nic geht nicht?? - newbie

jamie

Member
Hallo liebe Gemeinde :)
Ich bin ein ziemlicher Anfänger auf dem BSD-Gebiet, finde *nix aber einfach sau geil. Deswegen wollte ich auch wechseln bzw beides benutzen ( Linux und *BSD ). Nun zu meiner Frage:

Ich habe einen Acer Nitro 5 (an515-55) Laptop, und auf dem wird meine Netzwerkkarte von FreeBSD nicht erkannt. 'ifconfig' spuckt nur das loopback device aus... Was kann ich tun??
 

mr44er

moderater Moderator
Teammitglied
...und noch ein pciconf -lv ist ganz dienlich. Bitte alles in [code]-tags packen, damit es gut lesbar ist. ;)
 

CommanderZed

OpenBSD User
Teammitglied
Moin,

soweit ich das sehe hat das Notebook lt. Datenblatt eine "Killer LAN 2600" NIC von Intel - lt Internet wird die wohl von keinem *BSD unterstützt da die recht exklusiv für Gaming-Geräte gebaut wird - das ist keine besonders intensiv verfolge Zielplattform der *BSDs sag ich jetzt mal vorsichtig.

Du könntest dir mit einem USB-LAN-Adapter behelfen.
 

jamie

Member
Code:
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr  9 04:24:09 UTC 2021
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1920x1080
CPU: Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz (2592.16-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xa0652  Family=0x6  Model=0xa5  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features2=0x40000008<PKU,SGXLC>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16432914432 (15671 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ACRSYS ACRPRDCT>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 10 9 5 3 7 11 8 4 2 6
Timecounter "TSC-low" frequency 1296078451 Hz quality 1000
KTLS: Initialized 12 threads
random: entropy device external interface
000.000019 [4354] netmap_init               netmap: loaded module
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ACRSYS ACRPRDCT>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xa0000000-0xa0ffffff,0x6000000000-0x61ffffffff,0x6200000000-0x6201ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x228e) HDA Controller> mem 0xa1000000-0xa1003fff at device 0.1 on pci1
vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0x6202000000-0x6202ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci1: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1280000-0xa128ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xa1290000-0xa1291fff,0xa1294000-0xa12940ff,0xa1293000-0xa12937ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac1: <Intel Comet Lake-H HDA Controller> mem 0x6203108000-0x620310bfff,0x6203000000-0x62030fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_syscontainer0: <System Container> on acpi0
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
hwpstate_intel8: <Intel Speed Shift> on cpu8
hwpstate_intel9: <Intel Speed Shift> on cpu9
hwpstate_intel10: <Intel Speed Shift> on cpu10
hwpstate_intel11: <Intel Speed Shift> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x009f) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x009f) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x009f) (HDMI/DP 8ch)> at nid 6 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac1
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
Trying to mount root from ufs:/dev/ada0p6 [rw]...
Root mount waiting for: usbus0 CAM
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SSD PLUS 1000GB UH4504RL> ACS-3 ATA SATA 3.x device
ada0: Serial Number 2140JW442405
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Root mount waiting for: usbus0
uhub0: 24 ports with 24 removable, self powered
ugen0.2: <Corsair Corsair Gaming HARPOON RGB Mouse> at usbus0
Root mount waiting for: usbus0
ugen0.3: <Apple Inc. Magic Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <Keyboard / Boot> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <SunplusIT Inc HD User Facing> at usbus0
ugen0.5: <vendor 0x8087 product 0x0026> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.6: <Innostor PenDrive> at usbus0
umass0 on uhub0
umass0: <Innostor PenDrive, class 0/0, rev 3.10/0.01, addr 5> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Innostor Innostor 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000000000000954
da0: 400.000MB/s transfers
da0: 60000MB (122880000 512 byte sectors)
da0: quirks=0x12<NO_6_BYTE,NO_RC16>
mountroot: waiting for device /dev/ada0p6...
ig4iic0: <Intel Comet Lake-H I2C Controller-0> at device 21.0 on pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Intel Comet Lake-H I2C Controller-1> at device 21.1 on pci0
ig4iic1: Using MSI
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
iicbus1: <unknown card> at addr 0x15
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_dock0: <ACPI Docking Station> on acpi0
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi3: Embedded MOF found
ACPI: \134_SB.PCI0.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
lo0: link state changed to UP
ums0 on uhub0
ums0: <Corsair Corsair Gaming HARPOON RGB Mouse, class 0/0, rev 2.00/3.08, addr 1> on usbus0
ums0: 31 buttons and [XYZ] coordinates ID=1
uhid0 on uhub0
uhid0: <Corsair Corsair Gaming HARPOON RGB Mouse, class 0/0, rev 2.00/3.08, addr 1> on usbus0
uhid1 on uhub0
uhid1: <Device Management> on usbus0
iichid0: <ELAN050A:01 04F3:3158 I2C HID device> at addr 0x15 on iicbus1
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
hms0: <ELAN050A:01 04F3:3158 Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN050A:01 04F3:3158 TouchPad> on hidbus0
hconf0: <ELAN050A:01 04F3:3158 Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3235:2346]
Security policy loaded: MAC/ntpd (mac_ntpd)

Sieht irwie nicht so prickelnd aus...
Code:
 pciconf -lv
sieht leider auch nicht so vielversprechend aus... Die letzte Nachricht hats mir jetzt natürlich gegeben. Naja, halb so wild. Hab momentan leider keinen Desktop-PC zur Verfügung (außer meinen Proxmox Node), aber wenn ich mir wieder einen hole dann hau ich gleich BSD rauf. Nungut, ich habe auf meinem AN515-55 auch ein gewisses OS das sich auf "KekOS" reimt.... Ist ja quasi freebsd.


Danke und schönen Abend euch! Solltet ihr mitkriegen dass sich was ändert sagt Bescheid...
 
Oben