penguin007
Member
Hi
Habe hier ein NetBSD 2.1 auf ein P3 866 Mhz installiert 512MB Ram
Das System hängt sich dauernd auf, ich vermute das es am DMA liegt
hier mal was von messages
und hier dmesg:
mfg penguin
Habe hier ein NetBSD 2.1 auf ein P3 866 Mhz installiert 512MB Ram
Das System hängt sich dauernd auf, ich vermute das es am DMA liegt
hier mal was von messages
Code:
Nov 10 03:15:10 emir /netbsd: viaide0:0:0: lost interrupt
Nov 10 03:15:12 emir /netbsd: type: ata tc_bcount: 16384 tc_skip: 0
Nov 10 03:15:12 emir /netbsd: viaide0:0:0: bus-master DMA error: missing interrupt, status=0x61
Nov 10 03:15:12 emir /netbsd: viaide0:0:0: device timeout, c_bcount=16384, c_skip0
Nov 10 03:15:12 emir /netbsd: wd0a: device timeout reading fsbn 10186656 of 10186656-10186687 (wd0 bn 10186719; cn 10105 tn 13 sn 60), retrying
Nov 10 03:15:12 emir /netbsd: wd0: soft error (corrected)
Code:
NetBSD 2.1 (GENERIC) #0: Mon Oct 24 22:35:45 UTC 2005
jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-1-RELEASE/i386/200510241747Z-obj/home/builds/ab/netbsd-2-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xfb260
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 975.06 MHz, id 0x683
cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0683-0002-13E5-116C-0972
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C596A (Apollo Pro) PCI-ISA Bridge (rev. 0x23)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C596A (Apollo Pro) ATA66 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
pchb1 at pci0 dev 7 function 3
pchb1: VIA Technologies product 0x3050 (rev. 0x30)
vga1 at pci0 dev 9 function 0: Matrox MGA Mystique 1064SG (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 12
rtk0: Ethernet address 00:e0:7d:e7:30:fa
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0 at pci0 dev 11 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:05:5d:a3:4a:95
sqphy0 at vr0 phy 8: Seeq 80225 10/100 media interface, rev. 0
sqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci0 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 11
ex0: MAC address 00:50:04:ef:52:aa
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST330630A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29188 MB, 59303 cyl, 16 head, 63 sec, 512 bytes/sect x 59777640 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <ST380011A>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wd2 at atabus1 drive 0: <Maxtor 6Y080L0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pppoe0: received unexpected PADO
/dev/wd1a: file system not clean (fs_clean=0); please fsck(8)
/dev/wd1a: lost blocks 0 files 0
mfg penguin