zeigt her eure dmesgs...

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Mon Jan 24 11:34:07 CET 2005
root@aphrodite.arrishq.local:/usr/src/sys/i386/compile/APHRODITE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2500+ (1830.95-MHz 686-class CPU)
Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 516075520 (492 MB)
ACPI APIC Table: <KT400A AWRDACPI>
ioapic0 <Version 0.3> irqs 0-23 on motherboard
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT400A AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link ALKB> irq 0 on acpi0
pci_link1: <ACPI PCI Link ALKA> irq 0 on acpi0
pci_link2: <ACPI PCI Link ALKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link ALKD> irq 0 on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link0: Unable to choose an IRQ
pci_link2: Unable to choose an IRQ
pci_link3: Unable to choose an IRQ
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 18 at device 10.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xeb000000-0xeb0000ff irq 19 at device 11.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:10:a7:10:9a:ef
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xeb001000-0xeb0010ff irq 21 at device 16.3 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm1: <VIA VT8235> port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
pcm1: [GIANT-LOCKED]
pcm1: <Avance Logic ALC650 AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xeb002000-0xeb0020ff irq 23 at device 18.0 on pci0
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:04:61:4a:47:54
acpi_tz0: <Thermal Zone> on acpi0
pci_link4: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link6: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link7: <ACPI PCI Link LNKD> irq 5 on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1830947948 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
ad0: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata0-master UDMA133
ad1: 28629MB <WDC WD300BB-00CCB0/22.04A22> [58168/16/63] at ata0-slave UDMA100
acd0: CDRW <LITE-ON DVDRW LDW-811S/HS09> at ata1-master UDMA33
acd1: DVDROM <LITEON DVD-ROM LTD163/GH5E> at ata1-slave UDMA33
ugen0: at uhub0 port 1 (addr 2) disconnected
All threads purged from ugen0.3
All threads purged from ugen0.2
All threads purged from ugen0.1
All threads purged from ugen0
Trying to mount root from ufs:/dev/ad1s1a
 

SierraX

Well-Known Member
Ok. Hier meine erste.

IBM Thinkpad x20

Code:
NetBSD 2.0 (GENERIC) #0: Wed Dec  1 10:58:25 UTC 2004
	builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 65084 KB
avail memory = 55972 KB
BIOS32 rev. 0 found at 0xfd820
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 338.79 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage Mobility (rev. 0x64)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
cbb0 at pci0 dev 8 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x80)
cbb1 at pci0 dev 8 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0x80)
fxp0 at pci0 dev 10 function 0: i82559S Ethernet, rev 9
fxp0: interrupting at irq 9
fxp0: WARNING: Disabling dynamic standby mode in EEPROM to work around a
fxp0: WARNING: hardware bug.  You must reset the system before using this
fxp0: WARNING: interface.
fxp0: new EEPROM ID: 0x40a1
fxp0: EEPROM checksum @ 0xff: 0x9fd8 -> 0x9fda
fxp0: Ethernet address 00:10:a4:8b:04:aa
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Xircom WinGlobal Modem (serial communications, interface 0x02) at pci0 dev 10 function 1 not configured
clct0 at pci0 dev 11 function 0: Cirrus Logic CS4281 CrystalClear Audio Interface (rev. 0x01)
clct0: interrupting at irq 11
clct0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
clct0: ac97: ext id 200<AMAP>
audio0 at clct0: full duplex, independent
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0
pcmcia1 at cardslot1
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <IC25N020ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 

Yamagi

Possessed With Psi Powers
Teammitglied
@sir_eidrien

Ja ja, ich weiß. Ich hab nur mit Logitech zu viel Ärger gehabt (Garantie abgelaufen, Maus schrott) und außer M$ und Logitech gibt es nunmal keine guten Maushersteller. Außerdem sind die Mäuse das einzige von denen, das was taugt!
 

SierraX

Well-Known Member
hp pavilion k802.de

Obwohl es ein Stangen-PC von HP ist finde ich ihn nicht schlecht. Habe einen neuen Computer für meinen Dad gebraucht (gleich mal 30 Gig für mich abgezwackt ;)). Und bei 500 ¤ (bei Comtech) kann man nix gegen sagen.

Code:
NetBSD 2.0 (GENERIC) #0: Wed Dec  1 10:58:25 UTC 2004
	builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 479 MB
avail memory = 461 MB
BIOS32 rev. 0 found at 0xfb980
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon (686-class), 1998.90 MHz, id 0x6a0
cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3205 (rev. 0x00)
agp0 at pchb0: aperture at 0xd0000000, size 0xf900000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377CE CPU-AGP Bridge (KT600) (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: VIA Technologies product 0x7205 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci0 dev 12 function 0 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci3: interrupting at irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x86)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 (rev 0x60)
auvia0: interrupting at irq 10
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, independent
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:11:09:f6:b3:ab
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 6Y120L0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HP  DVD Writer 630, CNKE26518C, CH16> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

p.s.: sehe gerade das da Athlon als Prozessor angegeben wird. Ist aber ein Sempron
 

SierraX

Well-Known Member
Ersatz fuer abgerauchten dog.sxcastle.de

Vor etwa 3 Monaten hat mein grosser (damaliger Name dog.sxcastle.de) endgültig seinen Dienst verweigert. Jetzt bin ich endlich dazugekommen. Das Board auszutauschen und ihn allgemein ein wenig zu boesen (boese ist eine Tuning-Firma bei uns in der gegend).
Jetzt ist ein MSI K8T-Neo2-F Mainboard, AMD64 3000+ (venice), 512 MB DDR 400 und eine GeForce 6200 in dem Gehäuse.
Neuer Name bullfrog.sxcastle.de.

Code:
NetBSD 2.1_RC6 (GENERIC) #0: Wed Oct 12 17:26:21 UTC 2005
	builds@b2.netbsd.org:/home/builds/ab/netbsd-2-1-RC6/amd64/200510121548Z-obj/home/builds/ab/netbsd-2-1-RC6/src/sys/arch/amd64/compile/GENERIC
total memory = 511 MB
avail memory = 485 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (VIA      K8T400      )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1800.22 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation product 0x0221 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
re0 at pci0 dev 11 function 0: RealTek 8169S Single-chip Gigabit Ethernet
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00e04c, model 0x0011, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: interrupting at ioapic0 pin 16 (irq 11)
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 3)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 3)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, revision 0x86) at pci0 dev 16 function 4 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus2 drive 0: <HDS722516VLAT80>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <_NEC DV-5800C, , D9S2> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <HL-DT-ST DVDRAM GSA-4082B, K3243OE2728, A201> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide1:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
Zuletzt bearbeitet:

Alphatierchen

Meister des Chaos
Hi

Hier mein Server: Bismarck


Code:
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class) 1.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 267952128 (261672K)
avail mem = 237600768 (232032K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(40) BIOS, date 06/21/04, BIOS32 rev. 0 @ 0xfbb40
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde70/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xc1
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 400 ISA" rev 0xa3
"Nvidia nForce2 400 SMBus" rev 0xa1 at pci0 dev 1 function 1 not configured
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 400 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10xl0: reset didn't complete
, address 00:04:75:d3:cb:23
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: reset didn't complete
vge0 at pci1 dev 11 function 0 "VIA VT612x" rev 0x11: irq 11, address 00:50:8d:61:be:c6
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 1
pciide0 at pci0 dev 9 function 0 "Nvidia nForce2 400 IDE" rev 0xa3: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f3fd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
 

-Daemon-

Well-Known Member
So, von mir auch mal was.

Mein Hauptrechner (herdubreid):

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p8 #0: Fri Oct 14 21:44:13 CEST 2005
    pj@herdubreid:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2800+ (2071.04-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1073721344 (1023 MB)
avail memory = 1041154048 (992 MB)
ACPI APIC Table: <ASUS   A7V600-X>
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V600-X> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xa000-0xa0ff,0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x9800-0x980f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 20 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9000-0x901f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x8800-0x881f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x8400-0x841f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xe000-0xe0ff irq 22 at device 17.5 on pci0
pcm0: <Analog Devices AD1888 AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x8000-0x80ff mem 0xde000000-0xde0000ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:52:7a:86
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2071035971 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76319MB <ST380011A/8.01> [155061/16/63] at ata0-master UDMA100
ad1: 190782MB <ST3200822A/3.01> [387621/16/63] at ata0-slave UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A101> at ata1-master PIO4
acd1: DVDROM <TOSHIBA DVD-ROM SDM2012C/TU01> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted

Meine anderen Rechner kommen (Herbstferien, da zur Zeit nur Stress...)
 

simonz

OpenBSD Fanboy
OpenBSD 3.8-current auf meinem Thinkpad 600
Code:
OpenBSD 3.8-current (GENERIC) #191: Thu Oct 13 14:58:02 MDT 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 298 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 133603328 (130472K)
avail mem = 115322880 (112620K)
using 1656 buffers containing 6782976 bytes (6624K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(3a) BIOS, date 05/12/99, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: AC unknown, no battery
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9e30/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "Texas Instruments PCI1250 CardBus" rev 0x02: irq 11
cbb1 at pci0 dev 2 function 1 "Texas Instruments PCI1250 CardBus" rev 0x02: irq 11
vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph NM2160" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-212000>
wd0: 16-sector PIO, LBA, 11509MB, 23572080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SANYO, CRD-S372B, 1.24> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x01 at pci0 dev 7 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efcd netmask efcd ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: battery life expectancy 0%
apm0: AC on, battery charge critical, estimated 0:00 hours
rtw0 at cardbus1 dev 0 function 0 "NETGEAR MA521 802." irq 11
rtw0: ver RTL8180F, radio SA2400A, amp SA2411, address 00:0f:b5:41:bb:55
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
 

dettus

Bicycle User
so, dann will ich nochmal meinen alten thread wiederbeleben:

Code:
OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 MDT 2005
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2683891712 (2620988K)
avail mem = 2293682176 (2239924K)
using 22937 buffers containing 268595200 bytes (262300K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, 2211.58 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201030243Hz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, 2211.33 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff800004510f24, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: apic 2 int 3 (irq 3), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: apic 2 int 11 (irq 11)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "Nvidia nForce4 AC97" rev 0xa2: apic 2 int 12 (irq 12), nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA
pciide1: using apic 2 int 5 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA
pciide2: using apic 2 int 11 (irq 5) for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <Maxtor 6H500F0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide2 channel 1 drive 0: <Maxtor 6H500F0>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
sis0 at pci1 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83815C, apic 2 int 5 (irq 5), address 00:c0:26:f0:ab:35
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function 0 not configured
ppb1 at pci0 dev 11 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
vendor "Nvidia", unknown product 0x0161 (class display subclass VGA, rev 0xa1) at pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 vendor "Nvidia", unknown product 0x0161 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 10
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
pckbc: command timeout

irgendwie funzt die tastatur nicht... und von den 4gig speichern krieg ich auch nur etwas mehr als die haelfte... dooooof...
 

double-p

BOFH
Das ist jetzt zwar nicht reinrassiges BSD.. aber das ist OSX auch nicht.
Und ist ja eh nur Geplauder :->

Code:
System Model: IBM,9117-570
Machine Serial Number: 65B35FC
Processor Type: PowerPC_POWER5
Number Of Processors: 8
Processor Clock Speed: 1504 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 1 65-XXXXX
Memory Size: 15680 MB
Good Memory Size: 15680 MB
Platform Firmware level: Not Available
Firmware Version: IBM,SF230_150
Console Login: enable
Auto Restart: false
Full Core: false
 
Network Information
        Host Name: s96asd01
        IP Address: X
        Sub Netmask: 255.255.255.0
        Gateway: X
        Name Server: X
        Domain Name: X

Paging Space Information
        Total Paging Space: 15744MB
        Percent Used: 17%
 
Volume Groups Information
============================================================================== 
rootvg:
PV_NAME           PV STATE          TOTAL PPs   FREE PPs    FREE DISTRIBUTION
hdisk0            active            546         288         82..00..04..109..93
hdisk1            active            546         322         106..00..14..109..93
============================================================================== 
 
dbvg:
PV_NAME           PV STATE          TOTAL PPs   FREE PPs    FREE DISTRIBUTION
vpath0            active            260         0           00..00..00..00..00
vpath1            active            260         0           00..00..00..00..00
vpath2            active            260         0           00..00..00..00..00
vpath3            active            260         0           00..00..00..00..00
vpath4            active            279         250         56..27..55..56..56
============================================================================== 
 
INSTALLED RESOURCE LIST

  Model Architecture: chrp
  Model Implementation: Multiple Processor, PCI bus
        
+ sys0                                                                          System Object
+ sysplanar0                                                                    System Planar
* pci7             U7879.001.DQD191V-P1                                         PCI Bus
* pci21            U7879.001.DQD191V-P1                                         PCI Bus
* pci22            U7879.001.DQD191V-P1                                         PCI Bus
* pci23            U7879.001.DQD191V-P1                                         PCI Bus
* pci24            U7879.001.DQD191V-P1                                         PCI Bus
* pci6             U7879.001.DQD1AT2-P1                                         PCI Bus
* pci17            U7879.001.DQD1AT2-P1                                         PCI Bus
+ fcs1             U7879.001.DQD1AT2-P1-C1-T1                                   FC Adapter
* fcnet1           U7879.001.DQD1AT2-P1-C1-T1                                   Fibre Channel Network Protocol Device
* fscsi1           U7879.001.DQD1AT2-P1-C1-T1                                   FC SCSI I/O Controller Protocol Device
* hdisk10          U7879.001.DQD1AT2-P1-C1-T1-W50050768014019CD-L0              SAN Volume Controller Device
* hdisk11          U7879.001.DQD1AT2-P1-C1-T1-W50050768014019CD-L1000000000000  SAN Volume Controller Device
* hdisk12          U7879.001.DQD1AT2-P1-C1-T1-W50050768014019CD-L2000000000000  SAN Volume Controller Device
* hdisk13          U7879.001.DQD1AT2-P1-C1-T1-W50050768014019CD-L3000000000000  SAN Volume Controller Device
* hdisk14          U7879.001.DQD1AT2-P1-C1-T1-W50050768014017F6-L0              SAN Volume Controller Device
* hdisk15          U7879.001.DQD1AT2-P1-C1-T1-W50050768014017F6-L1000000000000  SAN Volume Controller Device
* hdisk16          U7879.001.DQD1AT2-P1-C1-T1-W50050768014017F6-L2000000000000  SAN Volume Controller Device
* hdisk17          U7879.001.DQD1AT2-P1-C1-T1-W50050768014017F6-L3000000000000  SAN Volume Controller Device
* hdisk20          U7879.001.DQD1AT2-P1-C1-T1-W50050768014019CD-L4000000000000  SAN Volume Controller Device
* hdisk21          U7879.001.DQD1AT2-P1-C1-T1-W50050768014017F6-L4000000000000  SAN Volume Controller Device
* pci15            U7879.001.DQD1AT2-P1                                         PCI Bus
+ sisscsia2        U7879.001.DQD1AT2-P1                                         PCI-X Ultra320 SCSI Adapter
+ scsi2            U7879.001.DQD1AT2-P1-T12                                     PCI-X Ultra320 SCSI Adapter bus
+ hdisk0           U7879.001.DQD1AT2-P1-T12-L3-L0                               16 Bit LVD SCSI Disk Drive (73400 MB)
+ hdisk1           U7879.001.DQD1AT2-P1-T12-L4-L0                               16 Bit LVD SCSI Disk Drive (73400 MB)
* ses1             U7879.001.DQD1AT2-P1-T12-L15-L0                              SCSI Enclosure Services Device
* pci16            U7879.001.DQD1AT2-P1                                         PCI Bus
* ide0             U7879.001.DQD1AT2-P1-T15                                     ATA/IDE Controller Device
+ cd0              U7879.001.DQD1AT2-P4-D1                                      IDE DVD-ROM Drive
* pci18            U7879.001.DQD1AT2-P1                                         PCI Bus
* pci5             U7879.001.DQD1AT2-P1                                         PCI Bus
* pci11            U7879.001.DQD1AT2-P1                                         PCI Bus
+ ent4             U7879.001.DQD1AT2-P1-C3-T1                                   10/100 Mbps Ethernet PCI Adapter II (1410ff01
)
* pci12            U7879.001.DQD1AT2-P1                                         PCI Bus
+ fcs0             U7879.001.DQD1AT2-P1-C4-T1                                   FC Adapter
* fcnet0           U7879.001.DQD1AT2-P1-C4-T1                                   Fibre Channel Network Protocol Device
* fscsi0           U7879.001.DQD1AT2-P1-C4-T1                                   FC SCSI I/O Controller Protocol Device
* hdisk2           U7879.001.DQD1AT2-P1-C4-T1-W50050768012019CD-L0              SAN Volume Controller Device
* hdisk3           U7879.001.DQD1AT2-P1-C4-T1-W50050768012019CD-L1000000000000  SAN Volume Controller Device
* hdisk4           U7879.001.DQD1AT2-P1-C4-T1-W50050768012019CD-L2000000000000  SAN Volume Controller Device
* hdisk5           U7879.001.DQD1AT2-P1-C4-T1-W50050768012019CD-L3000000000000  SAN Volume Controller Device
* hdisk6           U7879.001.DQD1AT2-P1-C4-T1-W50050768012017F6-L0              SAN Volume Controller Device
* hdisk7           U7879.001.DQD1AT2-P1-C4-T1-W50050768012017F6-L1000000000000  SAN Volume Controller Device
* hdisk8           U7879.001.DQD1AT2-P1-C4-T1-W50050768012017F6-L2000000000000  SAN Volume Controller Device
* hdisk9           U7879.001.DQD1AT2-P1-C4-T1-W50050768012017F6-L3000000000000  SAN Volume Controller Device
* hdisk18          U7879.001.DQD1AT2-P1-C4-T1-W50050768012019CD-L4000000000000  SAN Volume Controller Device
* hdisk19          U7879.001.DQD1AT2-P1-C4-T1-W50050768012017F6-L4000000000000  SAN Volume Controller Device
* pci13            U7879.001.DQD1AT2-P1                                         PCI Bus
* pci14            U7879.001.DQD1AT2-P1                                         PCI Bus
* pci4             U7879.001.DQD1AT2-P1                                         PCI Bus
* pci8             U7879.001.DQD1AT2-P1                                         PCI Bus
+ sisscsia1        U7879.001.DQD1AT2-P1                                         PCI-X Ultra320 SCSI Adapter
+ scsi1            U7879.001.DQD1AT2-P1-T14                                     PCI-X Ultra320 SCSI Adapter bus
* ses0             U7879.001.DQD1AT2-P1-T14-L15-L0                              SCSI Enclosure Services Device
* pci9             U7879.001.DQD1AT2-P1                                         PCI Bus
+ usbhc0           U7879.001.DQD1AT2-P1                                         USB Host Controller (33103500)
+ usbhc1           U7879.001.DQD1AT2-P1                                         USB Host Controller (33103500)
* pci10            U7879.001.DQD1AT2-P1                                         PCI Bus
+ ent2             U7879.001.DQD1AT2-P1-T6                                      2-Port 10/100/1000 Base-TX PCI-X Adapter (141
08902)
+ ent3             U7879.001.DQD1AT2-P1-T7                                      2-Port 10/100/1000 Base-TX PCI-X Adapter (141
08902)
* vio0                                                                          Virtual I/O Bus
* vsa2             U7879.001.DQD1AT2-P1-T1                                      LPAR Virtual Serial Adapter
* vty2             U7879.001.DQD1AT2-P1-T1-L0                                   Asynchronous Terminal
* vsa1             U7879.001.DQD1AT2-P1-T2                                      LPAR Virtual Serial Adapter
* vty1             U7879.001.DQD1AT2-P1-T2-L0                                   Asynchronous Terminal
* vsa0             U9117.570.655156E-V3-C0                                      LPAR Virtual Serial Adapter
* vty0             U9117.570.655156E-V3-C0-L0                                   Asynchronous Terminal
* pci1             U7879.001.DQD191V-P1                                         PCI Bus
* pci26            U7879.001.DQD191V-P1                                         PCI Bus
* pci3             U7879.001.DQD191V-P1                                         PCI Bus
+ sisscsia0        U7879.001.DQD191V-P1                                         PCI-X Ultra320 SCSI Adapter
+ scsi0            U7879.001.DQD191V-P1-T12                                     PCI-X Ultra320 SCSI Adapter bus
* ses3             U7879.001.DQD191V-P1-T12-L15-L0                              SCSI Enclosure Services Device
* pci25            U7879.001.DQD191V-P1                                         PCI Bus
* ide1             U7879.001.DQD191V-P1-T15                                     ATA/IDE Controller Device
* pci27            U7879.001.DQD191V-P1                                         PCI Bus
* pci0             U7879.001.DQD191V-P1                                         PCI Bus
* pci19            U7879.001.DQD191V-P1                                         PCI Bus
+ sisscsia3        U7879.001.DQD191V-P1                                         PCI-X Ultra320 SCSI Adapter
+ scsi3            U7879.001.DQD191V-P1-T14                                     PCI-X Ultra320 SCSI Adapter bus
* ses2             U7879.001.DQD191V-P1-T14-L15-L0                              SCSI Enclosure Services Device
* pci20            U7879.001.DQD191V-P1                                         PCI Bus
+ usbhc2           U7879.001.DQD191V-P1                                         USB Host Controller (33103500)
+ usbhc3           U7879.001.DQD191V-P1                                         USB Host Controller (33103500)
* pci2             U7879.001.DQD191V-P1                                         PCI Bus
+ ent0             U7879.001.DQD191V-P1-T6                                      2-Port 10/100/1000 Base-TX PCI-X Adapter (141
08902)
+ ent1             U7879.001.DQD191V-P1-T7                                      2-Port 10/100/1000 Base-TX PCI-X Adapter (141
08902)
+ L2cache0                                                                      L2 Cache
+ mem0                                                                          Memory
+ proc0                                                                         Processor
+ proc2                                                                         Processor
+ proc4                                                                         Processor
+ proc6                                                                         Processor
+ proc8                                                                         Processor
+ proc10                                                                        Processor
+ proc12                                                                        Processor
+ proc14                                                                        Processor

Happy porting.. :}}}
 

marty

Corsafahrer
Hab mal eben aus dem CVS einen OpenBSD Kernel für eine SGI O2 erstellt:

Code:
NOTE: TLB code too large, using trampolines
[ using 267536 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9-beta (ke) #0: Fri Feb 24 11:18:00 MET 2006
    root@o2.marty44.net:/tmp/ke
real mem = 268435456
rsvd mem = 7020544
avail mem = 228667392
using 2867 buffers containing 13418496 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R5000 CPU rev 2.1 200 MHz with R5000 based FPC rev 1.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB direct
macebus0 at mainbus0: crime rev 10.1
clock0 at macebus0: TOD with DS1687, ticker on int5 using count register
macepcibr0 at macebus0: mace rev 1, host system O2
pci0 at macepcibr0 bus 0
ahc0 at pci0 dev 1 function 0 "Adaptec AIC-7880" rev 0x00: irq 9
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 1 lun 0: <IBM-PSG, DNES-318350Y !#, SA30> SCSI3 0/direct fixed
sd0: 17357MB, 11474 cyl, 10 head, 309 sec, 512 bytes/sec, 35548320 sec total
cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom removable
ahc1 at pci0 dev 2 function 0 "Adaptec AIC-7880" rev 0x00: irq 10
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus1 at ahc1: 16 targets
"DEC 21152 PCI-PCI" rev 0x03 at pci0 dev 3 function 0 not configured
com0 at macebus0: ns16550a, 16 byte fifo
com0: console
com1 at macebus0: ns16550a, 16 byte fifo
mec0 at macebus0: MAC-110 rev 1, address 08:00:69:02:bb:81
nsphy0 at mec0 phy 8: DP83840 10/100 PHY, rev. 1
mavb0 at macebus0: AD1843 rev 1
audio0 at mavb0
boot device: sd0.
root on sd0a
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
rootdev=0x0 rrootdev=0x900 rawdev=0x902
 

Soylent Green

Menschenfleisch
Code:
$ dmesg
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 1072537600 (1047400K)
avail mem = 972058624 (949276K)
using 4278 buffers containing 53731328 bytes (52472K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/20/02, BIOS32 rev. 0 @ 0xf0010
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf47e0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 7
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 9
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x81
pci2 at ppb1 bus 2
twe0 at pci2 dev 0 function 0 "3ware Escalade IDE RAID" rev 0x01: irq 10
twe0: Escalade V1.3
scsibus0 at twe0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <3WARE, Host drive #00, > SCSI2 0/direct fixed
sd0: 239371MB, 30515 cyl, 255 head, 63 sec, 512 bytes/sec, 490232704 sec total
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81: irq 11, address 00:07:e9:be:91:5f
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
vga1 at pci2 dev 12 function 0 "Matrox MGA 1064SG 220MHz" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci2 dev 14 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq 11, address: 00:02:b3:eb:65:fa
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8162B, 0015> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445372 (Analog Devices AD1981A)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: Genesys Logic USB TO IDE, rev 2.00/0.33, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd1 at scsibus2 targ 1 lun 0: <WDC WD20, 00BB-00GUC0, 0811> SCSI0 0/direct fixed
sd1: 190782MB, 190782 cyl, 64 head, 32 sec, 512 bytes/sec, 390721968 sec total
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
auich0: measured ac97 link rate at 48000 Hz

und noch einer:

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #9: Tue Feb 14 20:33:00 CET 2006
    root@hagbard.only640k.org:/usr/obj/usr/src/sys/LAPTOP7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (798.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1064173568 (1014 MB)
avail memory = 1032318976 (984 MB)
wlan: mac acl policy registered
ichwd module loaded
lockmgr: thread 0xc08595e0 unlocking unheld lock
KDB: stack backtrace:
kdb_backtrace(c07f61ed,c08595e0,c08665cc,c0c20cec,c05b0827) at kdb_backtrace+0x2e
lockmgr(c08665a8,6,c08665cc,c08595e0,c0c20d28) at lockmgr+0x672
smb_co_unlock(c08665a0,0,c08595e0,c08595e0,c0c20d48) at smb_co_unlock+0x2c
smb_sm_init(c0c20d48,c05b3b4f,c4a5e12c,c0803ff3,c4a5e100) at smb_sm_init+0x4a
nsmb_dev_load(c4a5e100,0,0,c04f699b,c0856c18) at nsmb_dev_load+0x1d
module_register_init(c083e844,c1e000,c1ec00,c1e000,0) at module_register_init+0x81
mi_startup() at mi_startup+0xb5
begin() at begin+0x2c
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-70> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0x90080000-0x900fffff,0xb0000000-0xbfffffff,0x90000000-0x9003ffff irq 11 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0x90080000 0MB
info: [drm] Initialized i915 1.2.0 20041217
vgapci1: <VGA-compatible display> at device 2.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5751M Gigabit Ethernet, ASIC rev. 0x4101> mem 0x90100000-0x9010ffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:c6:ce:ea:2c
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0x90040000-0x900403ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib3
cbb0: <TI1510 PCI-CardBus Bridge> mem 0x90300000-0x90300fff irq 11 at device 0.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0x90301000-0x90301fff irq 11 at device 2.0 on pci4
iwi0: Ethernet address: 00:15:00:1d:d9:f0
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0x90040800-0x900409ff,0x90040400-0x900404ff irq 11 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 8250 or not responding
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd1000-0xd1fff,0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 798057936 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <TOSHIBA MK4026GAX RoHS PA107E> at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/1.04> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4241N 1.04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
 

Yamagi

Possessed With Psi Powers
Teammitglied
@Dettus
Du hast einen nforce4 mit 4 GB RAM. Um den vollständig zu sehen, musst du im BIOS das Memoryhole wie folgt einstellen:

C0-Stepping CPU:
Mode: Software
Size: Auto

E-Stepping (alles was nicht C0 ist):
Mode: Hardware
Size: Manuel - So klein wie möglich. Wenn es zu klein ist, wird er nicht mehr alle Geräte erkennen.

Wenn das nichts hilft, kommst du evetuell weiter indem du mit den Einstellungen für das Memoryhole etwas rumexperimentierst. Auch ein Zusammenhang zwischen Option Rom und zu wenig Speicher wird in Foren häufig diskutiert. Außerdem kann es angeblich helfen, den RAM in die Bänke 2 und 3 zu stecken...
 

dettus

Bicycle User
leider gibt es die option co- und e-stepping in meinem bios nicht ;-(

ich bin mir mittlerweile aber auch 100% sicher dass es am memory-hole liegt.

das einzige, was ich 4g-maessig in meinem bios einstellen kann ist, ob er die 4gb ummappen soll oder nicht. wenn ich das auf disable stelle sagt mir auch der bootloader nur noch etwas von 2,5gb.

fruuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuustrierend.

EDIT: es ist definitiv ein kernel-problem.
 
Zuletzt bearbeitet:

Yamagi

Possessed With Psi Powers
Teammitglied
Nur der Vollständigkeit halber: Das Stepping (C0 oder Ex) ist kein BIOS-Feature, sondern gibt die Revision des CPU-Kerns an. Man kann es mit Tools oder durch das OS auslesen lassen, alternativ ergibt es sich aus der Beschriftung der CPU. Siehe dazu auch hier: http://fab51.com
 

-Daemon-

Well-Known Member
So, hier dann mal die dmesg von meinem FreeBSD 6-stable Rechner:

Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #1: Sun Feb 12 17:35:13 CET 2006
    root@askja.intern.smo.de:/usr/obj/usr/src/sys/ASKJAKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (349.96-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory  = 134152192 (127 MB)
avail memory = 117551104 (112 MB)
ACPI disabled by blacklist.  Contact your BIOS vendor.
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe8000000-0xebffffff at d
evice 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
nvidia0: <GeForce FX 5200> mem 0xec000000-0xecffffff,0xe0000000-0xe7ffffff irq 1
1 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 5 at dev
ice 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xf0000000-0xf000
007f irq 9 at device 10.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:5f:b5:ba
amd0: <Tekram DC390(T)/AMD53c974 SCSI Host Adapter> port 0xe800-0xe87f irq 5 at 
device 11.0 on pci0
amd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd1fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 349961198 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 6204MB <Seagate ST36531A 3.29> at ata0-master UDMA33
acd0: CDROM <GCD-R580B/1.05> at ata1-master PIO3
Waiting 15 seconds for SCSI devices to settle
Trying to mount root from ufs:/dev/ad0s1a

Gruß,
Philipp
 

danlei

Well-Known Member
FreeBSD 6.0 rel.

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #0: Sun Feb 12 18:52:46 CET 2006
    root@artemis.dl:/usr/obj/usr/src/sys/LEIDISCHKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (701.24-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268435456 (256 MB)
avail memory = 253222912 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xe0000000-0xe0ffffff,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <Creative CT5880-A> port 0xdc00-0xdc3f irq 10 at device 12.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pcm0: [GIANT-LOCKED]
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0xe000-0xe0ff mem 0xe3400000-0xe34000ff irq 11 at device 14.0 on pci0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 16
adv0: [GIANT-LOCKED]
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe3401000-0xe34010ff irq 10 at device 16.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0a:cd:0b:45:05
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
uhub1: vendor 0x0409 product 0x55ab, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, bus powered
ukbd0: Alps Electric M2452, rev 1.00/1.01, addr 3, iclass 3/1
kbd1 at ukbd0
Timecounter "TSC" frequency 701237370 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 19536MB <Seagate ST320423A 3.02> at ata0-master UDMA66
ad1: 19458MB <IBM DTLA-305020 TWEHA60A> at ata0-slave UDMA66
acd0: DVDROM <IDE DVD-ROM 16X/VER 7.50> at ata1-master UDMA33
Waiting 5 seconds for SCSI devices to settle
cd0 at adv0 bus 0 target 1 lun 0
cd0: <SCSI-CD ReWritable-2x2x6 2.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a

Vielleicht weis ja jemand von Euch, was es mit diesen "can't assign resources" Zeilen auf sich hat? Habe zwar keine Ahnung was es ist, aber auch noch keine Probleme bemerkt.
 

-Daemon-

Well-Known Member
aspiring schrieb:
...
Vielleicht weis ja jemand von Euch, was es mit diesen "can't assign resources" Zeilen auf sich hat? Habe zwar keine Ahnung was es ist, aber auch noch keine Probleme bemerkt.
Hast du 'ne GeForce-Karte in dem Rechner drin? Ich hab naemlich eine in meinem Testrechner drin (der Post ueber deinem) und das gleiche Problem... ;) Es stoert zwar nicht im praktischen Betrieb, aber im Unterbewussten juckts mich dann doch das zu beseitigen. :)

dmesg von meinem Hauptarbeitsrechner:
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #0: Wed Feb 22 20:16:49 CET 2006
    pj@herdubreid.intern.smo.de:/usr/obj/usr/src/sys/HERDUBREIDKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2800+ (2071.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory  = 1073721344 (1023 MB)
avail memory = 1041833984 (993 MB)
ACPI APIC Table: <ASUS   A7V600-X>
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V600-X> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 3 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 5 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 15 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f,0xa000-0xa0ff at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x9800-0x980f irq 20 at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9000-0x901f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x8800-0x881f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x8400-0x841f at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xde800000-0xde8000ff at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xe000-0xe0ff at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1888 AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x8000-0x80ff mem 0xde000000-0xde0000ff at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:52:7a:86
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd6fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub5: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub5: 3 ports with 2 removable, bus powered
ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 2071034643 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380011A 8.01> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A101> at ata1-master UDMA33
acd1: DVDROM <TOSHIBA DVD-ROM SDM2012C/TU01> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad0s1a

Gruss,
Philipp
 

danlei

Well-Known Member
Ja, GForce 4.

Stimmt, ist das gleiche bei Dir. Leider kann ich Dir garnicht weiterhelfen. Ich hab die Karte vor kurzem geschenkt bekommen -- vielleicht interessiert es Dich, dass ich bei ner TNT 2 genau das gleiche Problem hatte.

Wie gesagt, mich nervts auch -- zum Glück scheint es keine Konsequenzen zu haben! :)
 

xbit

Well-Known Member
und hier meine.... ;) AMD64 3000+, 1 GB RAM, nForce 3

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #15: Fri Feb  3 08:38:47 CET 2006
    root@insomnia.shadow.local:/usr/obj/usr/src/sys/INSOMNIA
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 1073676288 (1023 MB)
avail memory = 1028403200 (980 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 9 on acpi0
pci_link4: <ACPI PCI Link LNK5> irq 9 on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 11 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 11 on acpi0
pci_link7: <ACPI PCI Link LMAC> on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> irq 10 on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 11 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link LSID> on acpi0
pci_link17: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link18: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link19: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link20: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link21: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link22: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link23: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link30: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link32: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link33: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link34: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link35: <ACPI PCI Link APSJ> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci_link29: BIOS IRQ 10 for -2145957464.1.INTA is invalid
pci_link23: BIOS IRQ 11 for -2145957464.2.INTA is invalid
pci_link24: BIOS IRQ 11 for -2145957464.2.INTB is invalid
pci_link30: BIOS IRQ 11 for -2145957464.2.INTC is invalid
pci_link35: BIOS IRQ 11 for -2145957464.10.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xf2000000-0xf3ffffff at device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfc001000-0xfc001fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfc002000-0xfc002fff irq 21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xc400-0xc40f,0xc800-0xc87f irq 20 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <Matrox G400/G450 (AGP)> mem 0xf4000000-0xf5ffffff,0xf6000000-0xf6003fff,0xf7000000-0xf77fffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xf2000000 32MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link20: BIOS IRQ 20 for 0.10.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem 0xfa000000-0xfa00007f irq 18 at device 6.0 on pci2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:3e:d7:2f
pci2: <simple comms> at device 7.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0x9800-0x981f irq 16 at device 8.0 on pci2
pcm0: <TriTech TR28023 AC97 Codec>
bktr0: <BrookTree 878> mem 0xfb000000-0xfb000fff irq 17 at device 9.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Hauppauge Model 44354 B121
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control.
pci2: <multimedia> at device 9.1 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc87ff,0xd4000-0xd47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: vendor 0x0a12 product 0x0001, rev 2.00/15.93, addr 2
Timecounter "TSC" frequency 1808811494 Hz quality 800
Timecounters tick every 4.000 msec
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDROM <PLEXTOR DVD-ROM PX-130A/1.01> at ata0-master UDMA33
acd1: DVDR <DVDR PX-750A/1.01> at ata0-slave UDMA66
acd2: CDRW <CD-W540E/1.0C> at ata1-master UDMA33
ad4: 76319MB <WDC WD800JD-00LSA0 06.01D06> at ata2-master SATA150
hwpmc: TSC/1/0x20<REA> K8/4/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Trying to mount root from ufs:/dev/ad4s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC CD-W540E 1.0C> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 0 lun 0
cd1: <PLEXTOR DVD-ROM PX-130A 1.01> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd2 at ata0 bus 0 target 1 lun 0
cd2: <PLEXTOR DVDR   PX-750A 1.01> Removable CD-ROM SCSI-0 device 
cd2: 66.000MB/s transfers
cd2: cd present [2295104 x 2048 byte records]
 

Athaba

Libellenliebhaber
Das ist jetzt aber peinlich...
Hab grad kein DragonFly, weil ich mir mal das 6er FreeBSD angucken wollte.
Dann eben noch eine dmesg, von einem fast frischen FreeBSD.
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE-SNAP011 #2: Sun Feb 19 18:23:58 CET 2006
    reezer@cabal.netzwerk:/usr/obj/usr/src/sys/CABALKERNEL
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.66GHz (2899.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000000<LM>
real memory  = 1073414144 (1023 MB)
avail memory = 1037299712 (989 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xfd000000-0xfdffffff,0xe0000000-0xe7ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xc000-0xc07f mem 0xfebff800-0xfebff87f irq 19 at device 11.0 on pci0
xl0: selecting 10baseT transceiver, half duplex
xl0: Ethernet address: 00:50:04:3c:d9:5c
atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd807,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc80f,0xc400-0xc4ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xe800-0xe8ff irq 22 at device 17.5 on pci0
pcm0: <C-Media Electronics CMI9761 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 2899937680 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-1300A/1.08> at ata1-slave UDMA33
ad4: 190782MB <WDC WD2000JS-00MHB0 02.01C03> at ata2-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
session in wrong state
session in wrong state
Wah, die is hässlich *g*
 
Oben