Hallo,
mir ist jetzt 2 mal innerhalb von einigen Tagen der Server "stehengeblieben". Untenstehendes gibt smartctl raus.
Die Betriebsstunden sind hoch.
Deuten diese Fehler auf Plattenprobleme hin oder liegt es vielleicht doch eher
an meinem neuen Motherboard / SATA Verkabelung?
Danke und Gruß,
Peter
smartctl -a /dev/ada0
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 5K3000
Device Model: Hitachi HDS5C3020ALA632
Serial Number: ML0220F30MJ0WD
LU WWN Device Id: 5 000cca 369c8df38
Firmware Version: ML6OA580
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5940 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 10 17:09:26 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80)Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0)The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (23306) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003)Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 389) minutes.
SCT capabilities: (0x003d)SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 100
3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 400 (Average 398)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 285
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 144 144 020 Pre-fail Offline - 30
9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 51446
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 283
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 368
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 368
194 Temperature_Celsius 0x0002 181 181 000 Old_age Always - 33 (Min/Max 16/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 4
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 cd 93 e6 0b Error: ICRC, ABRT at LBA = 0x0be693cd = 199660493
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 02 02 cd 93 e6 4b ff 22:03:23.077 WRITE FPDMA QUEUED
61 02 68 cd 93 e6 40 00 22:03:23.076 WRITE FPDMA QUEUED
ef 02 00 00 00 00 40 00 22:03:23.076 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 22:03:23.076 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 22:03:23.076 SET MULTIPLE MODE
Error 3 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 e5 89 e6 0b Error: ICRC, ABRT at LBA = 0x0be689e5 = 199657957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 10 02 e5 89 e6 4b ff 22:03:22.968 WRITE FPDMA QUEUED
61 10 28 10 83 e0 40 00 22:03:22.967 WRITE FPDMA QUEUED
61 02 20 e5 89 e6 40 00 22:03:22.938 WRITE FPDMA QUEUED
60 10 18 10 03 00 40 00 22:03:22.938 READ FPDMA QUEUED
60 10 10 10 85 e0 40 00 22:03:22.938 READ FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 b3 59 03 0f Error: ICRC, ABRT at LBA = 0x0f0359b3 = 251877811
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 02 02 b3 59 03 4f ff 22:03:22.830 WRITE FPDMA QUEUED
61 02 c8 b3 59 03 40 00 22:03:22.829 WRITE FPDMA QUEUED
61 1a c0 6d c8 61 40 00 22:03:22.825 WRITE FPDMA QUEUED
61 01 b8 72 50 f8 40 00 22:03:22.825 WRITE FPDMA QUEUED
61 19 b0 0d 92 22 40 00 22:03:22.825 WRITE FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 51301 hours (2137 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 4c b2 71 00 03 Error: ICRC, ABRT at LBA = 0x030071b2 = 50360754
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 f0 62 03 40 00 1d+03:58:00.515 READ FPDMA QUEUED
61 4c 18 b2 71 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 4e 10 b8 6e 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 26 08 97 3e 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 0d 00 2e 30 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13337 -
# 2 Short offline Completed without error 00% 11720 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
mir ist jetzt 2 mal innerhalb von einigen Tagen der Server "stehengeblieben". Untenstehendes gibt smartctl raus.
Die Betriebsstunden sind hoch.
Deuten diese Fehler auf Plattenprobleme hin oder liegt es vielleicht doch eher
an meinem neuen Motherboard / SATA Verkabelung?
Danke und Gruß,
Peter
smartctl -a /dev/ada0
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 5K3000
Device Model: Hitachi HDS5C3020ALA632
Serial Number: ML0220F30MJ0WD
LU WWN Device Id: 5 000cca 369c8df38
Firmware Version: ML6OA580
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5940 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 10 17:09:26 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80)Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0)The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (23306) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003)Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 389) minutes.
SCT capabilities: (0x003d)SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 100
3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 400 (Average 398)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 285
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 144 144 020 Pre-fail Offline - 30
9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 51446
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 283
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 368
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 368
194 Temperature_Celsius 0x0002 181 181 000 Old_age Always - 33 (Min/Max 16/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 4
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 cd 93 e6 0b Error: ICRC, ABRT at LBA = 0x0be693cd = 199660493
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 02 02 cd 93 e6 4b ff 22:03:23.077 WRITE FPDMA QUEUED
61 02 68 cd 93 e6 40 00 22:03:23.076 WRITE FPDMA QUEUED
ef 02 00 00 00 00 40 00 22:03:23.076 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 22:03:23.076 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 22:03:23.076 SET MULTIPLE MODE
Error 3 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 e5 89 e6 0b Error: ICRC, ABRT at LBA = 0x0be689e5 = 199657957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 10 02 e5 89 e6 4b ff 22:03:22.968 WRITE FPDMA QUEUED
61 10 28 10 83 e0 40 00 22:03:22.967 WRITE FPDMA QUEUED
61 02 20 e5 89 e6 40 00 22:03:22.938 WRITE FPDMA QUEUED
60 10 18 10 03 00 40 00 22:03:22.938 READ FPDMA QUEUED
60 10 10 10 85 e0 40 00 22:03:22.938 READ FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 51323 hours (2138 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 b3 59 03 0f Error: ICRC, ABRT at LBA = 0x0f0359b3 = 251877811
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 02 02 b3 59 03 4f ff 22:03:22.830 WRITE FPDMA QUEUED
61 02 c8 b3 59 03 40 00 22:03:22.829 WRITE FPDMA QUEUED
61 1a c0 6d c8 61 40 00 22:03:22.825 WRITE FPDMA QUEUED
61 01 b8 72 50 f8 40 00 22:03:22.825 WRITE FPDMA QUEUED
61 19 b0 0d 92 22 40 00 22:03:22.825 WRITE FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 51301 hours (2137 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 4c b2 71 00 03 Error: ICRC, ABRT at LBA = 0x030071b2 = 50360754
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 f0 62 03 40 00 1d+03:58:00.515 READ FPDMA QUEUED
61 4c 18 b2 71 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 4e 10 b8 6e 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 26 08 97 3e 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
61 0d 00 2e 30 00 40 00 1d+03:58:00.515 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13337 -
# 2 Short offline Completed without error 00% 11720 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.