Hallo,
läuft die Intel Grafik HD 4000 generell mit Xorg unter FreeBSD 10.0? Ich hab hier ein Lenovo T430i vor mir, bei dem Xorg zwar startet, aber anschließend kein Bild anzeigt. Wechsel auf die Konsole ändert Intelgrafikspezifisch erstmal nix daran (ist newsyscons schon in 10 stable?). Lt. Treiberausgabe im Log unten sollte es gehen.
Als Grafiktreiber in /etc/X11/xorg.conf habe ich sowohl intel als auch vesa als Treiber probiert, leider ist das Ergebnis bei beiden das Gleiche.
Ich rufe als User startx auf und der Bildschirm wird und bleibt schwarz. Auch sehe ich keinen fluxbox-Prozeß, der lt. .xinitrc/.xsession (ist ein symlink) gestartet werden sollte.
.xinitrc:
Die einzigen Prozesse sind:
Hab ich nun einen Denkfehler und mir fehlt ein Paket?
Hier noch das Log:
/etc/X11/xorg.conf:
Diese funktioniert auf einem ähnlichen Gerät älterer Generation (Vorgängermodell L420 mit Intel 2nd Generation graphics controller) und wurde per Xorg -configure von dem System so erzeugt. Ich hab allerdings noch den richtigen Treiber eingetragen. Es fehlen hier noch die richtigen Tastaturoptionen, aber erstmal würde ich gerne X sehen und benutzen können.
läuft die Intel Grafik HD 4000 generell mit Xorg unter FreeBSD 10.0? Ich hab hier ein Lenovo T430i vor mir, bei dem Xorg zwar startet, aber anschließend kein Bild anzeigt. Wechsel auf die Konsole ändert Intelgrafikspezifisch erstmal nix daran (ist newsyscons schon in 10 stable?). Lt. Treiberausgabe im Log unten sollte es gehen.
Als Grafiktreiber in /etc/X11/xorg.conf habe ich sowohl intel als auch vesa als Treiber probiert, leider ist das Ergebnis bei beiden das Gleiche.
Ich rufe als User startx auf und der Bildschirm wird und bleibt schwarz. Auch sehe ich keinen fluxbox-Prozeß, der lt. .xinitrc/.xsession (ist ein symlink) gestartet werden sollte.
.xinitrc:
Code:
ulimit -Sp 1024
/usr/local/bin/urxvtd &
exec ssh-agent fluxbox
Die einzigen Prozesse sind:
Code:
1019 v1 S+ 0:00.01 /bin/sh /usr/local/bin/startx
1032 v1 S+ 0:00.00 xinit /home/mpeters/.xinitrc -- /usr/local/bin/X :0 -auth /home/mpeters/.serverauth.1019
1033 v1 S 0:00.58 /usr/local/bin/X :0 -auth /home/mpeters/.serverauth.1019 (Xorg)
Hab ich nun einen Denkfehler und mir fehlt ein Paket?
Hier noch das Log:
Code:
[ 1333.141]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 1333.141] X Protocol Version 11, Revision 0
[ 1333.141] Build Operating System: FreeBSD 10.0-RELEASE amd64
[ 1333.141] Current Operating System: FreeBSD host.name 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 r
oot@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
[ 1333.142] Build Date: 16 February 2014 01:29:37AM
[ 1333.142]
[ 1333.142] Current version of pixman: 0.32.4
[ 1333.142] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1333.142] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1333.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 16 14:28:53 2014
[ 1333.142] (==) Using config file: "/etc/X11/xorg.conf"
[ 1333.143] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 1333.143] (==) ServerLayout "X.org Configured"
[ 1333.143] (**) |-->Screen "Screen0" (0)
[ 1333.143] (**) | |-->Monitor "Monitor0"
[ 1333.143] (**) | |-->Device "Card0"
[ 1333.143] (**) |-->Input Device "Mouse0"
[ 1333.143] (**) |-->Input Device "Keyboard0"
[ 1333.143] (==) Not automatically adding devices
[ 1333.143] (==) Not automatically enabling devices
[ 1333.143] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does not exist.
[ 1333.144] Entry deleted from font path.
[ 1333.144] (**) FontPath set to:
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF/
[ 1333.144] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 1333.144] (II) Loader magic: 0x7b53c0
[ 1333.144] (II) Module ABI versions:
[ 1333.144] X.Org ANSI C Emulation: 0.4
[ 1333.144] X.Org Video Driver: 12.1
[ 1333.144] X.Org XInput driver : 16.0
[ 1333.144] X.Org Server Extension : 6.0
[ 1333.145] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/6553
6
[ 1333.145] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 1333.145] (II) LoadModule: "glx"
[ 1333.145] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 1333.145] (II) Module glx: vendor="X.Org Foundation"
[ 1333.146] compiled for 1.12.4, module version = 1.0.0
[ 1333.146] ABI class: X.Org Server Extension, version 6.0
[ 1333.146] (==) AIGLX enabled
[ 1333.146] (II) Loading extension GLX
[ 1333.146] (II) LoadModule: "record"
[ 1333.146] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
[ 1333.146] (II) Module record: vendor="X.Org Foundation"
[ 1333.146] compiled for 1.12.4, module version = 1.13.0
[ 1333.146] Module class: X.Org Server Extension
[ 1333.146] ABI class: X.Org Server Extension, version 6.0
[ 1333.146] (II) Loading extension RECORD
[ 1333.146] (II) LoadModule: "dbe"
[ 1333.146] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
[ 1333.147] (II) Module dbe: vendor="X.Org Foundation"
[ 1333.147] compiled for 1.12.4, module version = 1.0.0
[ 1333.147] Module class: X.Org Server Extension
[ 1333.147] ABI class: X.Org Server Extension, version 6.0
[ 1333.147] (II) Loading extension DOUBLE-BUFFER
[ 1333.147] (II) LoadModule: "dri2"
[ 1333.147] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
[ 1333.147] (II) Module dri2: vendor="X.Org Foundation"
[ 1333.147] compiled for 1.12.4, module version = 1.2.0
[ 1333.147] ABI class: X.Org Server Extension, version 6.0
[ 1333.147] (II) Loading extension DRI2
[ 1333.148] (II) LoadModule: "dri"
[ 1333.148] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
[ 1333.148] (II) Module dri: vendor="X.Org Foundation"
[ 1333.148] compiled for 1.12.4, module version = 1.0.0
[ 1333.148] ABI class: X.Org Server Extension, version 6.0
[ 1333.148] (II) Loading extension XFree86-DRI
[ 1333.148] (II) LoadModule: "extmod"
[ 1333.148] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
[ 1333.149] (II) Module extmod: vendor="X.Org Foundation"
[ 1333.149] compiled for 1.12.4, module version = 1.0.0
[ 1333.149] Module class: X.Org Server Extension
[ 1333.149] ABI class: X.Org Server Extension, version 6.0
[ 1333.149] (II) Loading extension MIT-SCREEN-SAVER
[ 1333.149] (II) Loading extension XFree86-VidModeExtension
[ 1333.149] (II) Loading extension XFree86-DGA
[ 1333.149] (II) Loading extension DPMS
[ 1333.149] (II) Loading extension XVideo
[ 1333.149] (II) Loading extension XVideo-MotionCompensation
[ 1333.149] (II) Loading extension X-Resource
[ 1333.149] (II) LoadModule: "intel"
[ 1333.150] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 1333.150] (II) Module intel: vendor="X.Org Foundation"
[ 1333.150] compiled for 1.12.4, module version = 2.21.15
[ 1333.150] Module class: X.Org Video Driver
[ 1333.150] ABI class: X.Org Video Driver, version 12.1
[ 1333.150] (II) LoadModule: "mouse"
[ 1333.151] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 1333.151] (II) Module mouse: vendor="X.Org Foundation"
[ 1333.151] compiled for 1.12.4, module version = 1.9.0
[ 1333.151] Module class: X.Org XInput Driver
[ 1333.151] ABI class: X.Org XInput driver, version 16.0
[ 1333.151] (II) LoadModule: "kbd"
[ 1333.152] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 1333.152] (II) Module kbd: vendor="X.Org Foundation"
[ 1333.152] compiled for 1.12.4, module version = 1.8.0
[ 1333.152] Module class: X.Org XInput Driver
[ 1333.152] ABI class: X.Org XInput driver, version 16.0
[ 1333.152] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 1333.154] (--) Using syscons driver with X support (version 2.0)
[ 1333.155] (--) using VT number 9
[ 1333.156] drmOpenDevice: node name is /dev/dri/card0
[ 1333.156] drmOpenDevice: open result is 10, (OK)
[ 1333.156] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1333.156] drmOpenDevice: node name is /dev/dri/card0
[ 1333.156] drmOpenDevice: open result is 10, (OK)
[ 1333.156] drmOpenByBusid: drmOpenMinor returns 10
[ 1333.156] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1333.156] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1333.157] drmOpenDevice: node name is /dev/dri/card0
[ 1333.157] drmOpenDevice: open result is 10, (OK)
[ 1333.157] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1333.157] drmOpenDevice: node name is /dev/dri/card0
[ 1333.157] drmOpenDevice: open result is 10, (OK)
[ 1333.157] drmOpenByBusid: drmOpenMinor returns 10
[ 1333.157] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1333.157] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1333.157] (==) intel(0): RGB weight 888
[ 1333.157] (==) intel(0): Default visual is TrueColor
[ 1333.157] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 1333.157] (**) intel(0): Relaxed fencing enabled
[ 1333.157] (**) intel(0): Wait on SwapBuffers? enabled
[ 1333.157] (**) intel(0): Triple buffering? enabled
[ 1333.157] (**) intel(0): Framebuffer tiled
[ 1333.157] (**) intel(0): Pixmaps tiled
[ 1333.157] (**) intel(0): 3D buffers tiled
[ 1333.157] (**) intel(0): SwapBuffers wait enabled
[ 1333.158] (==) intel(0): video overlay key set to 0x101fe
[ 1333.158] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 1333.158] (II) intel(0): Output VGA1 has no monitor section
[ 1333.368] (II) intel(0): Output HDMI1 has no monitor section
[ 1333.386] (II) intel(0): Output DP1 has no monitor section
[ 1333.396] (II) intel(0): Output HDMI2 has no monitor section
[ 1333.405] (II) intel(0): Output HDMI3 has no monitor section
[ 1333.423] (II) intel(0): Output DP2 has no monitor section
[ 1333.441] (II) intel(0): Output DP3 has no monitor section
[ 1333.441] (II) intel(0): EDID for output LVDS1
[ 1333.441] (II) intel(0): Manufacturer: AUO Model: 313c Serial#: 0
[ 1333.441] (II) intel(0): Year: 2010 Week: 0
[ 1333.441] (II) intel(0): EDID Version: 1.3
[ 1333.441] (II) intel(0): Digital Display Input
[ 1333.441] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1333.441] (II) intel(0): Gamma: 2.20
[ 1333.441] (II) intel(0): No DPMS capabilities specified
[ 1333.441] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1333.441] (II) intel(0): First detailed timing is preferred mode
[ 1333.441] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.340 greenY: 0.570
[ 1333.442] (II) intel(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 1333.442] (II) intel(0): Manufacturer's mask: 0
[ 1333.442] (II) intel(0): Supported detailed timing:
[ 1333.442] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 1333.442] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 1333.442] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 1333.442] (II) intel(0): Unknown vendor-specific block f
[ 1333.442] (II) intel(0): AUO
[ 1333.442] (II) intel(0): B140XTN03.1
[ 1333.442] (II) intel(0): EDID (in hex):
[ 1333.442] (II) intel(0): 00ffffffffffff0006af3c3100000000
[ 1333.442] (II) intel(0): 00140103801f11780a10b59758579226
[ 1333.442] (II) intel(0): 1e505400000001010101010101010101
[ 1333.442] (II) intel(0): 010101010101121b5646500023302616
[ 1333.442] (II) intel(0): 360035ad100000180000000f00000000
[ 1333.442] (II) intel(0): 00000000000000000020000000fe0041
[ 1333.442] (II) intel(0): 554f0a202020202020202020000000fe
[ 1333.442] (II) intel(0): 004231343058544e30332e31200a0026
[ 1333.442] (II) intel(0): EDID vendor "AUO", prod id 12604
[ 1333.442] (II) intel(0): Printing DDC gathered Modelines:
[ 1333.442] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1333.442] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1333.442] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1333.442] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1333.442] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1333.443] (II) intel(0): Printing probed modes for output LVDS1
[ 1333.443] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1333.443] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1333.443] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1333.443] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1333.443] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1333.443] (II) intel(0): EDID for output VGA1
[ 1333.649] (II) intel(0): EDID for output HDMI1
[ 1333.668] (II) intel(0): EDID for output DP1
[ 1333.678] (II) intel(0): EDID for output HDMI2
[ 1333.687] (II) intel(0): EDID for output HDMI3
[ 1333.705] (II) intel(0): EDID for output DP2
[ 1333.723] (II) intel(0): EDID for output DP3
[ 1333.723] (II) intel(0): Output LVDS1 connected
[ 1333.723] (II) intel(0): Output VGA1 disconnected
[ 1333.723] (II) intel(0): Output HDMI1 disconnected
[ 1333.723] (II) intel(0): Output DP1 disconnected
[ 1333.723] (II) intel(0): Output HDMI2 disconnected
[ 1333.723] (II) intel(0): Output HDMI3 disconnected
[ 1333.723] (II) intel(0): Output DP2 disconnected
[ 1333.723] (II) intel(0): Output DP3 disconnected
[ 1333.723] (II) intel(0): Using exact sizes for initial modes
[ 1333.723] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 1333.723] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1333.723] (II) intel(0): Kernel page flipping support detected, enabling
[ 1333.723] (**) intel(0): Display dimensions: (310, 170) mm
[ 1333.723] (**) intel(0): DPI set to (111, 114)
[ 1333.723] (II) Loading sub module "fb"
[ 1333.723] (II) LoadModule: "fb"
[ 1333.724] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 1333.724] (II) Module fb: vendor="X.Org Foundation"
[ 1333.724] compiled for 1.12.4, module version = 1.0.0
[ 1333.724] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1333.724] (II) Loading sub module "dri2"
[ 1333.724] (II) LoadModule: "dri2"
[ 1333.724] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
[ 1333.724] (II) Module dri2: vendor="X.Org Foundation"
[ 1333.724] compiled for 1.12.4, module version = 1.2.0
[ 1333.724] ABI class: X.Org Server Extension, version 6.0
[ 1333.724] (==) Depth 24 pixmap format is 32 bpp
[ 1333.725] (II) intel(0): [DRI2] Setup complete
[ 1333.725] (II) intel(0): [DRI2] DRI driver: i965
[ 1333.725] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 1333.725] (II) UXA(0): Driver registered support for the following operations:
[ 1333.725] (II) solid
[ 1333.725] (II) copy
[ 1333.725] (II) composite (RENDER acceleration)
[ 1333.725] (II) put_image
[ 1333.725] (II) get_image
[ 1333.725] (==) intel(0): Backing store disabled
[ 1333.725] (==) intel(0): Silken mouse enabled
[ 1333.726] (II) intel(0): Initializing HW Cursor
[ 1333.726] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1333.726] (==) intel(0): DPMS enabled
[ 1333.726] (==) intel(0): Intel XvMC decoder enabled
[ 1333.726] (II) intel(0): Set up textured video
[ 1333.726] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1333.726] (II) intel(0): direct rendering: DRI2 Enabled
[ 1333.884] (--) RandR disabled
[ 1333.884] (II) Initializing built-in extension Generic Event Extension
[ 1333.884] (II) Initializing built-in extension SHAPE
[ 1333.884] (II) Initializing built-in extension MIT-SHM
[ 1333.884] (II) Initializing built-in extension XInputExtension
[ 1333.884] (II) Initializing built-in extension XTEST
[ 1333.884] (II) Initializing built-in extension BIG-REQUESTS
[ 1333.884] (II) Initializing built-in extension SYNC
[ 1333.884] (II) Initializing built-in extension XKEYBOARD
[ 1333.884] (II) Initializing built-in extension XC-MISC
[ 1333.884] (II) Initializing built-in extension XINERAMA
[ 1333.884] (II) Initializing built-in extension XFIXES
[ 1333.884] (II) Initializing built-in extension RENDER
[ 1333.884] (II) Initializing built-in extension RANDR
[ 1333.884] (II) Initializing built-in extension COMPOSITE
[ 1333.884] (II) Initializing built-in extension DAMAGE
[ 1333.899] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1333.899] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1333.899] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1333.899] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1333.899] (II) AIGLX: Loaded and initialized i965
[ 1333.899] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1333.900] (II) intel(0): Setting screen physical size to 361 x 203
[ 1333.928] (II) Using input driver 'mouse' for 'Mouse0'
[ 1333.928] (**) Option "CorePointer"
[ 1333.928] (**) Mouse0: always reports core events
[ 1333.928] (**) Option "Protocol" "auto"
[ 1333.928] (**) Option "Device" "/dev/sysmouse"
[ 1333.928] (**) Mouse0: Protocol: "auto"
[ 1333.928] (**) Mouse0: always reports core events
[ 1333.928] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 1333.928] (**) Option "ZAxisMapping" "4 5 6 7"
[ 1333.928] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 1333.928] (**) Mouse0: Buttons: 7
[ 1333.929] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[ 1333.929] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 1333.929] (**) Mouse0: (accel) acceleration profile 0
[ 1333.929] (**) Mouse0: (accel) acceleration factor: 2.000
[ 1333.929] (**) Mouse0: (accel) acceleration threshold: 4
[ 1333.929] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
[ 1333.929] (II) Mouse0: SetupAuto: protocol is SysMouse
[ 1333.929] (II) Using input driver 'kbd' for 'Keyboard0'
[ 1333.929] (**) Option "CoreKeyboard"
[ 1333.929] (**) Keyboard0: always reports core events
[ 1333.929] (**) Keyboard0: always reports core events
[ 1333.929] (**) Option "Protocol" "standard"
[ 1333.929] (**) Option "XkbRules" "base"
[ 1333.929] (**) Option "XkbModel" "pc105"
[ 1333.929] (**) Option "XkbLayout" "us"
[ 1333.929] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
/etc/X11/xorg.conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "3rd Gen Core processor Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Diese funktioniert auf einem ähnlichen Gerät älterer Generation (Vorgängermodell L420 mit Intel 2nd Generation graphics controller) und wurde per Xorg -configure von dem System so erzeugt. Ich hab allerdings noch den richtigen Treiber eingetragen. Es fehlen hier noch die richtigen Tastaturoptionen, aber erstmal würde ich gerne X sehen und benutzen können.