• Diese Seite verwendet Cookies. Indem du diese Website weiterhin nutzt, erklärst du dich mit der Verwendung von Cookies einverstanden. Erfahre mehr

USB Tastatur nach Boot zickig

hippodriver

Well-Known Member
Themenstarter #1
Hallo allerseits,

nach Ende des Boot-vorgangs, wenn ich mich zum ersten mal am System anmelden will, macht meine USB Tastatur Probleme. Circa jedes vierte eingegebene Zeichen wird nicht richtig verarbeitet: Entweder wird der Tastendruck garnicht registriert, oder ein Tastendruck erzeugt unendlich viele Zeichen.
  • Das Problem tritt sowohl im X11 login als auch auf der Konsole auf.
  • Das Problem läßt sich mit einer anderen USB Tastatur reproduzieren
  • Das Problem tritt nach jedem Neustart auf

Zum Glück gibt es einen Workaround: Ich krabbel unter den Tisch, ziehe die Tastatur aus der USB Buchse und stecke sie wieder rein. Danach funktioniert die Tastatur problemlos. Den Vorgang kann man am Ende der messages Datei sehen:
Code:
May  5 11:25:20 gandalf syslogd: kernel boot file is /boot/kernel/kernel
May  5 11:25:20 gandalf kernel: Copyright (c) 1992-2012 The FreeBSD Project.
May  5 11:25:20 gandalf kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
May  5 11:25:20 gandalf kernel: The Regents of the University of California. All rights reserved.
May  5 11:25:20 gandalf kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
May  5 11:25:20 gandalf kernel: FreeBSD 9.1-RELEASE-p3 #0: Mon Apr 29 18:27:25 UTC 2013
May  5 11:25:20 gandalf kernel: root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
May  5 11:25:20 gandalf kernel: CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (3093.04-MHz K8-class CPU)
May  5 11:25:20 gandalf kernel: Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
May  5 11:25:20 gandalf kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
May  5 11:25:20 gandalf kernel: Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
May  5 11:25:20 gandalf kernel: AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
May  5 11:25:20 gandalf kernel: AMD Features2=0x1<LAHF>
May  5 11:25:20 gandalf kernel: TSC: P-state invariant, performance statistics
May  5 11:25:20 gandalf kernel: real memory  = 17179869184 (16384 MB)
May  5 11:25:20 gandalf kernel: avail memory = 16489955328 (15726 MB)
May  5 11:25:20 gandalf kernel: Event timer "LAPIC" quality 600
May  5 11:25:20 gandalf kernel: ACPI APIC Table: <INTEL  DH67BL  >
May  5 11:25:20 gandalf kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
May  5 11:25:20 gandalf kernel: FreeBSD/SMP: 1 package(s) x 4 core(s)
May  5 11:25:20 gandalf kernel: cpu0 (BSP): APIC ID:  0
May  5 11:25:20 gandalf kernel: cpu1 (AP): APIC ID:  2
May  5 11:25:20 gandalf kernel: cpu2 (AP): APIC ID:  4
May  5 11:25:20 gandalf kernel: cpu3 (AP): APIC ID:  6
May  5 11:25:20 gandalf kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
May  5 11:25:20 gandalf kernel: kbd1 at kbdmux0
May  5 11:25:20 gandalf kernel: ctl: CAM Target Layer loaded
May  5 11:25:20 gandalf kernel: cryptosoft0: <software crypto> on motherboard
May  5 11:25:20 gandalf kernel: aesni0: <AES-CBC,AES-XTS> on motherboard
May  5 11:25:20 gandalf kernel: acpi0: <INTEL DH67BL> on motherboard
May  5 11:25:20 gandalf kernel: acpi0: Power Button (fixed)
May  5 11:25:20 gandalf kernel: cpu0: <ACPI CPU> on acpi0
May  5 11:25:20 gandalf kernel: cpu1: <ACPI CPU> on acpi0
May  5 11:25:20 gandalf kernel: cpu2: <ACPI CPU> on acpi0
May  5 11:25:20 gandalf kernel: cpu3: <ACPI CPU> on acpi0
May  5 11:25:20 gandalf kernel: attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
May  5 11:25:20 gandalf kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
May  5 11:25:20 gandalf kernel: Event timer "i8254" frequency 1193182 Hz quality 100
May  5 11:25:20 gandalf kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
May  5 11:25:20 gandalf kernel: Event timer "RTC" frequency 32768 Hz quality 0
May  5 11:25:20 gandalf kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
May  5 11:25:20 gandalf kernel: Timecounter "HPET" frequency 14318180 Hz quality 950
May  5 11:25:20 gandalf kernel: Event timer "HPET" frequency 14318180 Hz quality 550
May  5 11:25:20 gandalf kernel: Event timer "HPET1" frequency 14318180 Hz quality 440
May  5 11:25:20 gandalf kernel: Event timer "HPET2" frequency 14318180 Hz quality 440
May  5 11:25:20 gandalf kernel: Event timer "HPET3" frequency 14318180 Hz quality 440
May  5 11:25:20 gandalf kernel: Event timer "HPET4" frequency 14318180 Hz quality 440
May  5 11:25:20 gandalf kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
May  5 11:25:20 gandalf kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
May  5 11:25:20 gandalf kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
May  5 11:25:20 gandalf kernel: pci0: <ACPI PCI bus> on pcib0
May  5 11:25:20 gandalf kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
May  5 11:25:20 gandalf kernel: pci1: <ACPI PCI bus> on pcib1
May  5 11:25:20 gandalf kernel: vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
May  5 11:25:20 gandalf kernel: nvidia0: <GeForce 210> on vgapci0
May  5 11:25:20 gandalf kernel: vgapci0: child nvidia0 requested pci_enable_io
May  5 11:25:20 gandalf kernel: vgapci0: child nvidia0 requested pci_enable_io
May  5 11:25:20 gandalf kernel: hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
May  5 11:25:20 gandalf kernel: pci0: <simple comms> at device 22.0 (no driver attached)
May  5 11:25:20 gandalf kernel: em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf040-0xf05f mem 0xf7200000-0xf721ffff,0xf7228000-0xf7228fff irq 20 at device 25.0 on pci0
May  5 11:25:20 gandalf kernel: em0: Using an MSI interrupt
May  5 11:25:20 gandalf kernel: em0: Ethernet address: e0:69:95:d8:24:f2
May  5 11:25:20 gandalf kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7227000-0xf72273ff irq 16 at device 26.0 on pci0
May  5 11:25:20 gandalf kernel: usbus0: EHCI version 1.0
May  5 11:25:20 gandalf kernel: usbus0 on ehci0
May  5 11:25:20 gandalf kernel: hdac1: <Intel Cougar Point HDA Controller> mem 0xf7220000-0xf7223fff irq 22 at device 27.0 on pci0
May  5 11:25:20 gandalf kernel: pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
May  5 11:25:20 gandalf kernel: pci2: <ACPI PCI bus> on pcib2
May  5 11:25:20 gandalf kernel: pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
May  5 11:25:20 gandalf kernel: pci3: <ACPI PCI bus> on pcib3
May  5 11:25:20 gandalf kernel: pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
May  5 11:25:20 gandalf kernel: pci4: <ACPI PCI bus> on pcib4
May  5 11:25:20 gandalf kernel: xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 19 at device 0.0 on pci4
May  5 11:25:20 gandalf kernel: xhci0: 32 byte context size.
May  5 11:25:20 gandalf kernel: usbus1 on xhci0
May  5 11:25:20 gandalf kernel: ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7226000-0xf72263ff irq 23 at device 29.0 on pci0
May  5 11:25:20 gandalf kernel: usbus2: EHCI version 1.0
May  5 11:25:20 gandalf kernel: usbus2 on ehci1
May  5 11:25:20 gandalf kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
May  5 11:25:20 gandalf kernel: isa0: <ISA bus> on isab0
May  5 11:25:20 gandalf kernel: ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7225000-0xf72257ff irq 19 at device 31.2 on pci0
May  5 11:25:20 gandalf kernel: ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
May  5 11:25:20 gandalf kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
May  5 11:25:20 gandalf kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
May  5 11:25:20 gandalf kernel: ahcich2: <AHCI channel> at channel 2 on ahci0
May  5 11:25:20 gandalf kernel: ahcich3: <AHCI channel> at channel 3 on ahci0
May  5 11:25:20 gandalf kernel: ahcich4: <AHCI channel> at channel 4 on ahci0
May  5 11:25:20 gandalf kernel: ahcich5: <AHCI channel> at channel 5 on ahci0
May  5 11:25:20 gandalf kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
May  5 11:25:20 gandalf kernel: acpi_button0: <Power Button> on acpi0
May  5 11:25:20 gandalf kernel: orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
May  5 11:25:20 gandalf kernel: sc0: <System console> at flags 0x100 on isa0
May  5 11:25:20 gandalf kernel: sc0: VGA <16 virtual consoles, flags=0x300>
May  5 11:25:20 gandalf kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
May  5 11:25:20 gandalf kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
May  5 11:25:20 gandalf kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
May  5 11:25:20 gandalf kernel: kbd0 at atkbd0
May  5 11:25:20 gandalf kernel: atkbd0: [GIANT-LOCKED]
May  5 11:25:20 gandalf kernel: ppc0: cannot reserve I/O port range
May  5 11:25:20 gandalf kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
May  5 11:25:20 gandalf kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
May  5 11:25:20 gandalf kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1
May  5 11:25:20 gandalf kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
May  5 11:25:20 gandalf kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2
May  5 11:25:20 gandalf kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
May  5 11:25:20 gandalf kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3
May  5 11:25:20 gandalf kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
May  5 11:25:20 gandalf kernel: ZFS filesystem version 5
May  5 11:25:20 gandalf kernel: ZFS storage pool version 28
May  5 11:25:20 gandalf kernel: Timecounters tick every 10.000 msec
May  5 11:25:20 gandalf kernel: vboxdrv: fAsync=0 offMin=0x1f8 offMax=0x518
May  5 11:25:20 gandalf kernel: hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
May  5 11:25:20 gandalf kernel: hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
May  5 11:25:20 gandalf kernel: pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
May  5 11:25:20 gandalf kernel: hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
May  5 11:25:20 gandalf kernel: hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
May  5 11:25:20 gandalf kernel: pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
May  5 11:25:20 gandalf kernel: hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
May  5 11:25:20 gandalf kernel: hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
May  5 11:25:20 gandalf kernel: pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
May  5 11:25:20 gandalf kernel: hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
May  5 11:25:20 gandalf kernel: hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
May  5 11:25:20 gandalf kernel: pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
May  5 11:25:20 gandalf kernel: hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
May  5 11:25:20 gandalf kernel: hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4
May  5 11:25:20 gandalf kernel: pcm4: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa4
May  5 11:25:20 gandalf kernel: pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4
May  5 11:25:20 gandalf kernel: pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4
May  5 11:25:20 gandalf kernel: pcm7: <Realtek ALC892 (Rear Digital)> at nid 17 on hdaa4
May  5 11:25:20 gandalf kernel: usbus0: 480Mbps High Speed USB v2.0
May  5 11:25:20 gandalf kernel: usbus1: 5.0Gbps Super Speed USB v3.0
May  5 11:25:20 gandalf kernel: usbus2: 480Mbps High Speed USB v2.0
May  5 11:25:20 gandalf kernel: ugen0.1: <Intel> at usbus0
May  5 11:25:20 gandalf kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
May  5 11:25:20 gandalf kernel: ugen1.1: <0x1033> at usbus1
May  5 11:25:20 gandalf kernel: uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
May  5 11:25:20 gandalf kernel: ugen2.1: <Intel> at usbus2
May  5 11:25:20 gandalf kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
May  5 11:25:20 gandalf kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
May  5 11:25:20 gandalf kernel: ada0: <ST3320418AS CC44> ATA-8 SATA 2.x device
May  5 11:25:20 gandalf kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
May  5 11:25:20 gandalf kernel: ada0: Command Queueing enabled
May  5 11:25:20 gandalf kernel: ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
May  5 11:25:20 gandalf kernel: ada0: Previously was known as ad4
May  5 11:25:20 gandalf kernel: ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
May  5 11:25:20 gandalf kernel: ada1: <WDC WD10EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
May  5 11:25:20 gandalf kernel: ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
May  5 11:25:20 gandalf kernel: ada1: Command Queueing enabled
May  5 11:25:20 gandalf kernel: ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
May  5 11:25:20 gandalf kernel: ada1: Previously was known as ad8
May  5 11:25:20 gandalf kernel: ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
May  5 11:25:20 gandalf kernel: ada2: <ST31000520AS CC32> ATA-8 SATA 2.x device
May  5 11:25:20 gandalf kernel: ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
May  5 11:25:20 gandalf kernel: ada2: Command Queueing enabled
May  5 11:25:20 gandalf kernel: ada2: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C)
May  5 11:25:20 gandalf kernel: ada2: Previously was known as ad10
May  5 11:25:20 gandalf kernel: SMP: AP CPU #1 Launched!
May  5 11:25:20 gandalf kernel: SMP: AP CPU #3 Launched!
May  5 11:25:20 gandalf kernel: SMP: AP CPU #2 Launched!
May  5 11:25:20 gandalf kernel: Timecounter "TSC-low" frequency 12082175 Hz quality 1000
May  5 11:25:20 gandalf kernel: cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
May  5 11:25:20 gandalf kernel: cd0: <ATAPI iHAS224   B GL08> Removable CD-ROM SCSI-0 device 
May  5 11:25:20 gandalf kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
May  5 11:25:20 gandalf kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
May  5 11:25:20 gandalf kernel: uhub1: 4 ports with 4 removable, self powered
May  5 11:25:20 gandalf kernel: GEOM: ada2: the primary GPT table is corrupt or invalid.
May  5 11:25:20 gandalf kernel: GEOM: ada2: using the secondary instead -- recovery strongly advised.
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus2 usbus0
May  5 11:25:20 gandalf kernel: uhub0: 2 ports with 2 removable, self powered
May  5 11:25:20 gandalf kernel: uhub2: 2 ports with 2 removable, self powered
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus2 usbus0
May  5 11:25:20 gandalf kernel: ugen0.2: <vendor 0x8087> at usbus0
May  5 11:25:20 gandalf kernel: uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
May  5 11:25:20 gandalf kernel: ugen2.2: <vendor 0x8087> at usbus2
May  5 11:25:20 gandalf kernel: uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
May  5 11:25:20 gandalf kernel: uhub3: 6 ports with 6 removable, self powered
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus2 usbus0
May  5 11:25:20 gandalf kernel: uhub4: 8 ports with 8 removable, self powered
May  5 11:25:20 gandalf kernel: ugen0.3: <vendor 0x04d9> at usbus0
May  5 11:25:20 gandalf kernel: ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus0
May  5 11:25:20 gandalf kernel: kbd2 at ukbd0
May  5 11:25:20 gandalf kernel: ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus0
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus0
May  5 11:25:20 gandalf kernel: ugen0.4: <vendor 0x05e3> at usbus0
May  5 11:25:20 gandalf kernel: uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> on usbus0
May  5 11:25:20 gandalf kernel: uhub5: 4 ports with 4 removable, self powered
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus0
May  5 11:25:20 gandalf kernel: ugen0.5: <Canon> at usbus0
May  5 11:25:20 gandalf kernel: Root mount waiting for: usbus0
May  5 11:25:20 gandalf kernel: ugen0.6: <Logitech> at usbus0
May  5 11:25:20 gandalf kernel: ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 6> on usbus0
May  5 11:25:20 gandalf kernel: ums1: 3 buttons and [XYZ] coordinates ID=0
May  5 11:25:20 gandalf kernel: Trying to mount root from zfs:tank0/ROOT/default []...
May  5 11:25:20 gandalf kernel: Cuse4BSD v0.1.26 @ /dev/cuse
May  5 11:25:20 gandalf kernel: ppc0: cannot reserve I/O port range
May  5 11:25:20 gandalf kernel: SGI XFS with large block numbers, tracing, no debug enabled
May  5 11:25:20 gandalf kernel: WARNING: attempt to domain_add(bluetooth) after domainfinalize()
May  5 11:25:20 gandalf ntpd[1879]: ntpd 4.2.4p5-a (1)
May  5 11:25:20 gandalf kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
May  5 11:25:25 gandalf root: /etc/rc.delay: WARNING: failed to start vboxservice
May  5 11:25:29 gandalf dbus[1300]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
May  5 11:25:29 gandalf dbus[1300]: [system] Successfully activated service 'org.freedesktop.UPower'
May  5 11:25:30 gandalf ntpd[1880]: time reset -0.430034 s
May  5 11:25:34 gandalf anacron[2121]: Anacron 2.3 started on 2013-05-05
May  5 11:25:34 gandalf anacron[2121]: Will run job `daily' in 2 min.
May  5 11:25:34 gandalf anacron[2121]: Will run job `daily' in 5 min.
May  5 11:25:34 gandalf anacron[2121]: Will run job `weekly' in 20 min.
May  5 11:25:34 gandalf root: /etc/rc.d/sysctl: WARNING: sysctl hw.dri.debug does not exist.
May  5 11:25:36 gandalf console-kit-daemon[1321]: WARNING: Error waiting for native console 1 activation: Device not configured
May  5 11:25:36 gandalf console-kit-daemon[1321]: WARNING: Error waiting for native console 2 activation: Device not configured
May  5 11:25:36 gandalf console-kit-daemon[1321]: WARNING: Error waiting for native console 9 activation: Device not configured
May  5 11:26:26 gandalf kernel: ugen0.3: <vendor 0x04d9> at usbus0 (disconnected)
May  5 11:26:26 gandalf kernel: ukbd0: at uhub3, port 2, addr 3 (disconnected)
May  5 11:26:26 gandalf kernel: ums0: at uhub3, port 2, addr 3 (disconnected)
May  5 11:26:28 gandalf kernel: ugen0.3: <vendor 0x04d9> at usbus0
May  5 11:26:28 gandalf kernel: ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus0
May  5 11:26:28 gandalf kernel: kbd2 at ukbd0
May  5 11:26:28 gandalf kernel: ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus0
May  5 11:26:42 gandalf login: ROOT LOGIN (root) ON ttyv2
pciconf:
Code:
[root@gandalf] ~# pciconf -lv
hostb0@pci0:0:0:0:      class=0x060000 card=0x20028086 chip=0x01008086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '2nd Generation Core Processor Family DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:       class=0x060400 card=0x20028086 chip=0x01018086 rev=0x09 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:22:0:      class=0x078000 card=0x20028086 chip=0x1c3a8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family MEI Controller'
    class      = simple comms
em0@pci0:0:25:0:        class=0x020000 card=0x20028086 chip=0x15038086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82579V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
ehci0@pci0:0:26:0:      class=0x0c0320 card=0x20028086 chip=0x1c2d8086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
hdac1@pci0:0:27:0:      class=0x040300 card=0x20028086 chip=0x1c208086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib2@pci0:0:28:0:      class=0x060400 card=0x20028086 chip=0x1c108086 rev=0xb5 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:      class=0x060400 card=0x20028086 chip=0x1c168086 rev=0xb5 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
ehci1@pci0:0:29:0:      class=0x0c0320 card=0x20028086 chip=0x1c268086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:      class=0x060100 card=0x20028086 chip=0x1c4a8086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'H67 Express Chipset Family LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci0@pci0:0:31:2:      class=0x010601 card=0x20028086 chip=0x1c028086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none1@pci0:0:31:3:      class=0x0c0500 card=0x20028086 chip=0x1c228086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family SMBus Controller'
    class      = serial bus
    subclass   = SMBus
vgapci0@pci0:1:0:0:     class=0x030000 card=0x83541043 chip=0x0a6510de rev=0xa2 hdr=0x00
    vendor     = 'nVidia Corporation'
    device     = 'GT218 [GeForce 210]'
    class      = display
    subclass   = VGA
hdac0@pci0:1:0:1:       class=0x040300 card=0x83541043 chip=0x0be310de rev=0xa1 hdr=0x00
    vendor     = 'nVidia Corporation'
    device     = 'High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib3@pci0:2:0:0:       class=0x060400 card=0x20028086 chip=0x88921283 rev=0x10 hdr=0x01
    vendor     = 'Integrated Technology Express, Inc.'
    class      = bridge
    subclass   = PCI-PCI
xhci0@pci0:4:0:0:       class=0x0c0330 card=0x20028086 chip=0x01941033 rev=0x04 hdr=0x00
    vendor     = 'NEC Corporation'
    device     = 'uPD720200 USB 3.0 Host Controller'
    class      = serial bus
    subclass   = USB
[root@gandalf] ~#
Was kann ich tun, um die Tastatur direkt nach dem Start ohne Kriecheinlage benutzen zu können?
Wie kann ich herausfinden, was da wärend des Boot-vorgangs falsch läuft?

Mit freundlichen Grüßen
Michael
 

pit234a

Well-Known Member
#2
es gibt da ziemlich günstige Verlängerungen...

Ich täte mal den Single-User Modus probieren und sehen, was da geht. Dann ist das Tastenlayout noch Englisch (das Umstellen ist nicht ganz einfach, ich gehe davon aus, dass kaum einer das macht), aber der große Vorteil wäre, dass auch überhaupt gar keine Dienste laufen, die vielleicht zusätzlich in die Quere kommen könnten.
Sodann täte ich gleiches aus einer Live-Sitzung eines FreeBSD probieren, im Zweifel kann einfach die bootonly gebootet werden und dann die Installation vorzeitig beendet werden. PC-BSD oder so was wäre aber vielleicht auch interessant.

Je nachdem, wie die Ergebnisse aus diesen Tests verlaufen, würde ich dann weiter machen und evtl in meinem installierten System zusätzliche Dinge an USB weglassen und dann sämtliche zusätzlichen Dienste, die etwas mit der Tastatur machen können, zunächst weg schalten und dann nach und nach wieder einschalten. Dabei denke ich vor allem an Hal und dbus.

Ja, und nicht zu vergessen: mal einen anderen Port benutzen. Meist gibt es ja mehrere Steckplätze und vielleicht einfach mal einen benutzen, der möglichst weit weg von dem liegt, den du nun für die Tastatur benutzt.
 

hippodriver

Well-Known Member
Themenstarter #4
Soweit so gut.

USB Legacy war im BIOS aktiviert. Wenn ich mich richtig erinnere, war das nötig, um die Tastatur im Boot-Menü verwenden zu können.

Das Entfernen aller anderen USB devices während das Boot-Vorgangs hat geholfen. Die Tastaur funktioniert dann problemlos. Ich brauche den anderen USB-Kram aber auch.

Am Wochenende versuche ich es mal mit "hw.usb.debug=1". Vielleicht kommt was dabei raus.

Ich will meinen PS2 Anschluß zurück.
 

Yamagi

Possessed With Psi Powers
Mitarbeiter
#5
Dir kann geholfen werden, nachdem ich das gleiche Problem hatte. Die Tatstatur wird als Keyboard und Maus erkannt, sobald sich moused(8) auf das /dev/ums Device legt, blockiert die Eingabe. Rausziehen und einstecken hilft, das moused(8) es irgendwie beim zweiten Mal nicht aufgreift... Ich habe einen Patch gebaut und als PR eingereicht: http://www.freebsd.org/cgi/query-pr.cgi?pr=180657

Das ist ganz klar ein Problem der Firma / Marke Filco. So gut das Keyboard auch sein mag, es darf sich trotzdem nicht als Maus anmelden. Schließlich ist es keine... Der Patch sorgt einfach dafür, dass die Maus ignoriert wird.