Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Tue Mar 28 14:11:33 CEST 2006
root@hellknight.horst.lan:/usr/src/sys/amd64/compile/HELLKNIGHT
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 265 (1808.34-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 5637144576 (5376 MB)
avail memory = 4110221312 (3919 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xb0000000-0xb0000fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xb0001000-0xb00010ff irq 21 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub1: device problem (SHORT_XFER), disabling port 8
pcm0: <nVidia nForce4> port 0x1800-0x18ff,0x1400-0x14ff mem 0xb0002000-0xb0002fff irq 22 at device 4.0 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c10-0x1c1f mem 0xb0003000-0xb0003fff irq 23 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> irq 16 at device 5.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:24:15:fb
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:24:15:fb
fwe0: Ethernet address: 02:e0:81:24:15:fb
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0x1c38-0x1c3f mem 0xb0004000-0xb0004fff irq 20 at device 10.0 on pci0
nve0: Ethernet address 00:e0:81:57:42:c2
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:e0:81:57:42:c2
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci8: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pci9: <ACPI PCI bus> on pcib4
pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pci10: <ACPI PCI bus> on pcib5
pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
nve1: <NVIDIA nForce MCP9 Networking Adapter> port 0x2000-0x2007 mem 0xd0401000-0xd0401fff irq 17 at device 10.0 on pci128
nve1: Ethernet address 00:e0:81:57:42:c3
miibus1: <MII bus> on nve1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve1: Ethernet address: 00:e0:81:57:42:c3
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pci129: <ACPI PCI bus> on pcib7
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0-0x7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd07ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: vendor 0x04e1 product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: WACOM CTE-440-U V4.0-3, rev 1.10/4.03, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums1: PRIMAX Cherry USB Mouse, rev 2.00/1.10, addr 4, iclass 3/1
ums1: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 238475MB <Seagate ST3250824AS 3.AAD> at ata2-master SATA300
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW SH-W162C TS10> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad0s2a
kldload: Unsupported file type
nve0: device timeout (10)