Hi,
ich versuche noch immer mein Notebook mit FreeBSD 6.1 zu installieren. Ich habe in dem Notebook 2 80GB SATA Platten drin. Leider scheint das nicht zu gehen.
Ich hatte das hier schon einmal gepostet, da hat man mir geraten mich an Soren Schmidt zu wenden.
Den habe ich auc kontaktiert, aber der sagt: Das muss funktionieren. Ich habe ihm mein dmesg angehängt:
Ich habe auch schon ein FreeBSD 7 Snapshot versucht. Gleicher Fehler.
Ich bekomme beim Setup meine Windows Partition auf ad4 angezeigt, ad6 ist leer und ar0 auch. Wenn ich ad4 und ad6 auswähle, dann bekomme ich immer: A geometry of 155061/16/63 for ad4 is incorrect!
Naja - Soren meint, ich soll mir doch mal einen eigenen Kernel bauen, der nur meine Hardware unterstützt aber ohne usb und sound um weniger Geräte auf dem IRQ 16 zu haben.
Also habe ich die Kernel Sourcen installiert und will jetzt meine Conf Datei anpassen - da sehe ich aber keinen VIA Raid Treiber.
Wie sollte meine Kernel Conf aussehen? Kann mir da mal jemand nen Tip geben?
Dann noch eine andere Frage: Ich sehe es schon so, dass der Fehler bei FreeBSD liegt - sollte man da mal einen BUG-Report erstellen?
BTW:
Suse 10.1 - erkennt den Controller nicht
Ubuntu 6.06 - erkennt den Controller nicht
Fedora Core 5 - läuft ohne Probleme - erkannt das Raid
Gruß
Walzing
ich versuche noch immer mein Notebook mit FreeBSD 6.1 zu installieren. Ich habe in dem Notebook 2 80GB SATA Platten drin. Leider scheint das nicht zu gehen.
Ich hatte das hier schon einmal gepostet, da hat man mir geraten mich an Soren Schmidt zu wenden.
Den habe ich auc kontaktiert, aber der sagt: Das muss funktionieren. Ich habe ihm mein dmesg angehängt:
Code:
embedded 4 0 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 4 0 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 4 0 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 255 0 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 255 0 B 0x62 3 4 5 6 7 10 11 12 14 15
embedded 255 0 C 0x63 3 4 5 6 7 10 11 12 14 15
embedded 255 0 D 0x60 3 4 5 6 7 10 11 12 14 15
embedded 255 0 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 255 0 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 255 0 C 0x60 3 4 5 6 7 10 11 12 14 15
embedded 255 0 D 0x61 3 4 5 6 7 10 11 12 14 15
embedded 255 0 A 0x63 3 4 5 6 7 10 11 12 14 15
embedded 255 0 B 0x60 3 4 5 6 7 10 11 12 14 15
embedded 255 0 C 0x61 3 4 5 6 7 10 11 12 14 15
embedded 255 0 D 0x62 3 4 5 6 7 10 11 12 14 15
embedded 1 3 A 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 7 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 1 5 A 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 4 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 3 0 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 0/9 0/9 0/10 0/10 0/9 0/9 0/9 0/9 0/10 0/9 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2591, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2668, revid=0x04
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base febf8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2660, revid=0x04
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2658, revid=0x04
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000e480, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2659, revid=0x04
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[20]: type 4, range 32, base 0000e800, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265a, revid=0x04
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type 4, range 32, base 0000e880, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x04
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x265c, revid=0x04
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xd4
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2641, revid=0x04
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x04
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x266a, revid=0x04
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: secondary bus 3
pcib1: subordinate bus 3
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfaa00000-0xfeafffff
pcib1: prefetched decode 0xbfe00000-0xdfefffff
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x10de, dev=0x00c8, revid=0xa2
bus=3, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib1: (null) requested memory range 0xc0000000-0xcfffffff: good
map[1c]: type 1, range 64, base fc000000, size 24, enabled
pcib1: (null) requested memory range 0xfc000000-0xfcffffff: good
pcib1: matched entry for 3.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci3: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0xbfc00000-0xbfcfffff
pcib2: prefetched decode 0xbfd00000-0xbfdfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe480-0xe49f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe480
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe800-0xe81f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe880-0xe89f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe880
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 1
pcib3: subordinate bus 1
pcib3: I/O decode 0xc000-0xdfff
pcib3: memory decode 0xfa900000-0xfa9fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib3
pci1: physical bus=1
found-> vendor=0x8086, dev=0x4220, revid=0x05
bus=1, slot=3, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fa9fe000, size 12, enabled
pcib3: (null) requested memory range 0xfa9fe000-0xfa9fefff: good
pcib3: matched entry for 1.3.INTA
pcib3: slot 3 INTA hardwired to IRQ 19
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=1, slot=4, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fa9ff000, size 11, enabled
pcib3: (null) requested memory range 0xfa9ff000-0xfa9ff7ff: good
map[14]: type 1, range 32, base fa9f8000, size 14, enabled
pcib3: (null) requested memory range 0xfa9f8000-0xfa9fbfff: good
pcib3: matched entry for 1.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=1, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b8, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c800, size 8, enabled
pcib3: (null) requested I/O range 0xc800-0xc8ff: in range
map[14]: type 1, range 32, base fa9ffc00, size 8, enabled
pcib3: (null) requested memory range 0xfa9ffc00-0xfa9ffcff: good
pcib3: matched entry for 1.5.INTA
pcib3: slot 5 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3249, revid=0x50
bus=1, slot=7, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 4, enabled
pcib3: (null) requested I/O range 0xdc00-0xdc0f: in range
map[14]: type 4, range 32, base 0000d880, size 4, enabled
pcib3: (null) requested I/O range 0xd880-0xd88f: in range
map[18]: type 4, range 32, base 0000d800, size 4, enabled
pcib3: (null) requested I/O range 0xd800-0xd80f: in range
map[1c]: type 4, range 32, base 0000d480, size 4, enabled
pcib3: (null) requested I/O range 0xd480-0xd48f: in range
map[20]: type 4, range 32, base 0000d400, size 5, enabled
pcib3: (null) requested I/O range 0xd400-0xd41f: in range
map[24]: type 4, range 32, base 0000d000, size 8, enabled
pcib3: (null) requested I/O range 0xd000-0xd0ff: in range
pcib3: matched entry for 1.7.INTA
pcib3: slot 7 INTA hardwired to IRQ 16
pci1: <network> at device 3.0 (no driver attached)
pci1: <serial bus, FireWire> at device 4.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfa9ffc00-0xfa9ffcff irq 19 at device 5.0 on pci1
pcib3: re0 requested I/O range 0xc800-0xc8ff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:03:0d:37:33:fa
re0: [GIANT-LOCKED]
atapci0: <VIA 6421 SATA150 controller> port 0xdc00-0xdc0f,0xd880-0xd88f,0xd800-0xd80f,0xd480-0xd48f,0xd400-0xd41f,0xd000-0xd0ff irq 16 at device 7.0 on pci1
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
atapci0: [MPSAFE]
atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xd000
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x10 bytes for rid 0x10 type 4 at 0xdc00
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x10 bytes for rid 0x14 type 4 at 0xd880
ata3: SATA connect ready time=0ms
ata3: sata_connect devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
ata1: [MPSAFE]
ichsmb0: <SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x400
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
arl: in identify
arl: free mem vector = 0xffff
arl0: not found at 0xc0000
arl0: not found at 0xc2000
arl0: not found at 0xc4000
arl0: not found at 0xc6000
arl0: not found at 0xc8000
arl0: not found at 0xca000
arl0: not found at 0xcc000
arl0: not found at 0xce000
arl0: not found at 0xd0000
arl0: not found at 0xd2000
arl0: not found at 0xd4000
arl0: not found at 0xd6000
arl0: not found at 0xd8000
arl0: not found at 0xda000
arl0: not found at 0xdc000
arl0: not found at 0xde000
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd4000-0xd4fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134104 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669334 hz
Timecounter "TSC" frequency 2008085056 Hz quality 800
Timecounters tick every 1.000 msec
crypto: <crypto device>
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
lo0: bpf attached
rr232x: no controller detected.
md0: Preloaded image </boot/frenzyroot> 2097152 bytes at 0xc0cb41b8
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH6 chip
acd0: setting UDMA33 on ICH6 chip
acd0: <NEC DVD+/-RW ND-6650A/1.42> DVDR drive at ata0 as master
acd0: read 3445KB/s (3445KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 76319MB <FUJITSU MHV2080BH 00000025> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
battery0: battery initialization done, tried 1 times
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
*************** ATA VIA Metadata ****************
magic 0xaa55
dummy_0 0x01
type RAID0
bootable 0
unknown 0
disk_index 0x00
stripe_layout 0x42
stripe_disks 2
stripe_sectors 128
disk_sectors 156301440
disk_id 0x4e08796a
DISK# disk_id
0 0x4e08796a
1 0x31f6796a
checksum 0x93
=================================================
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad6: 76319MB <FUJITSU MHV2080BH 00000028> at ata3-master SATA150
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
GEOM: new disk ad6
ata2: reiniting channel ..
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: reinit done ..
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ata3: reiniting channel ..
ata3: SATA connect ready time=10000ms
ata3: sata_connect devices=0x0
ata3: reinit done ..
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: FAILURE - READ_DMA timed out LBA=156301487
ad6: VIA read metadata failed
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: Adaptec read metadata failed
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: LSI (v3) read metadata failed
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: LSI (v2) read metadata failed
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: FreeBSD read metadata failed
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
pass0 at ata0 bus 0 target 0 lun 0
pass0: <_NEC DVD+-RW ND-6650A 1.42> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 33.000MB/s transfers
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD+-RW ND-6650A 1.42> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 33.000MB/s transfers
cd0: cd present [25277 x 2048 byte records]
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format VIA Tech V-RAID
type RAID0
flags 0x00 0
magic_0 0x000000004e08796a
magic_1 0x0000000000000000
generation 0
total_sectors 312602880
offset_sectors 0
heads 255
sectors 63
cylinders 19458
width 2
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 156301440
disk 1: flags = 0x00 0
=================================================
ar0: 152638MB <VIA Tech V-RAID RAID0 (stripe 64 KB)> status: BROKEN
ar0: 312602880 sectors [19458C/255H/63S] <> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 DOWN no device found for this subdisk
GEOM: new disk cd0
GEOM: new disk ar0
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
md1.uzip: 896 x 130560 blocks
ad6: timeout waiting to issue command
ad6: error issuing READ_DMA command
fuse4bsd: version 0.3.0, FUSE ABI 7.5Ich habe auch schon ein FreeBSD 7 Snapshot versucht. Gleicher Fehler.
Ich bekomme beim Setup meine Windows Partition auf ad4 angezeigt, ad6 ist leer und ar0 auch. Wenn ich ad4 und ad6 auswähle, dann bekomme ich immer: A geometry of 155061/16/63 for ad4 is incorrect!
Naja - Soren meint, ich soll mir doch mal einen eigenen Kernel bauen, der nur meine Hardware unterstützt aber ohne usb und sound um weniger Geräte auf dem IRQ 16 zu haben.
Also habe ich die Kernel Sourcen installiert und will jetzt meine Conf Datei anpassen - da sehe ich aber keinen VIA Raid Treiber.
Wie sollte meine Kernel Conf aussehen? Kann mir da mal jemand nen Tip geben?
Dann noch eine andere Frage: Ich sehe es schon so, dass der Fehler bei FreeBSD liegt - sollte man da mal einen BUG-Report erstellen?
BTW:
Suse 10.1 - erkennt den Controller nicht
Ubuntu 6.06 - erkennt den Controller nicht
Fedora Core 5 - läuft ohne Probleme - erkannt das Raid
Gruß
Walzing
