zeigt her eure dmesgs...

aspiring schrieb:
FreeBSD 6.0 rel.
Vielleicht weis ja jemand von Euch, was es mit diesen "can't assign resources" Zeilen auf sich hat? Habe zwar keine Ahnung was es ist, aber auch noch keine Probleme bemerkt.
Versuche doch mal acpi zu aktivieren. Bei mir sind diese Meldungen auf einer Uralt-Kiste nur mit deaktiviertem acpi aufgetaucht.

Grüße
-MadMax
 
Kleines, aber feines Rechnerchen...

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Fri Jan 13 21:29:00 CET 2006
    root@xris.fu41.vpn:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536854528 (511 MB)
avail memory = 515936256 (492 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P3B_F> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <Matrox G550 (AGP)> mem 0xe2000000-0xe3ffffff,0xe1000000-0xe1003fff,0xe0800000-0xe0ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe4000000 64MB
info: [drm] Initialized mga 3.2.1 20051102
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 4.1 (no driver attached)
pci0: <serial bus, USB> at device 4.2 (no driver attached)
pci0: <bridge> at device 4.3 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe0000000-0xe000007f irq 14 at device 9.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:ad:46:f3
pcm0: <AudioPCI ES1371-A> port 0xb800-0xb83f irq 15 at device 10.0 on pci0
pcm0: <TriTech TR28023 AC97 Codec>
pcm0: <Playback: DAC2 / Record: ADC>
ahc0: <Adaptec 29160B Ultra160 SCSI adapter> port 0xb400-0xb4ff mem 0xdf800000-0xdf800fff irq 10 at device 11.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
vx0: <3COM 3C590 Etherlink III PCI> port 0xb000-0xb01f irq 14 at device 13.0 on pci0
utp[*utp*]vx0: Ethernet address: 00:a0:24:4b:76:0d
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xdf000000-0xdf000fff irq 15 at device 14.0 on pci0
ahc1: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xd4000-0xd47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 801821343 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K2-TY092L DDD6> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 8759MB (17938985 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K2-TY092L DDD6> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 8759MB (17938985 512 byte sectors: 255H 63S/T 1116C)
cd0 at ahc1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R   PX-W124TS 1.07> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ahc1 bus 0 target 1 lun 0
cd1: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc0 bus 0 target 2 lun 0
da2: <COMPAQPC ST318452LW 3C02> Fixed Direct Access SCSI-2 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da3: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Trying to mount root from ufs:/dev/da0s1a

Grüße
-MadMax
 
MadMax schrieb:
Versuche doch mal acpi zu aktivieren. Bei mir sind diese Meldungen auf einer Uralt-Kiste nur mit deaktiviertem acpi aufgetaucht.
Ich hab das gleiche Problem. Ich dachte auch es liegt am ACPI, aber da das BIOS bei mir eine solche Option nicht zulaesst, muss es an was anderem liegen... ;)

Gruss,
Philipp
 
Hehe, mein iBook :)

Code:
standard timeslicing quantum is 10000 us
vm_page_bootstrap: 156502 free pages
mig_table_max_displ = 68
IOKit Component Version 7.9:
Wed Mar 30 20:07:52 PST 2005; root(rcbuilder):RELEASE_PPC/iokit/RELEASE
84 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

using 1638 buffer headers and 1638 cluster IO buffer headers
Local FireWire GUID = 0xa95ff:0xfeb1596e
ADB present:8c
Security auditing service present
BSM auditing present
From path: "/pci@f4000000/ata-6@D/@0:9,\\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci@f4000000/ata-6@D/@0:9</string></dict>
Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK3021GAS Media/IOApplePartitionScheme/Untitled@9
BSD root: disk0s9, major 14, minor 9
Jettisoning kernel linker.
Resetting IOCatalogue.
Matching service count = 0
AppleRS232Serial:        0        0 AppleRS232Serial::start - returning false early, Connector or machine incorrect
PRAM: BootBeepVolume property set to 0.
UniNEnet: Ethernet address 00:0a:95:b1:59:6e
AirPortPCI: Ethernet address 00:0a:95:f7:0a:cf
IOFireWireIP: FireWire address 00:0a:95:ff:fe:b1:59:6e
ATY,Via_A: vram [9c000000:02000000]
ATY,Via_B: vram [98000000:02000000]
PRAM: BootBeepVolume property set to 0.
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
IPv6 packet filtering initialized, default to accept, logging disabled
IP firewall loaded
AirPort:  Link Active:  "hrz" - 000ed763cef0 - chan 6
com.cisco.nke.ipsec: attached or made active, interface: (en1).
AirPort:  Link Active:  "hrz" - 000b855a661f - chan 6
AppleNMI mask NMI
AirPort:  Link DOWN (Client disAssoc 0)
com.cisco.nke.ipsec: removed or detactivated interface: (en1).
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link Active:  "hrz" - 000ed763cb60 - chan 6
com.cisco.nke.ipsec: attached or made active, interface: (en1).
com.cisco.nke.ipsec: removed or detactivated interface: (en0).
 
so hier noch mal mein einer, der andere kommt spaeter...
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #4: Tue Jan 24 01:42:46 UTC 2006
    ben@speedy.homenetwork:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2672.74-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 2146304000 (2046 MB)
avail memory = 2091139072 (1994 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNK0> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNK1> irq 5 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce 6600 GT> mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9000-0x901f mem 0xfb000000-0xfb01ffff irq 18 at device 1.0 on pci2
em0: Ethernet address: 00:11:2f:03:4d:c3
em0:  Speed:N/A  Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb200000-0xfb2003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Promise PDC20378 SATA150 controller> port 0xa000-0xa03f,0xa400-0xa40f,0xa800-0xa87f mem 0xfb120000-0xfb120fff,0xfb100000-0xfb11ffff irq 23 at device 4.0 on pci3
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xc000-0xc007,0xc400-0xc403,0xc800-0xc807,0xcc00-0xcc03,0xd000-0xd00f irq 18 at device 31.2 on pci0
atapci2: failed to enable memory mapping!
ata5: <ATA channel 0> on atapci2
ata6: <ATA channel 1> on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd8ff,0xdc00-0xdc3f mem 0xfb201000-0xfb2011ff,0xfb202000-0xfb2020ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <ASUS DRW-0402P/D/1.05> at ata1-master UDMA33
ad4: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata2-master SATA150
ad6: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata3-master SATA150
ad10: 117246MB <Maxtor 6Y120M0 YAR51BW0> at ata5-master SATA150
ad10: Intel calc=34268be4 meta=1a1345f2
ad12: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata6-master SATA150
ar0: 155448MB <Promise Fasttrak RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
ar1: WARNING - mirror protection lost. RAID1 array in DEGRADED mode
ar1: 117246MB <Intel MatrixRAID RAID1> status: DEGRADED
ar1: disk0 READY (master) using ad10 at ata5-master
ar1: disk1 DOWN no device found for this subdisk
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ad10s1a
ach ja, weis jemand wo das herkommt:
Code:
atapci2: failed to enable memory mapping!
Gruss!
 
Code:
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1396.67 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: "Intel(R) Celeron(R) M processor         1.40GHz"
cpu0: using thermal monitor 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2590 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel product 0x2591 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x5460 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci3: interrupting at irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
bce0 at pci2 dev 0 function 0: Broadcom BCM4401-B0 10/100 Ethernet
bce0: interrupting at irq 9
bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:14:22:e1:32:b1
cbb0 at pci2 dev 1 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xb3)
Ricoh 5C552 PCI-CardBus bridge/Firewire (Firewire serial bus, interface 0x10, revision 0x08) at pci2 dev 1 function 1 not configured
Ricoh product 0x0822 (system subclass 0x05, interface 0x01, revision 0x17) at pci2 dev 1 function 2 not configured
iwi0 at pci2 dev 3 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 10
iwi0: 802.11 address 00:13:ce:d3:2f:db
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 7
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: SigmaTel unknown (0x83847652) codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
auich0: ac97: ext id a01<AC97_23,AMAP,VRA>
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB RECEIVER, rev 1.10/25.10, addr 2, iclass 3/1
ums0 at uhidev0: 7 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <SAMSUNG MP0603H>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SONY DVD+/-RW DW-Q58A, , UDS1> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
Meine momentane Haupt-Workstation:

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #3: Sun Jan 15 14:12:27 CET 2006
    snafu@fuckup.lan:/usr/src/sys/i386/compile/maya
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: mobile AMD Athlon(tm) XP-M (LV) 2600+ (1999.94-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
real memory  = 805240832 (767 MB)
avail memory = 774504448 (738 MB)
ACPI APIC Table: <AMIINT SiS740XX>
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS740XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xdc00-0xdcff,0xd800-0xd87f irq 18 at device 2.7 on pci0
pcm0: <C-Media Electronics CMI9761 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcffff000-0xcfffffff irq 23 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
bktr0: <BrookTree 878> mem 0xcdcfe000-0xcdcfefff irq 18 at device 10.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
pci0: <multimedia> at device 10.1 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xcfffcf80-0xcfffcfff irq 16 at device 12.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:3e:e8:32
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xcfffce00-0xcfffceff irq 17 at device 13.0 on pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:84:7a:a1:a6
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: Razer Razer Diamondback Optical Mouse, rev 2.00/1.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
uhub3: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub3: 3 ports with 2 removable, bus powered
ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
kbd1 at ukbd0
Timecounter "TSC" frequency 1999940272 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master UDMA100
acd0: DVDROM <IDE DVD-ROM 16X/VER 7.50> at ata1-master UDMA33
acd1: CDRW <ASUS CRW-4816A/1.0> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <IDE DVD-ROM 16X 7.50> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <ASUS CRW-4816A 1.0> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed

Gruss
 
Hier mal mein kleiner Server:
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p5 #0: Mon Mar  6 18:32:11 CET 2006
    root@:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (199.31-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 150994944 (144 MB)
avail memory = 138248192 (131 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
de0: <Digital 21041 Ethernet> port 0x6000-0x607f mem 0xe0801000-0xe080107f irq 9 at device 10.0 on pci0
de0: 21041 [10Mb/s] pass 2.1
de0: Ethernet address: 00:80:c8:55:86:b1
rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe0800000-0xe08000ff irq 12 at device 11.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:84:3c:c3:63
pci0: <display, VGA> at device 12.0 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address: 00:a0:24:6c:62:6b
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
ata2: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee-0x3ef irq 11 on isa0
Timecounter "TSC" frequency 199309672 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 1226MB <QUANTUM BIGFOOT1280A A01.03> at ata0-master WDMA2
acd0: CDROM <FX140S/e12> at ata0-slave PIO3
ad2: 38166MB <WDC WD400BB-00DEA0 05.03E05> at ata1-master WDMA2
ad3: 1222MB <WDC AC11200L 24.39E26> at ata1-slave WDMA2
Trying to mount root from ufs:/dev/ad0s1a

unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
<-- das wird beim nächsten mal aufschrauben gelöst. ^^
 
@dark_angel: Setz dich bitte mir in Verbindung wenn du irgendwas zu dem Problem rausgefunden hast. Danke. :)
 
Mein kleiner VIA EPIA 5000 mit GENERIC Kernel. :D

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C3 Samuel 2 (533.36-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x673  Stepping = 3
  Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory  = 534708224 (509 MB)
avail memory = 513908736 (490 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA601 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 3 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8231 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe800-0xe80f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 10 at device 17.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 17.4 (no driver attached)
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xe4000000-0xe40000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:63:c0:a4:00
pcib2: <PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib2
ste0: <D-Link DL10050 10/100BaseTX> port 0xc000-0xc07f irq 11 at device 4.0 on pci2
miibus1: <MII bus> on ste0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ste0: Ethernet address: 00:0d:88:53:10:10
ste1: <D-Link DL10050 10/100BaseTX> port 0xc400-0xc47f irq 3 at device 5.0 on pci2
miibus2: <MII bus> on ste1
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ste1: Ethernet address: 00:0d:88:53:10:11
ste2: <D-Link DL10050 10/100BaseTX> port 0xc800-0xc87f irq 10 at device 6.0 on pci2
miibus3: <MII bus> on ste2
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ste2: Ethernet address: 00:0d:88:53:10:12
ste3: <D-Link DL10050 10/100BaseTX> port 0xcc00-0xcc7f irq 11 at device 7.0 on pci2
miibus4: <MII bus> on ste3
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ste3: Ethernet address: 00:0d:88:53:10:13
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 533355711 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114472MB <WDC WD1200JB-22GVC0 08.02D08> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
 
-Daemon- schrieb:
@dark_angel: Setz dich bitte mir in Verbindung wenn du irgendwas zu dem Problem rausgefunden hast. Danke. :)
Denk mal, dass es bei mir von der Soundkarte (ISA) kommt. Die wird irgendwie nicht erkannt. Muss mal im BIOS nachschaun.
 
tach,

hier meine (Powerbook G4):
Code:
standard timeslicing quantum is 10000 us
vm_page_bootstrap: 316281 free pages
mig_table_max_displ = 70
94 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

using 3276 buffer headers and 3276 cluster IO buffer headers
ADB present:84
FireWire (OHCI) Apple ID 31 built-in now active, GUID 001451ff fe35d246; max speed s400.
CSRHIDTransitionDriver::probe: 
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 9FE2C83A-0C75-35C6-82D2-77B00CB85BF7
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/Hitachi HTS541010G9AT00 Media/IOApplePartitionScheme/Untitled@3
BSD root: disk0s3, major 14, minor 2
CSRHIDTransitionDriver::stop
Jettisoning kernel linker.
Resetting IOCatalogue.
Matching service count = 1
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
NVDANV30HAL loaded and registered.
IPv6 packet filtering initialized, default to accept, logging disabled
UniNEnet: Ethernet address 00:14:51:35:d2:46
AirPortPCI_MM: Ethernet address 00:11:24:aa:19:7f
[HCIController][setupHardware] AFH Is Supported
NVDA,Display-A: vram [a0000000:08000000]
NVDA,Display-B: vram [00000000:01000000]
AirPort:  Link Active:  "RG1" - 0004e2c27902 - chan 1
tun: ready for operation.
tap: ready for operation.
 
Na dann schwangvergleich is cool! *g*

Meine kleines Arbeitstier:

Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Sat Mar 11 16:35:54 CET 2006
    root@diatomic.geh-da-wo-baum.de:/usr/obj/usr/src/sys/DIATOMIC
ACPI APIC Table: <ASUS   A7M266-D>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP (2000.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
real memory  = 2147401728 (2047 MB)
avail memory = 2096386048 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7M266-D> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xe800-0xe803 mem 0xfc000000-0xfdffffff,0xfb800000-0xfb800fff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon AP 9600> port 0xd800-0xd8ff mem 0xe0000000-0xefffffff,0xbf000000-0xbf00ffff irq 16 at device 5.0 on pci1
info: [drm] AGP at 0xfc000000 32MB
info: [drm] Initialized radeon 1.19.0 20050911
pci1: <display> at device 5.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xbe000000-0xbe000fff irq 19 at device 0.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem 0xbd800000-0xbd800fff,0xbd000000-0xbd0fffff irq 18 at device 5.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:e0:8d:1e
pcm0: <Creative CT5880-E> port 0xa400-0xa43f irq 17 at device 6.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pcm0: <Playback: DAC2 / Record: ADC>
atapci1: <Promise PDC20270 UDMA100 controller> port 0xa000-0xa007,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8800-0x880f mem 0xbc800000-0xbc80ffff irq 19 at device 8.0 on pci2
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: Get Max Lun not supported (STALLED)
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A102> at ata0-master UDMA33
acd1: CDRW <CD-RW CDR-6S52/6SG1> at ata0-slave UDMA33
ad4: 39083MB <Maxtor 4D040H2 DAH017K0> at ata2-master UDMA100
ad5: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata2-slave UDMA100
ad6: 39083MB <Maxtor 4D040H2 DAK019K0> at ata3-master UDMA100
ad7: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata3-slave UDMA100
ar0: 39083MB <Promise Fasttrak RAID1> status: READY
ar0: disk0 READY (master) using ad6 at ata3-master
ar0: disk1 READY (mirror) using ad4 at ata2-master
ar1: 117246MB <Promise Fasttrak RAID1> status: READY
ar1: disk0 READY (master) using ad5 at ata2-slave
ar1: disk1 READY (mirror) using ad7 at ata3-slave
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HITACHI_ DK23EA-40 \\0000\\0000> Fixed Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 38154MB (78140160 512 byte sectors: 255H 63S/T 4864C)
cd1 at ata0 bus 0 target 1 lun 0
cd1: <CD-RW CDR-6S52 6SG1> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ar0s1a
info: [drm] Loading R300 Microcode


Lapi und die andren beiden Kisten werden auch bald folgen.
Code:
 
Hier meiner, ist irgendein IBM Desktop mit nem PIII-866..
Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Sat Mar 18 14:14:44 CET 2006
    root@frisbee.int.c6x.de:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (863.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 535691264 (510 MB)
avail memory = 514842624 (490 MB)
ACPI APIC Table: <IBM    CDTPWSPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM CDTPWSPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf8000000-0xfbffffff,0xfea80000-0xfeafffff irq 16 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x74c0-0x74ff mem 0xfebfe000-0xfebfefff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:55:02:2e:09
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7800-0x78ff mem 0xfebff000-0xfebfffff irq 21 at device 13.0 on pci1
ahc0: [GIANT-LOCKED]
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xfb00-0xfb1f irq 19 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcd7ff,0xcd800-0xcdfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA (mono) <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3b0-0x3cf iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 863867952 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 19470MB <Maxtor 32049H2 YAH814Y0> at ata0-master UDMA100
acd0: CDROM <LTN485S/JU04> at ata1-master PIO4
pass0 at ahc0 bus 0 target 4 lun 0
pass0: <SCANNER  2.02> Fixed Scanner SCSI-CCS device 
pass0: 3.300MB/s transfers
Trying to mount root from ufs:/dev/ad0s1a
 
man koennte mich ja fuer verrueckt halten, aber ich hab mir als geburtstagsgeschenk selbst eine neue kleine soekris 4801-60 gekauft:

Code:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 268017664 (261736K)
avail mem = 237674496 (232104K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c5:ce:70
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c5:ce:71
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c5:ce:72
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2120AH>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

266mhz geode-prozessor, 120gig platte und 256mb ram... hmmmmm...
 
So, hier einmal wie im Fotothread versprochen mein K8WE mit zwei Opteron 265 CPUs. Allgemein läuft es mit 6.1 überraschend gut, wer es ernsthaft einsetzten möchte sollte aber auf jeden Fall die nVidia-NICs deaktivieren und sich etwas richtiges einbauen.

Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Tue Mar 28 14:11:33 CEST 2006
    root@hellknight.horst.lan:/usr/src/sys/amd64/compile/HELLKNIGHT
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 265 (1808.34-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f12  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 5637144576 (5376 MB)
avail memory = 4110221312 (3919 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xb0000000-0xb0000fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xb0001000-0xb00010ff irq 21 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub1: device problem (SHORT_XFER), disabling port 8
pcm0: <nVidia nForce4> port 0x1800-0x18ff,0x1400-0x14ff mem 0xb0002000-0xb0002fff irq 22 at device 4.0 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c10-0x1c1f mem 0xb0003000-0xb0003fff irq 23 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> irq 16 at device 5.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:24:15:fb
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:24:15:fb
fwe0: Ethernet address: 02:e0:81:24:15:fb
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0x1c38-0x1c3f mem 0xb0004000-0xb0004fff irq 20 at device 10.0 on pci0
nve0: Ethernet address 00:e0:81:57:42:c2
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:e0:81:57:42:c2
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci8: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pci9: <ACPI PCI bus> on pcib4
pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pci10: <ACPI PCI bus> on pcib5
pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
nve1: <NVIDIA nForce MCP9 Networking Adapter> port 0x2000-0x2007 mem 0xd0401000-0xd0401fff irq 17 at device 10.0 on pci128
nve1: Ethernet address 00:e0:81:57:42:c3
miibus1: <MII bus> on nve1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve1: Ethernet address: 00:e0:81:57:42:c3
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pci129: <ACPI PCI bus> on pcib7
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0-0x7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd07ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: vendor 0x04e1 product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: WACOM CTE-440-U V4.0-3, rev 1.10/4.03, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums1: PRIMAX Cherry USB Mouse, rev 2.00/1.10, addr 4, iclass 3/1
ums1: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 238475MB <Seagate ST3250824AS 3.AAD> at ata2-master SATA300
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW SH-W162C TS10> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad0s2a
kldload: Unsupported file type
nve0: device timeout (10)
 
Dell PowerEdge 2850:
Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Fri Mar 31 11:32:42 CEST 2006
    root@appsrv2.xxx.de:/usr/obj/usr/src/sys/GENERICSMPRAM
MPTable: <DELL     PE 016D     >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100000<NX,LM>
  Hyperthreading: 2 logical CPUs
real memory  = 5368709120 (5120 MB)
avail memory = 4183179264 (3989 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic1: Changing APIC ID to 9
ioapic1: Assuming intbase of 24
ioapic2: Changing APIC ID to 10
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.53> mem 0xd80f0000-0xd80fffff,0xdfdc0000-0xdfdfffff irq 38 at device 14.0 on pci2
amr0: Using 64-bit DMA
amr0: delete logical drives supported by controller
amr0: <LSILogic PERC 4e/Di> Firmware 521X, BIOS H430, 256MB RAM
pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib3
pcib4: <MPTable PCI-PCI bridge> at device 4.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 5.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <MPTable PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 48 at device 7.0 on pci6
em0: Ethernet address: 00:13:72:51:3e:9f
pcib7: <MPTable PCI-PCI bridge> at device 0.2 on pci5
pci7: <PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 49 at device 8.0 on pci7
em1: Ethernet address: 00:13:72:51:3e:a0
pcib8: <MPTable PCI-PCI bridge> at device 6.0 on pci0
pci8: <PCI bus> on pcib8
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
pcib9: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci9: <PCI bus> on pcib9
pci9: <unknown> at device 5.0 (no driver attached)
pci9: <unknown> at device 5.1 (no driver attached)
pci9: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 0xccf0-0xccf7,0xcce4-0xcce7,0xccd8-0xccdf,0xccd0-0xccd3,0xcc70-0xcc7f mem 0xdf5fec00-0xdf5fecff irq 23 at device 6.0 on pci9
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci9: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (port)
ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
Timecounters tick every 1.000 msec
acd0: DVDROM <HL-DT-ST DVD-ROM GDR-8084N/1.01> at ata0-master UDMA33
device_attach: afd0 attach returned 6
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave PIO3
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 8570MB (17551360 sectors) RAID 0 (optimal)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/amrd0s1a
em0: link state changed to UP

Die Tastatur funktionierte beim Starten nicht mehr. Über das Management-Interface ging es.

Die Wechsel-Laufwerk erscheinen mir sonderbar.

Der Kernel ist mit options SMP und PAE statisch compiliert worden, da dynamische Module mit PAE noch immer nicht sauber funktionieren. Ausserdem mussten ältere SCSI-Treiber herausgenommen werden, die kein PAE mögen.
 
Hier der Output von meiner soeben frisch installierten Ultra 5:

Code:
$ dmesg
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 0 0 done
All buffers synced.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Wed Nov  2 22:33:15 UTC 2005
    root@s-dallas.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "tick" frequency 440000000 Hz quality 1000
real memory  = 268435456 (256 MB)
avail memory = 245948416 (234 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 809ed992
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:9e:d9:92
machfb0: <ATI 3D Rage I/II> mem 0xe1000000-0xe1ffffff at device 2.0 on pci1
machfb0: 16 MB aperture at 0xcdd02000, 1 KB registers at 0xe17ffc00
machfb0: 2048 KB SGRAM 62.999 MHz, maximum RAMDAC clock 170 MHz, DSP
machfb0: resolution 1152x900 at 8 bpp
atapci0: <CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f at device 3.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x400-0x4ff mem 0x2000-0x20ff at device 1.0 on pci2
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:44:57:a8:4e
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x100>
Timecounters tick every 1.000 msec
ad0: 14594MB <Seagate ST315310A 3.28> at ata2-master WDMA2
acd0: CDRW <NEC CD-ROM DRIVE:282/3.63> at ata3-master PIO4
Trying to mount root from ufs:/dev/ad0a
$
 
Mein Desktop:

Code:
% dmesg
OpenBSD 3.9-current (GENERIC) #672: Mon Apr  3 16:15:29 MDT 2006
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.83 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 1073250304 (1048096K)
avail mem = 972595200 (949800K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f9) BIOS, date 11/12/04, BIOS32 rev. 0 @ 0xfb3e0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000! 0xd4000/0x1800 0xd6000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
asbtm0 at iic1 addr 0x2d
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 12, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 9
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 5, address 00:0e:a6:0a:22:28
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
"NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 9, nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
skc0 at pci1 dev 4 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Marvell Yukon Lite rev. A3 (0x7): irq 5
sk0 at skc0 port A, address 00:0e:a6:0a:25:a6
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
rl0 at pci1 dev 7 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:48:54:1b:2e:1a
rlphy1 at rl0 phy 0: RTL internal PHY
eap0 at pci1 dev 8 function 0 "Ensoniq CT5880" rev 0x02: irq 11
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio1 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307030>
wd0: 16-sector PIO, LBA, 29314MB, 60036480 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD1600JB-00EVA0>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVD SOHD-167T, 9S16> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PLEXTOR, CD-R PX-W2410A, 1.04> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"NVIDIA nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon 9800 Pro" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9800 Pro Sec" rev 0x00 at pci2 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff45 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
 
FreeBSD 6.0-RELEASE

Code:
workstation# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3400+ (2288.22-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf4a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 2147418112 (2047 MB)
avail memory = 2096607232 (1999 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link1: <ACPI PCI Link LNK2> on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link4: <ACPI PCI Link LNK5> irq 10 on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 5 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 5 on acpi0
pci_link7: <ACPI PCI Link LMAC> on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> irq 12 on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> irq 9 on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 5 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link LSID> on acpi0
pci_link17: <ACPI PCI Link LFID> on acpi0
pci_link18: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link19: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link20: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link21: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link22: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link23: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link30: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link32: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link33: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link34: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link35: <ACPI PCI Link APSJ> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xf0000000-0xf1ffffff at device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf6003000-0xf6003fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xf6004000-0xf6004fff irq 21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6005000-0xf60050ff irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pcm0: <nVidia nForce3 250> port 0xb800-0xb8ff,0xbc00-0xbc7f mem 0xf6001000-0xf6001fff irq 20 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link20: BIOS IRQ 20 for 0.6.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xa000-0xa0ff mem 0xf5000000-0xf50000ff irq 18 at device 10.0 on pci2
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:50:bf:76:a4:82
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
Timecounter "TSC" frequency 2288219020 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 305244MB <WDC WD3200JB-00KFA0 08.05J08> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS10> at ata1-master UDMA33
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED>
Trying to mount root from ufs:/dev/ad0s3a
dc0: link state changed to UP
dc0: TX underrun -- increasing TX threshold
dc0: TX underrun -- increasing TX threshold
pid 59062 (java), uid 1001: exited on signal 6 (core dumped)
pid 59385 (java), uid 1001: exited on signal 6 (core dumped)
pid 59707 (java), uid 0: exited on signal 6 (core dumped)
pid 60052 (java), uid 0: exited on signal 6 (core dumped)
dc0: TX underrun -- increasing TX threshold
pid 49421 (kontact), uid 1001: exited on signal 10 (core dumped)
 
So, dann will ich auch mal ;)
Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Sat Apr 22 14:04:50 CEST 2006
    root@tiger.freebsd.box:/usr/obj/usr/src/sys/TIGER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2998.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 536018944 (511 MB)
avail memory = 515018752 (491 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon AP 9600> port 0xc000-0xc0ff mem 0xe0000000-0xefffffff,0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xfc000000 32MB
info: [drm] Initialized radeon 1.19.0 20050911
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:6e:ca:18:cb
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xfbefe000-0xfbefefff irq 21 at device 13.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Hauppauge Model 61324 D208
bktr0: Detected a MSP3415D-A2 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote control.
pci2: <multimedia> at device 13.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef60-0xef6f irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xe800-0xe8ff,0xee80-0xeebf mem 0xfebff800-0xfebff9ff,0xfebff400-0xfebff4ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub5: vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub5: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 117246MB <Maxtor 6Y120P0 YAR41BW0> at ata0-slave UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-H10A/JL02> at ata1-master UDMA33
acd1: CDRW <LITE-ON LTR-40125S/ZS0J> at ata1-slave UDMA33
ad4: 194481MB <Maxtor 6B200M0 BANC1B70> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
 
Hmm ... mehr muß man hier nicht machen? :)

Asus A8V deluxe, AMD64 3700+ San Diego, 1GB RAM, TV-Karte, 2xSATA, 1xPATA
Code:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #5: Tue Apr 25 17:36:20 CEST 2006
    stell@nexxus.crashmail.de:/usr/obj/usr/src/sys/NEXXUS
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3700+ (2205.02-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f71  Stepping = 1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 1073414144 (1023 MB)
avail memory = 1037303808 (989 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
bktr_mem: memory holder loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6600 GT> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
atapci0: <Promise PDC20378 SATA150 controller> port 0xa800-0xa83f,0xa400-0xa40f,0xa000-0xa07f mem 0xf9a00000-0xf9a00fff,0xf9900000-0xf991ffff irq 18 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
bktr0: <BrookTree 848A> mem 0xdff00000-0xdff00fff irq 16 at device 9.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: Hauppauge Model 60124 C1V
bktr0: Detected a MSP3400C-C6 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo.
skc0: <Marvell Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf9c00000-0xf9c03fff irq 17 at device 10.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:d4:78:a4:4e
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
atapci1: <VIA 6420 SATA150 controller> port 0xd000-0xd007,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xb800-0xb80f,0xb400-0xb4ff irq 20 at device 15.0 on pci0
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9e00000-0xf9e000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xe800-0xe8ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC850 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf800-0xd37ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 2205016603 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 190782MB <Seagate ST3200822A 3.01> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4040B/A300> at ata0-slave UDMA33
ad10: 190782MB <Seagate ST3200826AS 3.03> at ata5-master SATA150
ad12: 190782MB <Seagate ST3200826AS 3.03> at ata6-master SATA150
cd0 at ata0 bus 0 target 1 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4040B A300> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
 
Solche Threads erinnern mich immer an social engineering. Bald kommt der nächste Thread: "zeigt her eure /etc/passwd", anschließend eine Umfrage über die besten Passwörter. :zitter:
 
powerbook

Code:
standard timeslicing quantum is 10000 us
vm_page_bootstrap: 510619 free pages
mig_table_max_displ = 70
97 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.

using 5242 buffer headers and 4096 cluster IO buffer headers
IOPCCard info:   Intel PCIC probe:   TI 1510 rev 00
FireWire (OHCI) Apple ID 6a built-in now active, GUID 001124ff fed60ade; max speed s800.
CSRHIDTransitionDriver::probe: 
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 4043C486-E474-3B6F-B770-7E2E6DEB22EF
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST9120821A Media/IOApplePartitionScheme/Untitled@3
BSD root: disk0s3, major 14, minor 2
CSRHIDTransitionDriver::stop
IOBluetoothHCIController::start Idle Timer Stopped
Jettisoning kernel linker.
Resetting IOCatalogue.
Matching service count = 0
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 6
raw version: Darwin Kernel Version 8.6.0: Tue Mar  7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
raw version: Darwin Kernel Version 8.6.0: Tue Mar  7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
IPv6 packet filtering initialized, default to accept, logging disabled
UniNEnet: Ethernet address 00:11:24:d6:0a:de
AirPortPCI_MM: Ethernet address 00:14:51:86:23:1d
[HCIController][setupHardware] AFH Is Supported
ATY,Jasper_A: vram [b8000000:08000000]
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
ATY,Jasper_B: vram [b8000000:08000000]
USBF:   6779.627        OHCI driver: OHCIRootHubResetSuspendChange bit not sticking. Retrying.
 
Zurück
Oben