Bildschirmauflösung bsd --> KDE

slai · 19 August 2007

Hallo zusammen

Ich habe FreeBSD nun zum ersten mal installiert, bin daher noch neu hier.
Ein problem habe ich jedoch noch, wie bringe ich KDE dazu das ich eine Bildschirmauflösung von 1280x800 einstellen kann?

Dank für Antworten

Kamikaze · 19 August 2007

Die möglichen Auflösungen hängen direkt von xorg und dem Grafiktreiber ab. Bei Intel-Treibern muss man wohl mit Zusatzprogrammen nachhelfen.

Falls du den Vesa-Treiber verwendest kannst du nur Standard-Auflösungen verwenden. Da ist mit Breitbild nichts zu machen.

Amin · 19 August 2007

Ja, leider kennt Xorg nut bestimmte Standardauflösungen. Ich muß meine 1440x900 Pixel auch immer extra in die Xorg-Konfig aufnehmen. Dann erscheint die Auflösung zur Auswahl bzw. ist Standard.

Schau mal in das Kapitel 5.4.2 unter:
http://www.freebsd.org/doc/de_DE.ISO8859-1/books/handbook/x-config.html

slai · 19 August 2007

Salü

Danke für die Antworten. Ich habe mal den Tipp Amin ausprobiert, ich sehe jedoch immer nicht meine gwünschte auflösung, hier mal mein xorg.conf file

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection

Ich habe die Auflösung die ich möchte unter Modes hinzugefügt. Dann möchte ich im Control Center von KDE unter Peripherals->Display meine gewünschte auflösung ändern, sehe jedoch eben die Auflösung 1280x800 nicht, was mache ich falsch :-)?

Danke gruss
andi

Zoi · 19 August 2007

Falls Kamikaze Recht hat, wovon ich mal erfahrungsgemäß ausgehe ;-),
kannst Du 1280x800 nicht verwenden, da Du den VESA Treiber benutzt.
Wird Deine Grafikkarte nicht von xorg unterstützt oder warum nimmst Du den vesa Treiber?

Amin · 19 August 2007

Bevor Du dich an KDE ran machst, solltest du erstmal die Xorg-Konfig testen. Wird die Auflösung überhaupt unabhängig von KDE dargestellt? Wenn du es eingetragen hast, mußt du auch deinen Rechner neu booten, dann bekommt KDE erst die neuen Einträge mit.

Das mit den VESA-Einschränkungen weiß ich nicht. Aber hast du eine solch exotische Grafikkarte, das du dich auf VESA einschränken mußt?

Kamikaze · 19 August 2007

Anscheinend hast du ja ein ATI Board. Provier doch mal Driver "radeon" statt Driver "vesa".

slai · 20 August 2007

grafikkarte

Also grafikkarte habe ich ATI Mobility Radeon X1300 welcher Treiber läuft da am besten, und kann man die auch über ports installieren? dank gruss andi

Kamikaze · 20 August 2007

Der Treiber radeon ist dafür am besten (geht allerdings nur 2D). Der ist bereits installiert, du musst ihn lediglich in der xorg.conf eintragen.

slai · 20 August 2007

Ok Danke vielmals, werde dies heute abend ausprobieren. Was währe wenn ich nach einer Zeit meine Grafikkarte 3D benötige um mit glscene 3D animationen zu programmieren? Muss ich dann einen anderen Treiber installieren?

gruss
andi

Kamikaze · 20 August 2007

Dann brauchst du eine Grafikkarte für die es überhaupt 3D-Fahige Treiber gibt. Bei einem Notebook hast du da schlechte Karten. Auf einem normalen Rechner kann man da 'ne alte Radeon 9200 SE reinsetzen, die sind billig und so ziemlich das neuste wofür es noch Treiber gibt. Alternativ gibt es für NVIDIA Karten Blobs, allerdings nur für i386. Und ich weiß nicht was alles unterstützt wird, aber die sind auf jeden Fall neuer.

slai · 20 August 2007

OK

Danke vielmals für deine Antworten, und hilfsbereitschaft, super sache!!!

gruss
Andi

Elwood · 20 August 2007

Der Nvidia-Treiber unterstützt alle aktuellen Karten (in der gleichen Version wie der Linux-Treiber). Für ältere Karten gibt es den Legacy-Treiber. http://www.nvidia.de/object/linux_de.html

slai · 21 August 2007

Salü zusammen

Habe das mit radeon mal ausprobiert, wenn ich einfach den driver wechsle startet mein x-server nicht mehr es kommt eine fehlermeldung no screens found, muss man da noch was anderes zusätzlich installieren oder einstellen, ist der Treiber von radeon in der standartinstallation von bsd schon enthalten oder nicht?

danke gruss andi

Kamikaze · 21 August 2007

Das steht in der Datei /var/log/Xorg.0.log. Bitte in einem Code-Block posten.

slai · 21 August 2007

Salü also hier mein Log file vom x-server

Code:

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: FreeBSD 6.2 i386 [ELF] 
Current Operating System: FreeBSD freebsdlapto. 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
Build Date: 16 October 2006
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 21 12:47:47 2007
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1028,01bd rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1028,01bd rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01bd rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01bd rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1028,01bd rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1028,01bd rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01bd rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7149 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,01af rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0832 card 1028,01bd rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:01:1: chip 1180,0822 card 1028,01bd rev 19 class 08,05,01 hdr 80
(II) PCI: 03:01:2: chip 1180,0843 card 1028,01bd rev 01 class 08,80,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0592 card 1028,01bd rev 0a class 08,80,00 hdr 80
(II) PCI: 03:01:4: chip 1180,0852 card 1028,01bd rev 05 class 08,80,00 hdr 80
(II) PCI: 0b:00:0: chip 8086,4222 card 8086,1021 rev 02 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xdfd00000 - 0xdfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
	[0] -1	0	0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:3), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 12 non-prefetchable memory range:
	[0] -1	0	0xdfa00000 - 0xdfbfffff (0x200000) MX[B]
(II) Bus 12 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd01fffff (0x200000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xdf900000 - 0xdf9fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x7149) rev 0, Mem @ 0xc0000000/28, 0xdfdf0000/16, I/O @ 0xee00/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xdfcff000 - 0xdfcfffff (0x1000) MX[B]E
	[1] -1	0	0xdf9fd700 - 0xdf9fd7ff (0x100) MX[B]E
	[2] -1	0	0xdf9fd600 - 0xdf9fd7ff (0x200) MX[B]E
	[3] -1	0	0xdf9fd500 - 0xdf9fd5ff (0x100) MX[B]E
	[4] -1	0	0xdf9fd400 - 0xdf9fd7ff (0x400) MX[B]E
	[5] -1	0	0xdf9fd800 - 0xdf9fdfff (0x800) MX[B]E
	[6] -1	0	0xdf9fe000 - 0xdf9fffff (0x2000) MX[B]E
	[7] -1	0	0xffa80000 - 0xffafffff (0x80000) MX[B]E
	[8] -1	0	0xdfffc000 - 0xdfffffff (0x4000) MX[B]E
	[9] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x000010c0 - 0x000010ff (0x40) IX[B]E
	[12] -1	0	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
	[13] -1	0	0x00000374 - 0x00000377 (0x4) IX[B]E
	[14] -1	0	0x00000170 - 0x0000017f (0x10) IX[B]E
	[15] -1	0	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[16] -1	0	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]E
	[18] -1	0	0x0000bf40 - 0x0000bf7f (0x40) IX[B]E
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]E
	[20] -1	0	0x0000bf80 - 0x0000bfff (0x80) IX[B]E
	[21] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xdf9fd600 from 0xdf9fd7ff to 0xdf9fd6ff
(II) PCI Memory resource overlap reduced 0xdf9fd400 from 0xdf9fd7ff to 0xdf9fd4ff
(II) PCI I/O resource overlap reduced 0x0000bf40 from 0x0000bf7f to 0x0000bf5f
(II) PCI I/O resource overlap reduced 0x0000bf80 from 0x0000bfff to 0x0000bf9f
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xdfcff000 - 0xdfcfffff (0x1000) MX[B]E
	[1] -1	0	0xdf9fd700 - 0xdf9fd7ff (0x100) MX[B]E
	[2] -1	0	0xdf9fd600 - 0xdf9fd6ff (0x100) MX[B]E
	[3] -1	0	0xdf9fd500 - 0xdf9fd5ff (0x100) MX[B]E
	[4] -1	0	0xdf9fd400 - 0xdf9fd4ff (0x100) MX[B]E
	[5] -1	0	0xdf9fd800 - 0xdf9fdfff (0x800) MX[B]E
	[6] -1	0	0xdf9fe000 - 0xdf9fffff (0x2000) MX[B]E
	[7] -1	0	0xffa80000 - 0xffafffff (0x80000) MX[B]E
	[8] -1	0	0xdfffc000 - 0xdfffffff (0x4000) MX[B]E
	[9] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x000010c0 - 0x000010ff (0x40) IX[B]E
	[12] -1	0	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
	[13] -1	0	0x00000374 - 0x00000377 (0x4) IX[B]E
	[14] -1	0	0x00000170 - 0x0000017f (0x10) IX[B]E
	[15] -1	0	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[16] -1	0	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]E
	[18] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]E
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]E
	[20] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]E
	[21] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfcff000 - 0xdfcfffff (0x1000) MX[B]E
	[6] -1	0	0xdf9fd700 - 0xdf9fd7ff (0x100) MX[B]E
	[7] -1	0	0xdf9fd600 - 0xdf9fd6ff (0x100) MX[B]E
	[8] -1	0	0xdf9fd500 - 0xdf9fd5ff (0x100) MX[B]E
	[9] -1	0	0xdf9fd400 - 0xdf9fd4ff (0x100) MX[B]E
	[10] -1	0	0xdf9fd800 - 0xdf9fdfff (0x800) MX[B]E
	[11] -1	0	0xdf9fe000 - 0xdf9fffff (0x2000) MX[B]E
	[12] -1	0	0xffa80000 - 0xffafffff (0x80000) MX[B]E
	[13] -1	0	0xdfffc000 - 0xdfffffff (0x4000) MX[B]E
	[14] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
	[15] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x000010c0 - 0x000010ff (0x40) IX[B]E
	[19] -1	0	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
	[20] -1	0	0x00000374 - 0x00000377 (0x4) IX[B]E
	[21] -1	0	0x00000170 - 0x0000017f (0x10) IX[B]E
	[22] -1	0	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[23] -1	0	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[24] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]E
	[25] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]E
	[26] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]E
	[27] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]E
	[28] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.9639
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.9.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 4.0.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 6.5.7
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireGL D1100 (RV370) 5B65 (PCIE),
	ATI Radeon Mobility M300 (M22) 5460 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
	ATI FireGL V7100 (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE), ATI Radeon FireGL (R480) GL 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.X.Org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Kamikaze · 21 August 2007

Wie es aussieht ist für die X1300 nicht einmal 2D-Untertstützung vorhanden. Das überrascht mich.

slai · 21 August 2007

Dann werde ich mal den nvidia treiber ausprobieren und mal schauen was dabei rauskommt

Kamikaze · 21 August 2007

Natürlich gar nichts, wenn du eine ATI Karte hast.

slai · 21 August 2007

Aber das ist ja ein Sch... (sorry) wenn der radeon treiber nicht mal in 2D läuft. Wie würdest du zumindest die xorg.conf einstellen das wenigstens mal die Auflösung dargestellt wird?
gruss
andi

Kamikaze · 21 August 2007

Ich würde sagen, es geht einfach nicht.

soul_rebel · 21 August 2007

vielleicht kann der ati treiber (Driver "ati" ) das ja. der unterstützt bei mehr karten 2D....

gripslund · 25 August 2007

Hallo,
ich benutze "resolution915 4b 1280 800". Das funktioniert bei mir bestens.

gripslund

bsdagent · 25 August 2007

abend

Ändere den Eintrag <Modes "1280x800"> einfach mit deiner eigene Auflösung Bsp. <Modes "640x480"> oder eben was deine grafikkarte und bildschirm unterstützen.

gruss
bsdagent

Amin · 25 August 2007

slai schrieb:
Aber das ist ja ein Sch... (sorry) wenn der radeon treiber nicht mal in 2D läuft. Wie würdest du zumindest die xorg.conf einstellen das wenigstens mal die Auflösung dargestellt wird?
gruss
andi

Also die Auflösung umstellen muß auf jeden Fall gehen! Habe ich auch hinbekommen. Ich habe hier meine xorg.conf für meine ATI Radeon gepostet, kannst du vielleicht 1:1 übernehmen und nur noch die Modes anpassen.

HW-Beschleunigung habe ich aber bei mir auch nicht hinbekommen.

Bildschirmauflösung bsd --> KDE

Member

Warrior of Sunlight

Well-Known Member

Member

Well-Known Member

Well-Known Member

Warrior of Sunlight

Member

Warrior of Sunlight

Member

Warrior of Sunlight

Member

Naiver Mutmaßlicher

Member

Warrior of Sunlight

Member

Warrior of Sunlight

Member

Warrior of Sunlight

Member

Warrior of Sunlight

ist immer auf der flucht

New Member

Auch im #bsdforen.de Chat

Well-Known Member

Wir schützen deine Privatsphäre