Externer Bildschrim konfiguriert / Xorg startet nicht

Butzelmann · 26 November 2007

Hallo

Ich habe ein Notebook, an das ich einen externen TFTMonitor anschliessen moechte, und das ganze mittels xinerama.

Leider kommt es zu einer Fehlermeldung beim Start des XORG-Servers und es erfolgt ein Abbruch des Starts.

Das Notebook ist ein Samsung Q35 mit einer Auflösung von 1280x800.
Die Grafikkarte ist eine Intel i945GM.
Der externe Bildschirm ist ein TFT mit einer Auflösung von 1280x1024.

Hier das Log vom Xorg-Server:

Code:

X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.2-STABLE i386 
Current Operating System: FreeBSD FreeBSD-TWS29 6.2-STABLE FreeBSD 6.2-STABLE #1: Fri Sep 28 13:26:37 CEST 2007     kater@FreeBSD_TWS29.:/usr/obj/usr/src/sys/MYKERNEL62 i386
Build Date: 05 October 2007  03:49:13AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 26 18:58:19 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "dual"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Card0"
(**) |-->Screen "HomeTFT" (1)
(**) |   |-->Monitor "HomeTFTMon"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc,
	/usr/local/lib/X11/fonts/TTF,
	/usr/local/lib/X11/fonts/Type1,
	/usr/local/lib/X11/fonts/75dpi,
	/usr/local/lib/X11/fonts/100dpi,
	/usr/local/lib/X11/fonts/webfonts,
	/usr/local/share/fonts,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/local/lib/X11/rgb"
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81aeda0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on freebsd
(II) LoadModule: "pcidata"
(II) Loading /usr/local/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 144d,c504 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 144d,c504 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 144d,c504 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 144d,c504 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 144d,c504 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 144d,c504 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 144d,c504 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 144d,c504 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 144d,c504 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 144d,c504 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 144d,c504 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 144d,c504 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 8086,4222 card 8086,1001 rev 02 class 02,80,00 hdr 00
(II) PCI: 05:05:0: chip 14e4,170c card 144d,c504 rev 02 class 02,00,00 hdr 00
(II) PCI: 05:09:0: chip 1180,0476 card fffc,ffff rev b4 class 06,07,00 hdr 82
(II) PCI: 05:09:1: chip 1180,0552 card 144d,c024 rev 09 class 0c,00,10 hdr 80
(II) PCI: 05:09:2: chip 1180,0822 card 144d,c024 rev 18 class 08,05,00 hdr 80
(II) PCI: 05:09:3: chip 1180,0843 card 144d,c024 rev 00 class 08,80,00 hdr 80
(II) PCI: 05:09:4: chip 1180,0592 card 144d,c024 rev 09 class 08,80,00 hdr 80
(II) PCI: 05:09:5: chip 1180,0852 card 144d,c024 rev 04 class 08,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x00002000 - 0x000020ff (0x100) IX[B]
	[1] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[2] -1	0	0x00002800 - 0x000028ff (0x100) IX[B]
	[3] -1	0	0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd1ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0000 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (5:9:0), (5,6,7), BCTRL: 0x0700 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd8100000/19, 0xc0000000/28, 0xd8200000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd8180000/19
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[1] -1	0	0xd8003000 - 0xd8003fff (0x1000) MX[B]E
	[2] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[3] -1	0	0xd8002800 - 0xd8002fff (0x800) MX[B]E
	[4] -1	0	0xd8002000 - 0xd8003fff (0x2000) MX[B]E
	[5] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
	[6] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[7] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[8] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[9] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[10] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[11] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[12] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[13] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[14] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[15] -1	0	0x00001880 - 0x000018ff (0x80) IX[B]E
	[16] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[17] -1	0	0x00001840 - 0x0000187f (0x40) IX[B]E
	[18] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[19] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) PCI Memory resource overlap reduced 0xd8003000 from 0xd8003fff to 0xd80033ff
(II) PCI Memory resource overlap reduced 0xd8002800 from 0xd8002fff to 0xd8002bff
(II) PCI Memory resource overlap reduced 0xd8002000 from 0xd8003fff to 0xd80027ff
(II) PCI Memory resource overlap reduced 0xd8000000 from 0xdfffffff to 0xd8001fff
(II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x0000189f
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[1] -1	0	0xd8003000 - 0xd80033ff (0x400) MX[B]E
	[2] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[3] -1	0	0xd8002800 - 0xd8002bff (0x400) MX[B]E
	[4] -1	0	0xd8002000 - 0xd80027ff (0x800) MX[B]E
	[5] -1	0	0xd8000000 - 0xd8001fff (0x2000) MX[B]E
	[6] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[7] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[8] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[9] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[10] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[11] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[12] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[13] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[14] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[15] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]E
	[16] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[17] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]E
	[18] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[19] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[5] -1	0	0xd8003000 - 0xd80033ff (0x400) MX[B]E
	[6] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[7] -1	0	0xd8002800 - 0xd8002bff (0x400) MX[B]E
	[8] -1	0	0xd8002000 - 0xd80027ff (0x800) MX[B]E
	[9] -1	0	0xd8000000 - 0xd8001fff (0x2000) MX[B]E
	[10] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[11] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[12] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[13] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[14] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[15] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[16] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[20] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[21] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]E
	[22] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[23] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]E
	[24] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[25] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/local/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 2.1.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[5] -1	0	0xd8003000 - 0xd80033ff (0x400) MX[B]E
	[6] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[7] -1	0	0xd8002800 - 0xd8002bff (0x400) MX[B]E
	[8] -1	0	0xd8002000 - 0xd80027ff (0x800) MX[B]E
	[9] -1	0	0xd8000000 - 0xd8001fff (0x2000) MX[B]E
	[10] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[11] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[12] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[13] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[14] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[15] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[16] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[20] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[21] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]E
	[22] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[23] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]E
	[24] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[25] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[5] -1	0	0xd8003000 - 0xd80033ff (0x400) MX[B]E
	[6] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[7] -1	0	0xd8002800 - 0xd8002bff (0x400) MX[B]E
	[8] -1	0	0xd8002000 - 0xd80027ff (0x800) MX[B]E
	[9] -1	0	0xd8000000 - 0xd8001fff (0x2000) MX[B]E
	[10] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[11] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[12] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[13] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[14] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[15] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[16] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[23] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[24] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]E
	[25] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]E
	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[28] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
	[29] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[30] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/local/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD8100000
(==) intel(0): Removed Write-combining range (0xd8100000,0x80000)
(==) intel(0): Write-combining range (0xd8200000,0x40000) was already clear
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
	for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Generic Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(==) intel(0): Write-combining range (0xa0000,0x20000) was already clear
(==) intel(0): Write-combining range (0xc0000,0x40000) was already clear
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "IVM", prod id 18100
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline "1152x864"x74.8  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(0): EDID vendor "IVM", prod id 18100
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): Output LVDS using initial mode 1280x800
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 120)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x00000f00
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x00000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x10606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/local/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/local/lib/xorg/modules//libvgahw.so
(==) intel(1): Depth 24, (==) framebuffer bpp 32
(==) intel(1): RGB weight 888
(==) intel(1): Default visual is TrueColor
(II) intel(1): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(1): Chipset: "945GM"
(--) intel(1): Linear framebuffer at 0xC0000000
(--) intel(1): IO registers at addr 0xD8100000
(==) intel(1): Removed Write-combining range (0xd8100000,0x80000)
(==) intel(1): Write-combining range (0xd8200000,0x40000) was already clear
(II) intel(1): 2 display pipes available.
(==) intel(1): Using XAA for acceleration
(--) intel(1): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(1): Will try to reserve 32768 kiB of AGP aperture space
	for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(1): Output VGA using monitor section HomeTFTMon
(II) intel(1): I2C bus "CRTDDC_A" initialized.
(II) intel(1): Output LVDS has no monitor section
(II) intel(1): I2C bus "LVDSDDC_C" initialized.
(II) intel(1): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "SEC", prod id 16705
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(==) intel(0): Write-combining range (0xa0000,0x20000) was already clear
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(1): No SDVO device found on SDVOB
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(1): No SDVO device found on SDVOC
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(1): Output TV has no monitor section
(==) intel(1): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(1): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "IVM", prod id 18100
(II) intel(1): Using EDID range info for horizontal sync
(II) intel(1): Using EDID range info for vertical refresh
(II) intel(1): Printing DDC gathered Modelines:
(II) intel(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(1): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(1): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(1): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(1): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(1): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(1): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(1): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(1): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(1): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(1): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(1): Modeline "1152x864"x74.8  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(1): EDID vendor "IVM", prod id 18100
(II) intel(1): EDID vendor "SEC", prod id 16705
(II) intel(1): Output VGA connected
(II) intel(1): Output LVDS connected
(II) intel(1): Output TV disconnected
(II) intel(1): Output VGA using initial mode 1280x1024
(II) intel(1): Output LVDS using initial mode 1280x800
(==) intel(1): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(1): Monitoring connected displays enabled
(II) intel(1): detected 256 kB GTT.
(II) intel(1): detected 7932 kB stolen memory.
(==) intel(1): video overlay key set to 0x101fe
(==) intel(1): Will not try to enable page flipping
(==) intel(1): Triple buffering disabled
(==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
(--) intel(1): Using HW Cursor because it's enabled on primary head.
(**) intel(1): Display dimensions: (340, 270) mm
(**) intel(1): DPI set to (95, 120)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/local/lib/xorg/modules//libfb.so
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/local/lib/xorg/modules//libxaa.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(1): Comparing regs from server start up to After PreInit
(WW) intel(1): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(1): PP_STATUS before: on, ready, sequencing on
(WW) intel(1): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  Yes, I do.
(II) resource ranges after preInit:
	[0] 0	0	0xd8200000 - 0xd823ffff (0x40000) MS[B]
	[1] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MS[B]
	[2] 0	0	0xd8100000 - 0xd817ffff (0x80000) MS[B]
	[3] 0	0	0xd8200000 - 0xd823ffff (0x40000) MS[B]
	[4] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MS[B]
	[5] 0	0	0xd8100000 - 0xd817ffff (0x80000) MS[B]
	[6] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[7] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[8] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[9] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[10] -1	0	0xd8003400 - 0xd80037ff (0x400) MX[B]E
	[11] -1	0	0xd8003000 - 0xd80033ff (0x400) MX[B]E
	[12] -1	0	0xd8002c00 - 0xd8002fff (0x400) MX[B]E
	[13] -1	0	0xd8002800 - 0xd8002bff (0x400) MX[B]E
	[14] -1	0	0xd8002000 - 0xd80027ff (0x800) MX[B]E
	[15] -1	0	0xd8000000 - 0xd8001fff (0x2000) MX[B]E
	[16] -1	0	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]E
	[17] -1	0	0xd8444000 - 0xd8447fff (0x4000) MX[B]E
	[18] -1	0	0xd8240000 - 0xd827ffff (0x40000) MX[B]E
	[19] -1	0	0xd8180000 - 0xd81fffff (0x80000) MX[B](B)
	[20] -1	0	0xd8200000 - 0xd823ffff (0x40000) MX[B](B)
	[21] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[22] -1	0	0xd8100000 - 0xd817ffff (0x80000) MX[B](B)
	[23] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[24] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[25] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[26] 0	0	0x00001800 - 0x00001807 (0x8) IS[B]
	[27] 0	0	0x00001800 - 0x00001807 (0x8) IS[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[30] -1	0	0x000018a0 - 0x000018bf (0x20) IX[B]E
	[31] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]E
	[32] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]E
	[33] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]E
	[34] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]E
	[35] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]E
	[36] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
	[37] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[38] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
(==) intel(0): VideoRam: 262144 KB
(==) intel(0): Removed Write-combining range (0xd8100000,0x80000)
(==) intel(0): Write-combining range (0xd8200000,0x40000) was already clear
(II) intel(0): Attempting memory allocation with tiled buffers and 
	       large DRI memory manager reservation:
(II) intel(1): Allocating 0 scanlines for pixmap cache

Fatal server error:
Caught signal 11.  Server aborting

Anbei meine xorg.conf, mit der ich versucht habe, das ganze zum Laufen zu bekommen.

Code:

Section "ServerLayout"
	Identifier	"dual"
	# Screen0 will correspond to the internal LCD
        Screen         0	"Screen0"
	# Screen1 will correspond to the external screen, you can choose 
	# its "position" wrt the other (Above, Below, LeftOf, 
	# RightOf...)
        Screen         1	"HomeTFT" RightOf "Screen0"
	# this is the magic word :
	Option		"Xinerama"	"on"
	# nothing new here :
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection


Section "Files"
	RgbPath      "/usr/local/lib/X11/rgb"
	ModulePath   "/usr/local/lib/xorg/modules"
    FontPath 	"/usr/local/lib/X11/fonts/misc"
    FontPath 	"/usr/local/lib/X11/fonts/TTF"
    FontPath 	"/usr/local/lib/X11/fonts/Type1"
    FontPath 	"/usr/local/lib/X11/fonts/75dpi"
    FontPath 	"/usr/local/lib/X11/fonts/100dpi"
    FontPath 	"/usr/local/lib/X11/fonts/webfonts"
    FontPath 	"/usr/local/share/fonts"
EndSection

Section "Module"
        Load  "dri"
        Load  "glx"
	Load  "vbe"
        Load  "extmod"
        Load  "type1"
        Load  "freetype"
        Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "int10"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
        Option     "XkbModel" "pc105"
        Option      "XkbLayout" "de_DE"
        Option      "XkbRules" "xorg"
EndSection

Section "InputDevice"
   Identifier      "Mouse0"
   Driver          "mouse"
   Option          "Protocol" "auto"
   Option          "Device" "/dev/sysmouse"
   Option          "Buttons" "5"
   Option          "ZAxisMapping" "4 5"
EndSection         

Section "Monitor"
        Identifier   "Generic Monitor"
        HorizSync 28-64
        VertRefresh 43-60
        DisplaySize     264 165
        Option            "dpms"
EndSection

Section "Monitor"
        Identifier   "HomeTFTMon"
        ModeLine "1280x1024"    135.00 1280 1296 1440 1688 1024 1025 1028 1066
	Option            "dpms"
EndSection


Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        Identifier	"Card0"
	Driver		"intel"
	VendorName	"Intel Corporation"
	BoardName	"Mobile Integrated Graphics Controller"
	BusID		"PCI:0:2:0"
#        Option		"DRI" "true"
	Option      	"MonitorLayout"  "CRT,LFP"
	Screen		0
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        Identifier	"Card1"
	Driver		"intel"	
	BusID		"PCI:0:2:0"
#        Option		"DRI" "true"
	Option      	"MonitorLayout"  "CRT,LFP"
	Screen		1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Generic Monitor"
        DefaultDepth 24
        SubSection "Display"
                Depth   1
                Modes   "1280x800"
        EndSubSection
	SubSection "Display"
		Depth	4
		Modes   "1280x800"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes   "1280x800"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes   "1280x800"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes   "1280x800"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes	"1280x800"
	EndSubSection
EndSection

Section "Screen"
	Identifier "HomeTFT"
	Device     "Card1"
	Monitor    "HomeTFTMon"
	SubSection "Display"
		Depth	16
		Modes   "1280x1024"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes	"1280x1024"
	EndSubSection
EndSection

Section "DRI"
  Mode         0666
EndSection

Section "Extensions"
Option	"Composite" "true"
EndSection

Vielen Dank für Vorschläge und Hilfe!

Kamikaze · 26 November 2007

Dein Ansatz ist etwas veraltet (jedenfalls falls du xorg-7.3 verwendest). Hast du mal versucht nach dem HowTo im Wiki vorzugehen?

dettus · 26 November 2007

versuch mal weniger module zu laden.
und den driver "intel" gegen "vesa" auszutauschen.

Butzelmann · 26 November 2007

Hi

Ich benutze xorg 7.3. Bin absolut aktuell mit den Ports.
Könntest Du mir bitte einen Link zu dem HowTo des Wiki geben?

Vesa-Treiber...
Ist das zu empfehlen? Oder soll ich den nur testweise zur Fehleranalyse ausprobieren?

Gruss, Helko

Kamikaze · 26 November 2007

http://wiki.bsdforen.de/howto/mehrmonitor-betrieb

Erster Treffer mit dem Suchwort Monitor.

Butzelmann · 27 November 2007

Ah ja super.

Ich werde wohl mit dem VirtualSize arbeiten müssen.

Wie schaut denn das nun aus:
Ich habe am Notebook die Auflösung 1280x800
und
der externe Bildschirm hat 1280x1024.

Muss ich nun die Screens untereinander anordnen? Da ja nur die 1280 übereinstimmt.
Verstehe ich das richtig, dass, wenn ich die Screens nebeneinander anordnen würde, ich von dem gesamten VirstualSize nicht alles auf meine Bildschirme bekomme, da der eine nur Y=800 und der andere Y=1024 hat?

Gruss, Helko

dettus · 27 November 2007

oder fuer den notebook-monitor die virtuelle groesse auf 1280x1024 aufblasen?

Kamikaze · 27 November 2007

Warum setzt du nicht VirtualSize auf 2560x1024? Ist die Erklärung im Artikel irgendwie unklar?

Butzelmann · 27 November 2007

Kamikaze schrieb:
Warum setzt du nicht VirtualSize auf 2560x1024? Ist die Erklärung im Artikel irgendwie unklar?

Nein nein die Erklärung ist schon gut.
Ich habe mir jetzt mal ein wenig Zeit und Ruhe genommen und alles durchgearbeitet.
Dabei kam eine Konfiguration raus, die nun bei mir die gewünschten Einstellung hat und das ganze funktioniert auch (mit externem Bildschirm).

Mich wundert nur die Durchnummerierung der Monitore. Mein Notebook-Bildschrim ist die 2 und der externe Bildschirm hat die 1.
Wonach richtet sich die Reihenfolge?

Meine xorg.conf:

Code:

Section "ServerLayout"
	Identifier	"xrandr"
	# Screen0 will correspond to the internal LCD
        Screen         0	"Screen0" 0 0
	# nothing new here :
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/local/lib/X11/rgb"
	ModulePath   "/usr/local/lib/xorg/modules"
    FontPath 	"/usr/local/lib/X11/fonts/misc"
    FontPath 	"/usr/local/lib/X11/fonts/TTF"
    FontPath 	"/usr/local/lib/X11/fonts/Type1"
    FontPath 	"/usr/local/lib/X11/fonts/75dpi"
    FontPath 	"/usr/local/lib/X11/fonts/100dpi"
    FontPath 	"/usr/local/lib/X11/fonts/webfonts"
    FontPath 	"/usr/local/share/fonts"
EndSection

Section "Module"
        Load  "dri"
        Load  "glx"
	Load  "vbe"
        Load  "extmod"
        Load  "type1"
        Load  "freetype"
        Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "int10"
EndSection

Section "DRI"
  Mode         0666
EndSection

Section "Extensions"
	Option	"Composite" "true"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
        Option     "XkbModel" "pc105"
        Option      "XkbLayout" "de_DE"
        Option      "XkbRules" "xorg"
EndSection

Section "InputDevice"
   Identifier      "Mouse0"
   Driver          "mouse"
   Option          "Protocol" "auto"
   Option          "Device" "/dev/sysmouse"
   Option          "Buttons" "5"
   Option          "ZAxisMapping" "4 5"
EndSection


#Monitor von Notebook
Section "Monitor"
        Identifier      "LVDS Monitor"
EndSection

#Externer Monitor
Section "Monitor"
        Identifier      "VGA Monitor"
        Option          "RightOf" "LVDS Monitor"
EndSection

Section "Device"
        Identifier	"Card0"
	Driver		"intel"
	VendorName	"Intel Corporation"
	BoardName	"Mobile Integrated Graphics Controller"
	BusID		"PCI:0:2:0"
        Option          "Monitor-LVDS" "LVDS Monitor"
        Option          "Monitor-VGA" "VGA Monitor"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor     "LVDS Monitor"
        Monitor     "VGA Monitor"
        DefaultDepth 24
        SubSection "Display"
                Virtual         2304 800
        EndSubSection
EndSection

Gruß, Helko

Kamikaze · 27 November 2007

Meinst du die Reihenfolge in der die Ausgänge von xrandr ausgegeben werden? Keine Ahnung. Ich denke das ist die Reihenfolge in der der Treiber die Ausgänge angibt.

Butzelmann · 27 November 2007

Ok.

Eine abschließende Sache.
Ich wollte nun auf einem der Monitore per Vollbild das Programm Krdc laufen lassen. Sobald ich dort in den Vollbild-Modus wechsle, hängt ein Teil davon in meinem anderen Monitor. Hat noch jemand diesen Effekt?

Gruss

Kamikaze · 27 November 2007

Das liegt entweder am Programm selbst oder am Window Manager. Du kannst es aber mit den meisten Windowmanagern immer noch nachträglich auf den gewollten Bildschirm schieben (selbst im Vollbildmodus).

lme · 28 November 2007

Falls du das hinbekommen hast, sag mal bescheid. Ich hab mir mit meinem Q35 und nem LCD Fernseher mit 1280x1024 und VGA-Anschluss die Zaehne ausgebissen.

Kamikaze · 28 November 2007

Der Thread ist doch schon solved.

troll · 29 November 2007

Hi,

Butzelmann schrieb:
Nein nein die Erklärung ist schon gut.
Ich habe mir jetzt mal ein wenig Zeit und Ruhe genommen und alles durchgearbeitet.
Dabei kam eine Konfiguration raus, die nun bei mir die gewünschten Einstellung hat und das ganze funktioniert auch (mit externem Bildschirm).

Dazu mal drei Fragen:

Was passiert, wenn du mit der xorg.conf ohne angeschlossenen Bildschirm startest? Ist dann das Arbeitsfeld auf die Grösse des NB-Displays begrenzt, oder kann sich die Maus auf den nichtvorhandenen Schirm verlaufen?

Was passiert, wenn du den Xserver mit angeschlossenem Monitor abschiesst(Strg+Alt+Backspace)?
Startet X wieder normal, oder vertauscht er NB-Display und angeschlossenen Monitor

Das selbe mit nicht angeschlossenem Bildschirm - funktioniert das einwandfrei?

CU

Martin

Kamikaze · 29 November 2007

Nur wenn du im Betrieb den Bildschirm abziehst, kann sich die Maus verlaufen. Aber du kannst den Bildschirm dann immernoch mit xrandr abschalten.

Beim Start verwendet X die vorhandenen Bildschirme. Ob es ein Start oder Neustart ist macht da keinen Unterschied (wieso sollte es auch?).

troll · 29 November 2007

Kamikaze schrieb:
Nur wenn du im Betrieb den Bildschirm abziehst, kann sich die Maus verlaufen. Aber du kannst den Bildschirm dann immernoch mit xrandr abschalten.

Beim Start verwendet X die vorhandenen Bildschirme. Ob es ein Start oder Neustart ist macht da keinen Unterschied (wieso sollte es auch?).

Weil alle drei Punkte hier bei nem HP-NB mit selber Grafikkarte und oldstyle xorg.conf vorkommen. Der Treiber oder die Karte scheint grundsätzlich zu melden, dass da was am Kabel hängt.

CU

Martin

Kamikaze · 29 November 2007

Hast du denn auch die akutelle Xorg-Version drauf? Wenn ja, mach doch einfach ein Backup und bastel dir 'ne neue xorg.conf.

troll · 30 November 2007

Kamikaze schrieb:
Hast du denn auch die akutelle Xorg-Version drauf? Wenn ja, mach doch einfach ein Backup und bastel dir 'ne neue xorg.conf.

Ich hab da momentan kein FreeBSD drauf. Als ich die Probleme hatte, hab ich ein anderes System draufgespielt, daher mein Interesse, ob das inzwischen funktioniert.
Auf dem NB kann ich unmöglich rumtesten. Wenn ich eine reele Chance sehe, dass die Probleme inzwischen behoben sind, dann würde ich es nochmal probieren, wenn das Teil im Urlaub nicht im Einsatz ist. Aber auch wirklich nur dann...

CU

Martin

Butzelmann · 30 November 2007

troll schrieb:
Hi,

Dazu mal drei Fragen:

Was passiert, wenn du mit der xorg.conf ohne angeschlossenen Bildschirm startest? Ist dann das Arbeitsfeld auf die Grösse des NB-Displays begrenzt, oder kann sich die Maus auf den nichtvorhandenen Schirm verlaufen?

Was passiert, wenn du den Xserver mit angeschlossenem Monitor abschiesst(Strg+Alt+Backspace)?
Startet X wieder normal, oder vertauscht er NB-Display und angeschlossenen Monitor

Das selbe mit nicht angeschlossenem Bildschirm - funktioniert das einwandfrei?

CU

Martin

Hi
Ich habe erst heute gesehen, dass es hier ja doch noch weiter geht :-)

Wenn ich RightOf eingestellt habe und nur mein Notebook ohne externen eingesteckten Bildschirm eingeschaltet ist, ist es, als haette ich nur meine 1280x800. Die Maus verrennt sich nicht etc...
Problematisch war es da, als ich Above einstellte. Da kam es zu eigenartigen Effekten, die mir schnell die Nerven raubten. Above wollte ich, um mit VirtualSize im Rahmen von 2048x2048 zu bleiben, damit dri noch geht (siehe Hinweise zu intel). Aber die nervliche Belastung durch das Verhalten war zu gross, so habe ich auf dri verzichtet und RightOf genommen :-)

Zur zweiten Frage kann ich Dir Montag anrtworten. Bin nicht im Büro. Aber ich vermute, dann ist es so, als haettest Du nie den externen angeschlossen und meine erste Antwort gilt.

Gruss

troll · 30 November 2007

Hi,

Butzelmann schrieb:
Zur zweiten Frage kann ich Dir Montag anrtworten. Bin nicht im Büro. Aber ich vermute, dann ist es so, als haettest Du nie den externen angeschlossen und meine erste Antwort gilt.

Klingt so :-)
Dank dir schonmal!
Ich hab auch grad gesehen, dass die Definitionen für die Karten inzwischen in 6.2 eingeflossen sind. Das waren sie, als ich das letzte Mal getestet hatte noch nicht. Ich hab hier die 915GM und hatte damals dann noch probiert die Definitionen selbst in agp_i810.c einzu pflegen, wodurch dann die Karte erkannt wurde, aber immernoch oben genannte Probleme auftraten.
Klingt als würd ich noch nen Test wagen :-)

CU

Martin

Externer Bildschrim konfiguriert / Xorg startet nicht

Well-Known Member

Warrior of Sunlight

Bicycle User

Well-Known Member

Warrior of Sunlight

Well-Known Member

Bicycle User

Warrior of Sunlight

Well-Known Member

Warrior of Sunlight

Well-Known Member

Warrior of Sunlight

FreeBSD Committer

Warrior of Sunlight

Well-Known Member

Warrior of Sunlight

Well-Known Member

Warrior of Sunlight

Well-Known Member

Well-Known Member

Well-Known Member

Wir schützen deine Privatsphäre