Hallo allerseits,
nachdem ich da schon länger rumgebastelt habe, möchte ich hier mal fragen.
Wenn die Aufforderung zur Passworteingabe kommt beim geli, kann ich das Passwort eingeben, bekomme als Antwort aber
dann kann ich insgesamt 6 mal das passwort eingeben, je 3 mal für
danach kann das System natürlich das root nicht mounten.
Rechner: Thinkpad T420
Partitionierung: gpt (mit mbr bootet er gar nicht, zeigt nur 3-4 seltsame Zeichen an)
gpt bootfähig gemacht mit folgendem:
https://lists.freebsd.org/pipermail/freebsd-i386/2013-March/010437.html
liegt an dem kaputten UEFI - BIOS des T420, booten geht dann, nachdem die Partitionstabelle mit fdisk so manipuliert wurde. Die zpools müssen dafür exportiert sein, sonst schreibt fdisk keine Partitionstabelle.
Für den Test bisher lasse ich mir das Passwort schon anzeigen,
in /boot/loader.conf steht unter anderem:
Zum Glück habe ich noch einen anderen Rechner.
Dort funktioniert das ganze. Das ist ein Lenovo R400. Ist die gleiche Festplatte, stecke sie dort rein, und es bootet erfolgreich.
hier noch die Ausgabe von dmesg, zuerst das T420, das nicht funktioniert:
und dann das R400, das funktioniert:
Vielleicht kann mir ja jemand einen Hinweis geben, was ich noch tun könnte. Was ich im Internet fand, zieht sich dieses Problem ja schon sehr lange hin.
nachdem ich da schon länger rumgebastelt habe, möchte ich hier mal fragen.
Wenn die Aufforderung zur Passworteingabe kommt beim geli, kann ich das Passwort eingeben, bekomme als Antwort aber
Code:
GEOM_ELI: Wrong key for ada0p4. Tries left:2.dann kann ich insgesamt 6 mal das passwort eingeben, je 3 mal für
Code:
ada0p4
diskid/DISK-....
gpt/zfs0Rechner: Thinkpad T420
Partitionierung: gpt (mit mbr bootet er gar nicht, zeigt nur 3-4 seltsame Zeichen an)
gpt bootfähig gemacht mit folgendem:
https://lists.freebsd.org/pipermail/freebsd-i386/2013-March/010437.html
liegt an dem kaputten UEFI - BIOS des T420, booten geht dann, nachdem die Partitionstabelle mit fdisk so manipuliert wurde. Die zpools müssen dafür exportiert sein, sonst schreibt fdisk keine Partitionstabelle.
Für den Test bisher lasse ich mir das Passwort schon anzeigen,
in /boot/loader.conf steht unter anderem:
Code:
kern.geom.eli.visible_passphrase=1Zum Glück habe ich noch einen anderen Rechner.
Dort funktioniert das ganze. Das ist ein Lenovo R400. Ist die gleiche Festplatte, stecke sie dort rein, und es bootet erfolgreich.
hier noch die Ausgabe von dmesg, zuerst das T420, das nicht funktioniert:
Code:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2491.96-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3996786688 (3811 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-83 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <LENOVO TP-83> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, df900000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel AMT - KT Controller> port 0x50b0-0x50b7 mem 0xf252c000-0xf252cfff irq 19 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf252b000-0xf252bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:cc:5f:ab:ed
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf252a000-0xf252a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xf2520000-0xf2523fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Advanced-N 6205> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci3
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf1400000-0xf14000ff irq 16 at device 0.0 on pci13
sdhci_pci0: 1 slot(s) allocated
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf2529000-0xf25293ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2528000-0xf25287ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20590 (Analog 2.0+HP/2.0)> at nid 31,25 and 35,27 on hdaa0
hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)
hdacc2: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc2
pcm1: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel Cougar Point (HDMI/DP 8ch)> at nid 7 on hdaa1
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1245982294 Hz quality 1000
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <UPEK> at usbus0
Root mount waiting for: usbus1 usbus0
ugen1.3: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:4:0:-1: Attached to scbus4
ugen0.4: <Broadcom Corp> at usbus0
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F63666471
da0: 40.000MB/s transfers
da0: 14991MB (30702592 512 byte sectors: 255H 63S/T 1911C)
da0: quirks=0x2<NO_6_BYTE>
ugen0.5: <Chicony Electronics Co., Ltd.> at usbus0
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
ubt0: <Broadcom Corp Broadcom Bluetooth Device, class 224/1, rev 2.00/7.48, addr 4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ugen0.6: <SanDisk> at usbus0
umass1: <SanDisk Cruzer Switch, class 0/0, rev 2.00/1.27, addr 6> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x0100
umass1:5:1:-1: Attached to scbus5
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <SanDisk Cruzer Switch 1.27> Removable Direct Access SCSI-6 device
da1: Serial Number 4C530007470528110583
da1: 40.000MB/s transfers
da1: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da1: quirks=0x2<NO_6_BYTE>
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)und dann das R400, das funktioniert:
Code:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p5 #0: Tue Jan 27 08:55:07 UTC 2015
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (2527.06-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 0x6 Model = 0x17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8155037696 (7777 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-7U >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <LENOVO TP-7U> on motherboard
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4400000-0xf47fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf4200000-0xf42fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x1840-0x185f mem 0xfc000000-0xfc01ffff,0xfc025000-0xfc025fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:22:68:20:39:08
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc226c00-0xfc226fff irq 23 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0xfc020000-0xfc023fff irq 17 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel WiFi Link 5100> mem 0xf4300000-0xf4301fff irq 17 at device 0.0 on pci3
pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc227000-0xfc2273ff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf4800000-0xf4800fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci21: <serial bus, FireWire> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xfc226000-0xfc2267ff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20561 (Hermosa) (Front Analog)> at nid 22 and 24 on hdaa0
pcm1: <Conexant CX20561 (Hermosa) (Internal Analog)> at nid 26 and 29 on hdaa0
unknown: <Conexant CX20561 (Hermosa) HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached)
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen6.1: <Intel> at usbus6
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen5.1: <Intel> at usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HITACHI HTS723216L9SA60 FC2ZC50B> ATA-8 SATA 1.x device
ada0: Serial Number 091106FC1220NCJ5NNKG
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HTS541010A9E680 JA0OA560> ATA-8 SATA 3.x device
ada1: Serial Number JD1008CC1XAH0V
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub0: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Enter passphrase for ada1p4: ugen3.2: <SanDisk> at usbus3
umass0: <SanDisk Cruzer Switch, class 0/0, rev 2.00/1.27, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <SanDisk Cruzer Switch 1.27> Removable Direct Access SCSI-6 device
da0: Serial Number 4C530007470528110583
da0: 40.000MB/s transfers
da0: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da0: quirks=0x2<NO_6_BYTE>
ugen1.2: <Lenovo Computer Corp> at usbus1
GEOM_ELI: Wrong key for ada1p4. Tries left: 2.
Enter passphrase for ada1p4: GEOM_ELI: Device ada1p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Trying to mount root from zfs:zroot/ROOT/default []...
GEOM_ELI: Device ada1p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
wlan0: Ethernet address: 00:26:c6:0b:ae:d2
ubt0: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II, class 224/1, rev 2.00/3.99, addr 2> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()Vielleicht kann mir ja jemand einen Hinweis geben, was ich noch tun könnte. Was ich im Internet fand, zieht sich dieses Problem ja schon sehr lange hin.
