Folge dem Video um zu sehen, wie unsere Website als Web-App auf dem Startbildschirm installiert werden kann.
Anmerkung: Diese Funktion ist in einigen Browsern möglicherweise nicht verfügbar.
Was die I2C Unterstützung hab ich keine Ahnung bei FreeBSD - bei Linux geht es (--> lm_sensors; HD44780 an PCF8574, gibt aber auch diverse LCD-Module, die schon I2C Bus onboard haben). Code für die LM77 Temperatursensoren gibt es jedenfalls auch für FreeBSD, also sollte I2C prinzipiell kein Problem darstellen.teq schrieb:Hallo,
ich bin gerade auch kurz davor mir ein WRAP board zu kaufen und wollte wissen ob schon jemand von euch Erfahrungen gesammelt hat mit einem I2C LCD Driver an J3 und die Steuerung von FreeBSD aus.
Ich hab das Modul schon hier rumliegen, bisher aber noch nicht eingebaut, da die Bauhöhe des Moduls nicht den Einbau in das Alu-Gehäuse zulässt.Elessar schrieb:Btw, pcengines hat ja jetzt ganz neu *trommelwirbel* auch n USB Modul Nachrüstsatz.
Spielt jemand mit dem Gedanken sich das zuzulegen?
"Schick" finde ich dieses lausige Platinchen nun wirklich nicht, zumal mich ärgert, dass die paar passiven Bauteile nicht gleich auf dem WRAP untergebracht wurden, so dass man einfach nur - wie bei einem PC auch - noch eine USB Buchse dranhängen muss. Mag sein, dass der Grundgedanke der Entwickler war, Dummuser vor Schaden (wg. der ömmeligen 5V Spg.-Versorg.) zu bewahren, aber andererseits sind solche Leute nunmal wirklich nicht die Käuferzielgruppe.Thor95 schrieb:das USB - Modul sieht ja schick aus.... nur ne Verwendung sehe ich momentan dafür nicht....
Die mangelnde Hardwareunterstützung ist halt das grosse Manko von FreeBSD. Ab FreeBSD 5 sieht's schon wieder etwas besser aus, bei WLAN-Karten ist einiges seit der 4er dazu gekommen, zusätzlich könnte zur Not der NDISulator helfen.Thor95 schrieb:Ich bin was das WLAN-MINI-PCI Problem angeht etwas weiter.
Ich hab mal etwas in der Monowall Doku gelesen, naja so wie es aussieht werden nur 2 MiniPCI Karten unterstüzt, die einen AP machen können.
Das ist zum einen auch die DELL TrueMobile 1150....
Da ich sie bei EGay nicht gefunden habe, habe ich mir die jetzt bei Dell direkt bestellt,
ich kann euch sagen, 80 Ökken für ne 10Mbit karte.....das ist Wucher, dafür hätte ich ne Atheros 108Mbit Wlan bekommen, die dann aber meine Monowall nicht erkennen würde....*shit*
Ja, ich nutze die aktuelle Betaversion 1.2b3. Aber zu OpenVPN kann ich sagen, habe ich bisher nicht verwendet.Thor95 schrieb:Hat jemand von euch eigentlich schon das Monowall Beta Wrap Image drauf?
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p10 #2: Tue May 3 21:37:51 CEST 2005
[email]root@router.th.net[/email]:/usr/obj/usr/src/sys/MYKERNEL3
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix GXm (200.46-MHz 586-class CPU)
Origin = "CyrixInstead" Id = 0x540 DIR=0x6443 Stepping=6 Revision=4
real memory = 130023424 (124 MB)
avail memory = 121782272 (116 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 2 Entries> on motherboard
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xda001000-0xda00107f irq 10 at device 14.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:54:6f:01
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xda000000-0xda00007f irq 10 at device 15.0 on pci0
miibus1: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:0a:5e:54:6e:d6
isab0: <PCI-ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 18.1 (no driver attached)
atapci0: <Cyrix 5530 ATA33 controller> port 0xf000-0xf00f at device 18.2 on pci0
atapci0: unable to map interrupt >>>>> dass is scheisse
ata2: channel #0 on atapci0
device_attach: ata2 attach returned 6
pci0: <multimedia, audio> at device 18.3 (no driver attached)
pci0: <display, VGA> at device 18.4 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc9000-0xc97ff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 28667MB <SAMSUNG SV3002H/PV100-11> [58246/16/63] at ata0-master PIO4
Mounting root from ufs:/dev/ad0s1a
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/MYKERNEL,v 1.413.2.6.2.2 2004/10/24 18:02:52 scottl Exp $
machine i386
cpu I586_CPU
ident MYKERNEL3
device npx # Floating point support - do not disable
device loop # Network loopback
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # ehemals 4BSD scheduler - jetzt der neue ULE - höhere Leistung
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
# options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
# options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# Bus support. Do not remove isa, even if you have no isa slots
device apic # I/O APIC
device isa
device eisa
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
# device ataraid # ATA RAID drives !!!!!!!!!!!!!
device atapicd # ATAPI CDROM drives
# device atapifd # ATAPI floppy drives !!!!!!!!!!!!!
# device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
device vga # VGA video card driver
#device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
#device sio # 8250, 16[45]50 based serial ports
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00011078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = 'MediaGXm MMX Cyrix Integrated CPU'
class = bridge
subclass = HOST-PCI
xl0@pci0:14:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
class = network
subclass = ethernet
xl1@pci0:15:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
class = network
subclass = ethernet
isab0@pci0:18:0: class=0x060100 card=0x00000000 chip=0x01001078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = '5530 Kahula/Geode Legacy ISA Bridge'
class = bridge
subclass = PCI-ISA
none0@pci0:18:1: class=0x068000 card=0x00000000 chip=0x01011078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = 'Cx5530 SMI status and ACPI timer'
class = bridge
subclass = PCI-unknown
atapci0@pci0:18:2: class=0x010100 card=0x00000000 chip=0x01021078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = '5530 Kahula/Geode IDE Controller'
class = mass storage
subclass = ATA
none1@pci0:18:3: class=0x040100 card=0x00000000 chip=0x01031078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = '5530 Kahula/Geode Audio'
class = multimedia
subclass = audio
none2@pci0:18:4: class=0x030000 card=0x00011078 chip=0x01041078 rev=0x00 hdr=0x00
vendor = 'Cyrix Corp (Now owned by VIA)'
device = 'Cx5530 Video Controller'
class = display
subclass = VGA
acpi_load="NO"
apm_load="YES"
hw.ata.ata_dma="1"
hw.atamodes=dma
# $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.13 2004/04/01 21:48:31 alfred Exp $
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.ata.0.at="isa"
hint.ata.0.port="0x1F0"
hint.ata.0.irq="14"
hint.ata.1.at="isa"
hint.ata.1.port="0x170"
hint.ata.1.irq="15"
hint.adv.0.at="isa"
hint.adv.0.disabled="1"
hint.bt.0.at="isa"
hint.bt.0.disabled="1"
hint.aha.0.at="isa"
hint.aha.0.disabled="1"
hint.aic.0.at="isa"
hint.aic.0.disabled="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.vt.0.at="isa"
hint.vt.0.disabled="1"
hint.acpi.0.disabled="1"
hint.apm.0.disabled="0"
hint.apm.0.flags="0x20"
hint.pcic.0.at="isa"
# hint.pcic.0.irq="10" # Default to polling
hint.pcic.0.port="0x3e0"
hint.pcic.0.maddr="0xd0000"
hint.pcic.1.at="isa"
hint.pcic.1.irq="11"
hint.pcic.1.port="0x3e2"
hint.pcic.1.maddr="0xd4000"
hint.pcic.1.disabled="1"
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
hint.sio.1.at="isa"
hint.sio.1.port="0x2F8"
hint.sio.1.irq="3"
hint.sio.2.at="isa"
hint.sio.2.disabled="1"
hint.sio.2.port="0x3E8"
hint.sio.2.irq="5"
hint.sio.3.at="isa"
hint.sio.3.disabled="1"
hint.sio.3.port="0x2E8"
hint.sio.3.irq="9"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.ed.0.at="isa"
hint.ed.0.disabled="1"
hint.ed.0.port="0x280"
hint.ed.0.irq="10"
hint.ed.0.maddr="0xd8000"
hint.cs.0.at="isa"
hint.cs.0.disabled="1"
hint.cs.0.port="0x300"
hint.sn.0.at="isa"
hint.sn.0.disabled="1"
hint.sn.0.port="0x300"
hint.sn.0.irq="10"
hint.ie.0.at="isa"
hint.ie.0.disabled="1"
hint.ie.0.port="0x300"
hint.ie.0.irq="10"
hint.ie.0.maddr="0xd0000"
hint.fe.0.at="isa"
hint.fe.0.disabled="1"
hint.fe.0.port="0x300"
hint.lnc.0.at="isa"
hint.lnc.0.disabled="1"
hint.lnc.0.port="0x280"
hint.lnc.0.irq="10"
hint.lnc.0.drq="0"
# Created: Sun Apr 10 20:51:52 2005
apm_enable="YES"
apmd_enable="YES"
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
#REMOVED: ifconfig_xl0="inet 192.168.1.5 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
gateway_enable="YES"
hostname="router.th.net"
ifconfig_xl0="inet 192.168.1.6 netmask 255.255.255.0"
ifconfig_xl1="inet 192.168.1.6 netmask 255.255.255.0"
keymap="german.iso"
linux_enable="YES"
moused_enable="NO"
nfs_client_enable="YES"
nfs_server_enable="YES"
router_enable="YES"
rpcbind_enable="YES"
sshd_enable="YES"
usbd_enable="NO"
Wir verwenden essentielle Cookies, damit diese Website funktioniert, und optionale Cookies, um den Komfort bei der Nutzung zu verbessern.
Siehe weitere Informationen und konfiguriere deine Einstellungen