Host Controller
[ 1.951070] usb usb2: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[ 1.951071] usb usb2: SerialNumber: 0000:00:13.1
[ 1.953085] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.953085] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.953085] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 1.953085] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 2.047644] usb usb3: configuration #1 chosen from 1 choice
[ 2.047644] hub 3-0:1.0: USB hub found
[ 2.047644] hub 3-0:1.0: 2 ports detected
[ 2.149092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.149094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.149096] usb usb3: Product: OHCI Host Controller
[ 2.149098] usb usb3: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[ 2.149100] usb usb3: SerialNumber: 0000:00:13.2
[ 2.152582] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.152582] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 2.152582] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 2.152582] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 2.252582] usb usb4: configuration #1 chosen from 1 choice
[ 2.252582] hub 4-0:1.0: USB hub found
[ 2.252582] hub 4-0:1.0: 2 ports detected
[ 2.352682] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.352685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.352687] usb usb4: Product: OHCI Host Controller
[ 2.352689] usb usb4: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[ 2.352691] usb usb4: SerialNumber: 0000:00:13.3
[ 2.352691] ahci 0000:00:12.0: version 3.0
[ 2.352691] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 2.352691] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.956740] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.956743] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 3.960690] scsi0 : ahci
[ 3.960690] scsi1 : ahci
[ 3.960690] scsi2 : ahci
[ 3.960690] scsi3 : ahci
[ 3.960690] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 3.960690] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 3.960690] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 3.960690] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 4.446813] ata1: softreset failed (device not ready)
[ 4.446850] ata1: failed due to HW bug, retry pmp=0
[ 4.610678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.611539] ata1.00: ATA-7: ExcelStor Technology J8160S, P22OAB3A, max UDMA/133
[ 4.611542] ata1.00: 321672960 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.611551] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.612576] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.612579] ata1.00: configured for UDMA/133
[ 5.066153] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.910541] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.246543] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.474606] isa bounce pool size: 16 pages
[ 6.474606] scsi 0:0:0:0: Direct-Access ATA ExcelStor Techno P22O PQ: 0 ANSI: 5
[ 6.474606] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[ 6.474606] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 6.474606] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 6.474606] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 6.571110] usb usb5: configuration #1 chosen from 1 choice
[ 6.571110] hub 5-0:1.0: USB hub found
[ 6.571110] hub 5-0:1.0: 2 ports detected
[ 6.682333] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.682335] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.682338] usb usb5: Product: OHCI Host Controller
[ 6.682340] usb usb5: Manufacturer: Linux 2.6.26-1-vserver-amd64 ohci_hcd
[ 6.682342] usb usb5: SerialNumber: 0000:00:13.4
[ 6.682333] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[ 6.682333] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 6.682333] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 6.682333] ehci_hcd 0000:00:13.5: debug port 1
[ 6.682333] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 6.742350] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.742423] usb usb6: configuration #1 chosen from 1 choice
[ 6.742454] hub 6-0:1.0: USB hub found
[ 6.742464] hub 6-0:1.0: 10 ports detected
[ 6.842430] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.842433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.842435] usb usb6: Product: EHCI Host Controller
[ 6.842437] usb usb6: Manufacturer: Linux 2.6.26-1-vserver-amd64 ehci_hcd
[ 6.842439] usb usb6: SerialNumber: 0000:00:13.5
[ 6.846332] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
[ 6.846332] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.846332] SB600_PATA: not 100% native mode: will probe irqs later
[ 6.846332] ide0: BM-DMA at 0xf900-0xf907
[ 6.846332] Probing IDE interface ide0...
[ 6.898930] Driver 'sd' needs updating - please use bus_type methods
[ 6.898930] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[ 6.898930] sd 0:0:0:0: [sda] Write Protect is off
[ 6.898930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.898930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.898930] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[ 6.898930] sd 0:0:0:0: [sda] Write Protect is off
[ 6.898930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.898930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.898930] sda: sda1 sda2 < sda5 > sda3
[ 6.947060] sda3: <bsd: sda6 sda7 sda8 sda9 sda10 sda11 >
[ 6.947356] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.614572] hda: HL-DT-ST DVD-ROM GDR-H30N, ATAPI CD/DVD-ROM drive
[ 7.894569] hdb: IBM-DTTA-351010, ATA DISK drive
[ 7.950284] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.950554] hda: UDMA/33 mode selected
[ 7.950952] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.951315] hdb: UDMA/33 mode selected
[ 7.951704] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.990226] hda: ATAPI 52X DVD-ROM drive, 198kB Cache
[ 7.990226] Uniform CD-ROM driver Revision: 3.20
[ 7.994230] hdb: max request size: 128KiB
[ 7.998231] hdb: 19807200 sectors (10141 MB) w/466KiB Cache, CHS=19650/16/63
[ 7.998231] hdb: cache flushes not supported
[ 7.998231] hdb:
[ 8.215416] PM: Starting manual resume from disk
[ 8.282636] kjournald starting. Commit interval 5 seconds
[ 8.282636] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.589534] udevd version 125 started
[ 10.380556] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.382085] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.680513] input: Power Button (FF) as /class/input/input2
[ 10.732948] ACPI: Power Button (FF) [PWRF]
[ 10.732948] input: Power Button (CM) as /class/input/input3
[ 10.785593] ACPI: Power Button (CM) [PWRB]
[ 10.931197] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 11.031753] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.048613] input: PC Speaker as /class/input/input4
[ 11.797139] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 11.861033] pnp: the driver 'parport_pc' has been registered
[ 11.861033] parport_pc 00:09: reported by Plug and Play ACPI
[ 11.861033] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 11.958099] parport_pc 00:09: driver attached
[ 12.869199] Adding 2626588k swap on /dev/sda5. Priority:-1 extents:1 across:2626588k
[ 13.146306] EXT3 FS on sda1, internal journal
[ 13.892337] loop: module loaded
[ 15.013621] r8169: eth0: link up
[ 15.013621] r8169: eth0: link up
[ 15.981805] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 15.982352] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa
[ 15.982352] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc
[ 15.982352] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe
[ 15.982352] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 17.500903] lp0: using parport0 (interrupt-driven).
[ 17.524697] ppdev: user-space parallel port driver
[ 17.838197] Clocksource tsc unstable (delta = -102202823 ns)
[ 19.829253] RPC: Registered udp transport module.
[ 19.829253] RPC: Registered tcp transport module.
[ 19.938547] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.029566] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 20.041542] NFSD: starting 90-second grace period
[ 24.534715] NET: Registered protocol family 5
[ 38.693313] eth0: no IPv6 routers present
